Wheat gluten-coated papers for bio-based food packaging: Structure,surface and transfer properties

The objective of the present work was to understand how the structural, surface, water vapour and gas barrier properties of wheat gluten (WG) coated paper could be influenced by the features of paper. For this purpose, a surface treated paper (TP) and an untreated paper (UTP) were compared. Penetration of WG-coating into the bulk of paper was more pronounced in UTP than TP. This led to the formation of a significant junction zone resulting in an interpenetrated structure for WG–UTP, suggesting a composite-like structure, while a bi-layer one was obtained for WG–TP. Differences in WG penetration were related to the hydrophilicity, roughness and porosity of the paper used. Even though the extent of penetration did not greatly affect the surface properties (water and oil resistance), the transfer properties (water vapour, O₂ and CO₂) of WG-coated papers were significantly improved when WG-coating highly penetrated: while the WG–TP behaved as a micro-perforated material, the WG–UTP behaved as WG-film.     

Timed verification of the generic architecture of a memory circuit using parametric timed automata

Using a variant of Clariso-Cortadella’s parametric method for verifying asynchronous circuits, we analyse some crucial timing behaviors of the architecture of SPSMALL memory, a commercial product of STMicroelectronics. Using the model of parametric timed automata and model checker HYTECH, we formally derive a set of linear constraints that ensure the correctness of the response times of the memory. We are also able to infer the constraints characterizing the optimal setup timings of input signals. We have checked, for two different implementations of this architecture, that the values given by our model match remarkably with the values obtained by the designer through electrical simulation. Partially supported by project MEDEA+ Blueberries. A preliminary version appeared in the Proceedings of 4th International Conference on Formal Modelling and Analysis of Timed Systems (FORMATS’06), Sept. 2006.     

Flow modelling of quasi-Newtonian fluids in two-scale fibrous fabrics

Permeability is the fundamental macroscopic material property needed to quantify the flow in a fibrous medium viewed as a porous medium. Composite processing models require the permeability as input data to predict flow patterns and pressure fields. In a previous work, the expressions of macroscopic permeability were derived in a double-scale porosity medium for both Newtonian and generalized Newtonian (shear-thinning) resins. In the linear case, only a microscopic calculation on a representative volume is required, implying as many microscopic calculations as there are representative microscopic volumes in the whole fibrous structure. In the non-linear case, and even when the porous microstructure can be described by a unique representative volume, a large number of microscopic calculations must be carried out as the microscale resin viscosity depends on the macroscopic velocity, which in turn depends on the permeability that results from a microscopic calculation. An original and efficient offline-online procedure was proposed for the solution of non-linear flow problems related to generalized Newtonian fluids in porous media. In this paper, this procedure is generalized to quasi-Newtonian fluids in order to evaluate the effect of extensional viscosity on the resulting upscaled permeability. This work constitutes a natural step forward in the definition of equivalent saturated permeabilities for linear and non-linear fluids.     

Moral Hazard and the Role of Users in Learning from Accidents1

Most technological accidents studied in the literature consist of a single event occurring in a single location (Challenger, Chernobyl, Ariane 5, Bhopal, etc.). However, a significant number of accidents comprise a series of incidents taking place in multiple and unconnected locations. This may happen whenever a given technology is used by multiple decentralized users – as is the case for medical devices or diving equipment, for instance. In this paper, we argue that such a structural characteristic raises specific problems and issues in terms of learning from accidents. We focus on a specific issue and problem: information asymmetries between the users and the manufacturer in favor of the manufacturer and the risk of “moral hazard” that they can induce. Using second hand information on a well known case (Therac‐25), we show how the manufacturer behaved opportunistically when it came to learn from a series of decentralized incidents and we argue that this opportunism was made possible by information asymmetries. Following predictions from the principal‐agent theory, we then argue that for users to monitor manufacturers' behavior in a sense favorable to the taking place of learning from accident, it is necessary to ensure communication among users of risky technologies. Besides reducing information asymmetries conducive to moral hazard this would moreover improve risk prevention. Yet, as communication among decentralized users is unlikely to arise spontaneously in most cases, we argue that this makes the case for public intervention in the form of publicly sponsored user groups.     

