Statistical tolerance analysis of a hyperstatic mechanism,using system reliability methods

The quality level of a mechanism can be evaluated a posteriori after several months by following the number of warranty returns. However, it is more interesting to evaluate a predicted quality level in the design stage: this is one of the aims of statistical tolerance analysis. A possible method consists of computing the defect probability (P_D) expressed in ppm. It represents the probability that a functional requirement will not be satisfied in mass production. For assembly reasons, many hyperstatic mechanisms require gaps, which their functional requirements depend on. The defect probability assessment of such mechanisms is not straightforward, and requires advanced numerical methods. This problem particularly interests the VALEO W.S. company, which experiences problems with an assembly containing gaps. This paper proposes an innovative methodology to formulate and compute the defect probability of hyperstatic mechanisms with gaps in two steps. First, a complex feasibility problem is converted into a simpler problem. Then the defect probability is efficiently computed thanks to system reliability methods and the m-dimensional multivariate normal distribution Φ_m. Finally, a sensitivity analysis is provided to improve the original design. The whole approach is illustrated with an industrial case study, but can be adapted to other similar problems.     

Comparison of an effect-model-law-based method versus traditional clinical practice guidelines for optimal treatment decision-making: application to statin treatment in the French population

Healthcare authorities make difficult decisions about how to spend limited budgets for interventions that guarantee the best cost-efficacy ratio. We propose a novel approach for treatment decision-making, OMES—in French: Objectif thérapeutique Modèle Effet Seuil (in English: Therapeutic Objective–Threshold–Effect Model; TOTEM). This approach takes into consideration results from clinical trials, adjusted for the patients'' characteristics in treatment decision-making. We compared OMES with the French clinical practice guidelines (CPGs) for the management of dyslipidemia with statin in a computer-generated realistic virtual population, representing the adult French population, in terms of the number of all-cause deaths avoided (number of avoided events: NAEs) under treatment and the individual absolute benefit. The total budget was fixed at the annual amount reimbursed by the French social security for statins. With the CPGs, the NAEs was 292 for an annual cost of 122.54 M€ compared with 443 with OMES. For a fixed NAEs, OMES reduced costs by 50% (60.53 M€ yr⁻¹). The results demonstrate that OMES is at least as good as, and even better than, the standard CPGs when applied to the same population. Hence the OMES approach is a practical, useful alternative which will help to overcome the limitations of treatment decision-making based uniquely on CPGs.     

Reliability-based design optimization applied to structures submitted to random fatigue loads

Structural and Multidisciplinary Optimization - The reliability-based design optimization (RBDO) aims to find the most balanced design through a compromise between cost and safety when...     

Genetic Distance and Age Affect the Cuticular Chemical Profiles of the Clonal Ant Cerapachys biroi

Although cuticular hydrocarbons (CHCs) have received much attention from biologists because of their important role in insect communication, few studies have addressed the chemical ecology of clonal species of eusocial insects. In this study we investigated whether and how differences in CHCs relate to the genetics and reproductive dynamics of the parthenogenetic ant Cerapachys biroi. We collected individuals of different ages and subcastes from several colonies belonging to four clonal lineages, and analyzed their cuticular chemical signature. CHCs varied according to colonies and clonal lineages in two independent data sets, and correlations were found between genetic and chemical distances between colonies. This supports the results of previous research showing that C. biroi workers discriminate between nestmates and non-nestmates, especially when they belong to different clonal lineages. In C. biroi, the production of individuals of a morphological subcaste specialized in reproduction is inversely proportional to colony-level fertility. As chemical signatures usually correlate with fertility and reproductive activity in social Hymenoptera, we asked whether CHCs could function as fertility-signaling primer pheromones determining larval subcaste fate in C. biroi. Interestingly, and contrary to findings for several other ant species, fertility and reproductive activity showed no correlation with chemical signatures, suggesting the absence of fertility related CHCs. This implies that other cues are responsible for subcaste differentiation in this species.     

In Situ X-ray Diffraction and Young's Modulus Measurement during Heat Treatment of High-Alumina Cement Castables

In situ Young's modulus measurements and synchrotron radiation-energy dispersive diffraction have been used to study changes in high-alumina castables subjected to heat treatment from room temperature to 1600°C. Particular attention was paid to the hydrate "conversion" process and the effects of high temperature.     

Microstructural characterization of U-7Mo/Al-Si alloy matrix dispersion fuel plates fabricated at 500 °C

The starting microstructure of a dispersion fuel plate will impact the overall performance of the plate during irradiation. To improve the understanding of the as-fabricated microstructures of U-Mo dispersion fuel plates, particularly the interaction layers that can form between the fuel particles and the matrix, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses have been performed on samples from depleted U-7Mo (U-7Mo) dispersion fuel plates with either Al-2 wt.% Si(Al-2Si) or AA4043 alloy matrix. It was observed that in the thick interaction layers, U(Al, Si)3 and U6Mo4Al43 were present, and in the thin interaction layers, (U, Mo) (Al, Si)3, U(Al, Si)4, U3Si3Al2, U3Si5, and possibly USi-type phases were observed. The U3Si3Al2 phase contained some Mo. Based on the results of this investigation, the time that a dispersion fuel plate is exposed to a relatively high temperature during fabrication will impact the nature of the interaction layers around the fuel particles. Uniformly thin, Si-rich layers will develop around the U-7Mo particles for shorter exposure times, and thicker, Si-depleted layers will develop for the longer exposure times.     

