Long-term effects of operating temperature and sulphate addition on the methanogenic community structure of anaerobic hybrid reactors

The diversity, population dynamics, and activity profiles of methanogens in anaerobic granular sludges from two anaerobic hybrid reactors treating a molasses wastewater both mesophilically (37 degrees C) and thermophilically (55 degrees C) during a 1081 day trial were determined. The influent to one of the reactors was supplemented with sulphate, after an acclimation period of 112 days, to determine the effect of competition with sulphate-reducing bacteria on the methanogenic community structure. Sludge samples were removed from the reactors at intervals throughout the operational period and examined by amplified ribosomal DNA (rDNA) restriction analysis (ARDRA) and partial sequencing of 16S rRNA genes. In total, 18 operational taxonomic units (OTUs) were identified, 12 of which were sequenced. The methanogenic communities in both reactors changed during the operational period. The seed sludge and the reactor biomass sampled during mesophilic operation, both in the presence and absence of sulphate, was characterised by a predominance of Methanosaeta spp. Following temperature elevation, the dominant methanogenic sequences detected in the non-sulphate supplemented reactor were closely related to Methanocorpusculum parvum. By contrast, the dominant OTUs detected in the sulphate-supplemented reactor upon temperature increase were related to the hydrogen-utilising methanogen, Methanobacterium thermoautotrophicum. The observed methanogenic community structure in the reactors correlated with the operational performance of the reactors during the trial and with physiological measurements of the reactor biomass. Both reactors achieved chemical oxygen demand (COD) removal efficiencies of over 90% during mesophilic operation, with or without sulphate supplementation. During thermophilic operation, the presence of sulphate resulted in decreased reactor performance (effluent acetate concentrations of >3000 mg/l and biogas methane content of <25%). It was demonstrated that methanogenic conversion of acetate at 55 degrees C was extremely sensitive to inhibition by sulphide (50% inhibition at 8-17 mg/l unionised sulphide at pH 7.6-8.0), while the conversion of H(2)/CO(2) methanogenically was favoured. The combination of experiments carried out demonstrated the presence of specific methanogenic populations during periods of successful operational performance.     

Staged and non-staged anaerobic filters: Microbial activity segregation,hydrodynamic behaviour and performance

This work describes a comparative study of staged and non-staged anaerobic filters for treating a synthetic dairy waste under similar operating conditions. The effect of increasing the substrate concentration from 3 to 12 g COD dm⁻³ at a constant hydraulic residence time (HRT) of 2 days was evaluated with respect to overall reactor performance, biogas production, volatile fatty acids profiles along the height, methanogenic and acidogenic activity distribution, and hydrodynamic behaviour. The potential maximum specific methanogenic activity against acetate, hydrogen, propionate and butyrate and the lactose specific activity were determined for sludge sampled from three different points in each reactor, under two operating conditions (influent COD of 3 and 9 g COD dm⁻³). Although all trophic groups involved in the anaerobic process were found throughout the reactors, it was possible to identify different specific sludges at different heights in both reactors. Performances of the two configurations were very similar under the operating conditions tested and the plug flow behaviour of the staged reactor was clearly reduced when the influent concentration increased from 3 to 9 g COD dm⁻³. © 1998 Society of Chemical Industry     

Physical properties of novel free-standing polymer-nanotube thin films

Novel polymer-nanotube composites have been fabricated by the introduction of polymeric material into the free volume contained in carbon nanotube (CNT) mats grown by chemical vapour deposition. The resulting composite material can then be peeled from the substrate to give a free-standing film, the properties of which are controlled by the nanotubes. The nanotube mat acts as a percolative network resulting in increases in surface and bulk conductivities by factors of 10⁷ and 10⁸, respectively. The presence of CNTs also causes the Young’s Modulus of the polymer film to double. It is shown that the presence of CNTs has no effect on the morphology of the polymer itself.     

Biogenic amines and the importance of starter cultures for malolactic fermentation

Biogenic amines are compounds produced mainly by microorganisms from the decarboxylation of some amino acids which may cause several health issues in susceptible people. In the winemaking process, one of the factors with the greatest impact on the final concentration of biogenic amines in wine is the malolactic fermentation, which mainly involves the action of lactic acid bacteria. This article gathers scientific literature on the importance of the use of inoculation in winemaking, especially for the potential formation of biogenic amines in spontaneous fermentations, with emphasis on malolactic fermentation. It establishes the set of attributes that influence the formation of biogenic amines in winemaking and aspects related to their toxicity, especially histamine and tyramine. With the growing interest of the market in products with less chemical appeal, the safety of wines, whether from non‐conventional or traditional winemaking, must increasingly be observed. Therefore, the importance of using cultivated starter cultures is discussed, along with the safety of organic wines and the presentation of articles that seek to reconcile the production of organic wine with the preservation of the ‘microbiological terroir’ in a safe way, using selected wild yeasts and lactic acid bacteria.     

Synthesis and characterisation of controllably functionalised polyaniline nanofibres

A novel method for functionalising solution based polyaniline (PAni) nanofibres is reported whereby the degree of side-chain attachment can be controllably altered. The covalent attachment of functional side-groups to the surface of PAni nanostructures is achieved by post-polymerisation reflux in the presence of a nucleophile and the functionalised nanomaterial can be purified by simple centrifugation. The technique is therefore easily scalable. We demonstrate that control over the extent of side-chain attachment can be achieved simply by altering the amount of nucleophile added during reflux. We provide evidence that covalently attached carboxylate side-chains influence the doping mechanism of polyaniline and can be used to introduce self-doping behaviour. Acid functionalised nanofibres remain redox active and retain their optical switching capabilities in response to changes in the local chemical environment, thus making them suitable for adaptive sensing applications.     

Reusable Shape-Memory Photonic Crystal Paper for Pin-Printing and High-Resolution Press Printing

Rewritable photonic crystal (PC) paper has the potential to significantly reduce the consumption of forest resources in the printing industry, while also being environmentally friendly and efficient. However, traditional PC papers based on solvent or photothermal responses can lead to diffusion, which can hinder printing accuracy. In this study, a novel rewritable PC paper compatible with pin-printing is presented based on a pressure-responsive shape-memory PC paper. High-resolution printing can be realized by both computer-programmed 3D-printed seals and pin-printing techniques. The information written on this PC rewritable paper can be erased by water, enabling the paper to be rewritten and reused at least 8 times without any change in performance. Furthermore, the information stored on the PC paper is stable and can be stored in ordinary environments for at least 6 months without fading. The PC paper has the capability of multicolor printing with a precision finer than 100 μm and has potential in office papers, smart price tags, and anti-counterfeiting labels.