Standardized MR protocol for the evaluation of MRA sequences and/or contrast agents effects in high-degree arterial stenosis analysis

Purpose To investigate the relative role of high resolution (spatial or temporal) magnetic resonance angiography (MRA) sequence and of contrast agent properties in the evaluation of high-degree arterial stenosis. Methods We qualitatively and quantitatively studied both 50 and 95% (300 μm diameter) stenosis of a 6 mm arterial phantom with two contrast agents (CA), Gd-DOTA (r₁ =2.9 mM⁻¹ s⁻¹) versus P760 (r₁ =25 mM⁻¹ s⁻¹) at several CA concentrations, including arterial peak concentration after injection of either a single or double dose of CA, using either a high temporal (booster) or high spatial (HR) resolution 3D MRA sequences. Experimental data were then compared to theoretical data. Results With the 3D HR sequence, both visual and quantitative analysis were significantly better compared to the 3D booster sequence, at each phantom diameter. Quantitative analysis was significantly improved by injection of a double versus a single dose of each CA (Gd-DOTA or P760), primarily in high degree stenosis. Conclusion Combined MRA spatial resolution and high CA efficiency are mandatory to correctly evaluate high degree stenosis.     

Superparamagnetic relaxation evidences large surface contribution for the magnetic anisotropy of MnFe<Subscript>2</Subscript>0<Subscript>4</Subscript> nanoparticles of ferrofluids

Manganese ferrite nanoparticles, in the size range 3.3–9.0 nm, are prepared by a hydrothermal coprecipitation process and peptized in aqueous solution. The magnetization curves recorded at room temperature on diluted colloidal sols allow characterizing the distribution of magnetic moment by using a simple Langevin formalism. Mössbauer spectroscopy measurements performed on powder samples at 77 K exhibit a quadrupolar doublet which intensity grows at the expense of the hyperfine sextet pattern as the nanoparticles mean size decreases. The magnetic dynamics behavior is then investigated by measurements of magnetic hysteretic properties at 5 K and temperature dependence of the zero field cooling (ZFC) susceptibility. The values found for the effective anisotropy constant and the dependence of the irreversibility field, inversely proportional to the reference size, clearly indicate that the magnetic anisotropy of our nanoparticles finds its origin on the disordered surface layer.     

High pass filter with above IC integrated SrTiO3 high K MIM capacitors

This paper describes realization and characterization of SrTiO₃ (STO) high K MIM capacitors above BiCMOS integrated circuit (IC). These capacitances are connected to IC and are used as coupling capacitors in order to realize a high pass filter. Surface capacitance achieved is 10 nF/mm² with capacitance value of 1.2 nF. The process for STO MIM fabrication does not exceed 400 °C, which is compatible with interconnections. Typical K and dielectric losses values obtained are, respectively 110% and 2%. Yield obtained reaches 83% for capacitors. A functional high pass filter using these STO capacitors was realized in this study. It exhibits a cut-off frequency at 6.5 kHz and a constant gain at higher frequencies of −1.3 dB.     

Semi-classical signal analysis

This study introduces a new signal analysis method, based on a semi-classical approach. The main idea in this method is to interpret a pulse-shaped signal as a potential of a Schrödinger operator and then to use the discrete spectrum of this operator for the analysis of the signal. We present some numerical examples and the first results obtained with this method on the analysis of arterial blood pressure waveforms.     

Nitrous oxide production kinetics during nitrate reduction in river sediments

A significant amount of nitrogen entering river basins is denitrified in riparian zones. The aim of this study was to evaluate the influence of nitrate and carbon concentrations on the kinetic parameters of nitrate reduction as well as nitrous oxide emissions in river sediments in a tributary of the Marne (the Seine basin, France). In order to determine these rates, we used flow-through reactors (FTRs) and slurry incubations; flow-through reactors allow determination of rates on intact sediment slices under controlled conditions compared to sediment homogenization in the often used slurry technique. Maximum nitrate reduction rates (R_m) ranged between 3.0 and 7.1 μg N g⁻¹ h⁻¹, and affinity constant (K_m) ranged from 7.4 to 30.7 mg N-NO₃⁻ L⁻¹. These values were higher in slurry incubations with an R_m of 37.9 μg N g⁻¹ h⁻¹ and a K_m of 104 mg N-NO₃⁻ L⁻¹. Nitrous oxide production rates did not follow Michaelis-Menten kinetics, and we deduced a rate constant with an average of 0.7 and 5.4 ng N g⁻¹ h⁻¹ for FTR and slurry experiments respectively. The addition of carbon (as acetate) showed that carbon was not limiting nitrate reduction rates in these sediments. Similar rates were obtained for FTR and slurries with carbon addition, confirming the hypothesis that homogenization increases rates due to release of and increasing access to carbon in slurries. Nitrous oxide production rates in FTR with carbon additions were low and represented less than 0.01% of the nitrate reduction rates and were even negligible in slurries. Maximum nitrate reduction rates revealed seasonality with high potential rates in fall and winter and low rates in late spring and summer. Under optimal conditions (anoxia, non-limiting nitrate and carbon), nitrous oxide emission rates were low, but significant (0.01% of the nitrate reduction rates).