Impact of oxygen transport properties on the kinetic modeling of polypropylene thermal oxidation. II. Effect of oxygen diffusivity

The kinetic model, established in a previous article (François‐Heude et al., J. Appl. Polym. Sci., in press) to predict the homogeneous oxidation in iPP films typically thinner than 100 µm, is now extended to simulate the oxidation profiles in thicker plates by coupling the oxygen diffusion and its consumption by the chemical reactions. In this perspective, oxygen transport properties (namely oxygen solubility, diffusivity, and permeability) are measured by permeametry on a reference iPP. These values are compared with an exhaustive compilation of literature data to evaluate their variability among the whole iPP family, which one has been reasonably ascribed to initial differences in polymer morphology, but also to evaluate their consistency, especially their temperature dependence between 20 and 140°C. Failing to simulate oxidation profiles, the kinetic model is then used as an inverse resolution method for estimating more satisfactory values of oxygen transport properties. It is thus evidenced that the crystallinity changes induced by thermal oxidation largely explains the dramatic decrease in oxygen penetration toward the sample core just after the induction period. A strategy aimed for introducing the relationship between the polymer crystalline morphology and oxygen transport properties into the kinetic model is given in the graphical abstract, although the effect of polymer polarity remains to be established prior to this implementation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41562.     

Optimal design program for gravity sanitary sewers

The development and implementation of a Fortran computer program called OGSDP to design a least-cost gravity sanitary sewer system are presented. OGSDP is a model that finds the least-cost design for a non-looping, gravity sanitary sewerage system for a given set of design parameters, costs and lay-out. The final design is the least-cost combination of pipe sizes, upstream and downstream invert elevations (of each pipe) and the corresponding manhole sizes. OGSDP respects most Ten States Standards' (1978) design guidelines. OGSDP determines an initial sewer system design using a heuristic procedure, and then improves the design using discrete dynamic programming with successive approximations to obtain the final least-cost design. It is a practical and efficient tool in the design of sanitary sewer systems.     

Novel Redox-Dependent Esterase Activity (EC 3.1.1.2) for DJ-1: Implications for Parkinson’s Disease

Mutations the in human DJ-1 (hDJ-1) gene are associated with early-onset autosomal recessive forms of Parkinson’s disease (PD). hDJ-1/parkinsonism associated deglycase (PARK7) is a cytoprotective multi-functional protein that contains a conserved cysteine-protease domain. Given that cysteine-proteases can act on both amide and ester substrates, we surmised that hDJ-1 possessed cysteine-mediated esterase activity. To test this hypothesis, hDJ-1 was overexpressed, purified and tested for activity towards 4-nitrophenyl acetate (pNPA) as µmol of pNPA hydrolyzed/min/mg·protein (U/mg protein). hDJ-1 showed maximum reaction velocity esterase activity (V_max = 235.10 ± 12.00 U/mg protein), with a sigmoidal fit (S_0.5 = 0.55 ± 0.040 mM) and apparent positive cooperativity (Hill coefficient of 2.05 ± 0.28). A PD-associated mutant of DJ-1 (M26I) lacked activity. Unlike its protease activity which is inactivated by reactive oxygen species (ROS), esterase activity of hDJ-1 is enhanced upon exposure to low concentrations of hydrogen peroxide (<10 µM) and plateaus at elevated concentrations (>100 µM) suggesting that its activity is resistant to oxidative stress. Esterase activity of DJ-1 requires oxidation of catalytic cysteines, as chemically protecting cysteines blocked its activity whereas an oxido-mimetic mutant of DJ-1 (C106D) exhibited robust esterase activity. Molecular docking studies suggest that C106 and L126 within its catalytic site interact with esterase substrates. Overall, our data show that hDJ-1 contains intrinsic redox-sensitive esterase activity that is abolished in a PD-associated mutant form of the hDJ-1 protein.     

Pentadecane functionalized graphite oxide sheets as a tool for the preparation of electrical conductive polyethylene/graphite oxide composites

Covalent functionalization of pentadecane-decorated thermally reduced graphite oxide (GO) sheets has been studied as a tool for the preparation of polyethylene/GO composites exhibiting rheological and electrical percolation thresholds. It was accomplished through pentadecane based radical addition onto unsaturated bonds located on the GO sheets' surface using dicumyl peroxide as hydrogen abstractor. This chemical functionalization influences the affinity of the formed pentadecane grafted GO sheets for various solvents. Then, the compounding of the composites pentadecane grafted GO/PE was performed at a processing temperature of 140 °C with 25, 20, 15, 10, 8 and 5 wt% loadings. Rheological and electrical percolation thresholds were found between 10 and 15 wt% for polyethylene/pentadecane functionalized graphene oxide composites while the composite graphite/PE at the same loading percentage did not reach any percolation threshold.