Generating, capturing and processing supply current signatures from analogue macros in mixed-signal ASICs

Transient Response Testing is a powerful test technique for analogue macros in mixed-signal electronic systems which with some enhancement can be particularly useful for testing deeply buried circuit structures. Supply current testing is finding widespread application in the digital domain and its use in the analogue domain may lead to integrated test methodologies for mixed-signal systems. This paper shows that by utilizing both these techniques, and a low-cost test shell, deeply buried analogue macros can be partitioned, tested using Transient Response Testing and the resulting response accurately captured from the total device supply current. It also contains an analysis of the noise on the supply current, due to digital circuit activity during testing, and demonstrates a test response analysis technique which is insensitive to it.     

Finite field inversion over the dual basis

In this transaction brief we consider the design of dual basis inversion circuits for GF(2^m). Two architectures are presented-one bit-serial and one bit-parallel-both of which are based on Fermat's theorem. Finite field inverters based on Fermat's theorem have previously been presented which operate over the normal basis and the polynomial basis. However there are two advantages to be gained by forcing inversion circuits to operate over the dual basis. First, these inversion circuits can be utilized in circuits using hardware efficient dual basis multipliers without any extra basis converters. And second, the inversion circuits themselves can take advantage of dual basis multipliers, thus reducing their own hardware levels. As both these approaches require squaring in a finite field to take place, a theorem is presented which allows circuits to be easily designed to carry out squaring over the dual basis     

14C labelling of lignins of normal and bm3 maizes for fermentation studies

[U-¹⁴C] phenylalanine (phe*) and [O¹⁴CH₃] sinapic acid (sin*) were infused into the cut ends of normal and bm3 maizes (anthesis stage) under or above the last node or at mid-internode, with or without the leaf, in light or in darkness. Radioactivity was measured in the organs, and in phenolic constituents of the cell wall and saponified residues of the bases and tops of the apical inter-node. In both maize genotype labelled under the node the radioactivity was distributed more evenly in the organs with sin* than with phe*. Infusion above the node and at mid-internode greatly increased radioactivity in the bases and tops, respectively. Removal of the leaf only slightly increased the radioactivity, mainly in the bases, and no clear-cut effect of darkness was observed. Phe* labelled the phenolic acids and the three lignin units, but the syringyl units of bm3 maize were only slightly labelled. Sin* specifically labelled the syringyl units, which represented the least condensed fraction of lignins. Both the native and labelled lignins were highly alkali soluble. There were differences in lignin biogenesis between the bases and tops, and between normal and bm3 maizes. The newly formed lignins were slightly different from the native lignins but had similar types of heterogeneity, with variations in the internode and between genotypes similar to those in native lignins. Provided due allowance is made for the distinguishing characteristics of newly formed lignins, the [¹⁴C-lignin] cell walls, which are strongly labelled on complementary structures, seem suitable model substrates for fermentation studies.     

Ligand‐Free Synthesis of Aluminum‐Doped Zinc Oxide Nanocrystals and their Use as Optical Spacers in Color‐Tuned Highly Efficient Organic Solar Cells

The color of polymer solar cells using an opaque electrode is given by the reflected light, which depends on the composition and thickness of each layer of the device. Metal‐oxide‐based optical spacers are intensively studied in polymer solar cells aiming to optimize the light absorption. However, the low conductivity of materials such as ZnO and TiO₂ limits the thickness of such optical spacers to tenths of nanometers. A novel synthesis route of cluster‐free Al‐doped ZnO (AZO) nanocrystals (NCs) is presented for solution processing of highly conductive layers without the need of temperature annealing, including thick optical spacers on top of polymer blends. The processing of 80 nm thick optical spacers based on AZO nanocrystal solutions on top of 200 nm thick polymer blend layer is demonstrated leading to improved photocurrent density of 17% compared to solar cells using standard active layers of 90 nm in combination with thin ZnO‐based optical spacers. These AZO NCs also open new opportunities for the processing of high‐efficiency color tuned solar cells. For the first time, it is shown that applying solution‐processed thick optical spacer with polymer blends of different thicknesses can process solar cells of similar efficiency over 7% but of different colors.     

Rapidly tunable optical add-drop multiplexer utilising relaxed beam splitters

A polarisation-independent four-port electro-optic tunable filter in the 1530 nm wavelength regime utilising non-polarising relaxed beam splitters and strain-induced polarisation converters on LiNbO₃ with 16 nm tuning range and 46 ns tuning speed is reported.     

Détermination des perturbations induites aux extrémités d’une ligne blindée soumise à une excitation ponctuelle de courant

This article allows the determination of the induced perturbations at the ends of the coaxial line in wide frequency band enough. The perturbation source is a current direct point injection into the cable screen in any position. For this, we have applied the theory of the state variables, with foundation of the quasi-TEM approximation, in order to simulate the coaxial line above a ground level that has a finished conductivity. This allows us to supply the current and voltage expressions at the ends of the line as their analytic forms for any conditions of charge. Next, the elaborate objective is to verify experimentally on concrete applications if the test obtained results confirm the theoretical expectations supplied by calculation code finalizing.     

Accurate surface potential determination in Schottky diodes by use of correlated current and capacitance voltage measurements. Application to n–InP

Based on current voltage (I-V_g) and capacitance voltage (C-V_g) measurements, a reliable procedure is proposed to determine the effective surface potential V_d.V_g/ in Schottky diodes. In the framework of thermionic emission, our analysis includes both the effect of the series resistance and the ideality factor, even voltage dependent. This technique is applied to n-type indium phosphide (n-InP) Schottky diodes with and without an interfacial layer and allows us to provide an interpretation of the observed peak on the C-V_g measurements. The study clearly shows that the depletion width and the flat band barrier height deduced from C-V_g, which are important parameters directly related to the surface potential in the semiconductor, should be estimated within our approach to obtain more reliable information.     

Wavelength tunable CW Raman fibre ring laser operating at 1486-1551nm

A continuous-wave, wavelength tunable Raman fibre ring laser has been demonstrated operating at 1485-1551 nm with peak output power of over 400 mW, pumped at 1420 nm by a 1.58 W fibre laser     

Estimation of co-channel signals with linear complexity

To increase wireless system capacity using co-channel signals and multiple receiver antennas, we develop the partitioned Viterbi algorithm (PVA). The PVA estimation complexity increases linearly with each additional co-channel signal rather than exponentially as it does with joint maximum-likelihood sequence estimation (MLSE). The estimation problem involves multiple signals simultaneously transmitted and observed through slow-fading, frequency-selective channels. Although transmission is assumed to be in bursts according to a time-division multiple-access scheme, more than one signal can occupy the same time and frequency slot (these signals are referred to as “co-channel” signals). Separation and estimation of the symbol bursts is accomplished by exploiting channel differences, PVA estimation consists of a set of Viterbi detectors, one per signal, that operate in parallel with cross-coupling to allow approximate interference cancellation by means of tentative decisions. The forward filter of a decision feedback equalizer (DFE) is used to “prefilter” received signals prior to PVA estimation. Prefiltering delays the energy of interfering signals so that tentative decisions become reliable enough to use. Simulation results show PVA performance remains near-optimal with respect to the performance of joint MLSE