The territorial and landscape impacts of photovoltaic systems: Definition of impacts and assessment of the glare risk

The installation and operation of systems that exploit solar energy through photovoltaic conversion, recently promoted in some European countries by new sell-back tariffs, is a relevant transformation of the territory for various reasons (land use, elimination of the existing vegetation, visual impact on the components of the landscape, microclimate change, glare from the reflection of the direct sunlight). The weak energy intensity of the solar source coupled with the low conversion efficiency of the photovoltaic cells, make the physical dimensions of such systems relevant and, with them, also the environmental, territorial and landscape impacts that basically depend on the physical extent of the system. If it is well known that an incentive to the exploitation of renewable sources is one of the features of the policy of land conservation, including the one of the protected areas, at the same time the concerns of local communities and governments about the environmental, territorial and landscape impacts of this technology are increasing rapidly.Given this picture, this work is intended to clarify the territorial impacts of the ground mounted photovoltaic systems. Later, the paper concentrates on a specific impact, which is the assessment of the risk of glare by reflection of direct sunlight from the surfaces of photovoltaic modules. The methodologies that can be used to assess this impact and the outcomes of an evaluation carried out for a 5000 m² PV system currently designed on a hilly territory in Italy are presented.     

Residual Stresses in Alumina/Zirconia Composites: Effect of Cooling Rate and Grain Size

Alumina/zirconia composites with various compositions at the zirconia-rich part of the phase diagram have been prepared with various grain sizes of the starting alumina powders. After firing under identical conditions, the pellets have been cooled systematically, changing the cooling rates from 0.5 to 8000 K/min. Subsequently, the residual stresses in alumina have been determined by monitoring the frequency shifts of the R ₂ luminescence line of alumina (14 430 cm⁻¹). The data indicate that the stress in alumina is compressive in all cases, with increasing absolute values of the stress with decreasing alumina content. Within the same composition, the residual stress as a function of the cooling rate presents a minimum for values between 10 and 100 K/min, with no clear dependence on the alumina or zirconia grain size. An interpretation of the experimental data in terms of a Coble-type diffusional relaxation applies for intermediate cooling rates (from 10 to 800 K/min), but it fails to account for the large stresses at low cooling rates. The width of the stress distribution is narrow (∼150 MPa) and constant for all compositions and grain sizes at low cooling rates, but it increases for cooling rates >10 K/min, depending on the grain size but not on the composition. For fast cooling rates, a correlation is found when reporting the average width of the stress distribution as function of the average sintered grain-size distribution of alumina. Overall, zirconia grain size seems to influence the average stress, whereas alumina grain size determines the stress distribution.     

Nitro derivatives of PEEK‐WC

Nitrated poly(oxa‐p‐phenylene‐3,3‐phthalido‐p‐phenylene‐oxa‐p‐phenylene‐ oxy‐phenylene) (PEEK‐WC) with various average degrees of substitution was obtained by reaction with several nitrating agents. By working under controlled reaction conditions, little degradation of the parent polymer is observed. The nitro derivatives of PEEK‐WC show a high thermal stability, and are able to form membranes by means of phase inversion technique. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1037–1045, 2001     

Nuclear reactor dynamics on-line estimation by Locally Recurrent Neural Networks

In this paper, the Causal Recursive Back-Propagation (CRBP) algorithm is employed to train on-line an Infinite Impulse Response–Locally Recurrent Neural Network (IIR–LRNN) for modelling the dynamics of a next-generation nuclear reactor. The results demonstrate the advantages of the on-line training over the batch-mode learning in the reconstruction of complex nonlinear dynamic relationships.     

Numerical simulations of the internal flow pattern of a vortex pump compared to the Hamel-Oseen vortex

We did a numerical study of the internal flow field of a vortex pump. Five operating points were considered and validated through a measured characteristic curve. The internal flow pattern of a vortex pump was analyzed and compared to the Hamel-Oseen vortex model. The calculated flow field was assessed with respect to the circumferential velocity, the vorticity and the axial velocity. Whereas the trajectories of the circumferential velocity were largely in line with the Hamel-Oseen vortex model, the opposite was true for vorticity. Only the vorticity at strong part load was in line with the predictions of the Hamel-Oseen vortex model. We therefore compared the circumferential velocity and vorticity for strong part load operation to the analytical predictions of the Hamel-Oseen vortex model. The simulated values were below the analytical values. The study therefore suggests that a vortex similar to the Hamel-Oseen vortex is only present at the strong part load operation.     

A syntax-preserving error resilience tool for JPEG 2000 based on error correcting arithmetic coding.

JPEG 2000 is the novel ISO standard for image and video coding. Besides its improved coding efficiency, it also provides a few error resilience tools in order to limit the effect of errors in the codestream, which can occur when the compressed image or video data are transmitted over an error-prone channel, as typically occurs in wireless communication scenarios. However, for very harsh channels, these tools often do not provide an adequate degree of error protection. In this paper, we propose a novel error-resilience tool for JPEG 2000, based on the concept of ternary arithmetic coders employing a forbidden symbol. Such coders introduce a controlled degree of redundancy during the encoding process, which can be exploited at the decoder side in order to detect and correct errors. We propose a maximum likelihood and a maximum a posteriori context-based decoder, specifically tailored to the JPEG 2000 arithmetic coder, which are able to carry out both hard and soft decoding of a corrupted code-stream. The proposed decoder extends the JPEG 2000 capabilities in error-prone scenarios, without violating the standard syntax. Extensive simulations on video sequences show that the proposed decoders largely outperform the standard in terms of PSNR and visual quality.     

Fast modular exponentiation of large numbers with large exponents

In many problems, modular exponentiation |x^b|_m is a basic computation, often responsible for the overall time performance, as in some cryptosystems, since its implementation requires a large number of multiplications.It is known that |x^b|_m=|x^|b|_(m)|_m for any x in [1,m−1] if m is prime; in this case the number of multiplications depends on (m) instead of depending on b. It was also stated that previous relation holds in the case m=pq, with p and q prime; this case occurs in the RSA method.In this paper it is proved that such a relation holds in general for any x in [1,m−1] when m is a product of any number n of distinct primes and that it does not hold in the other cases for the whole range [1,m−1].Moreover, a general method is given to compute |x^b|_m without any hypothesis on m, for any x in [1,m−1], with a number of modular multiplications not exceeding those required when m is a product of primes.Next, it is shown that representing x in a residue number system (RNS) with proper moduli m_i allows to compute |x^b|_m by n modular exponentiations |x_i^b|_mi in parallel and, in turn, to replace b by |b|_(mi) in the worst case, thus executing a very low number of multiplications, namely log₂m_i for each residue digit.A general architecture is also proposed and evaluated, as a possible implementation of the proposed method for the modular exponentiation.     

New 9,11-secosterols from gorgonia Subergorgia suberosa of the Indian Ocean

Three new 9,11-secosterols, 3 beta,6 alpha,11-trihydroxy-9,11-seco-5 alpha-cholest-7-ene-9-one (1), 24S- (2a), and 24R-methyl-3 beta,6 alpha, 11-trihydroxy-9,11-seco-5 alpha-cholest-7,22E-diene-9-one (2b), were isolated from the Indian Ocean gorgonia, Subergorgia suberosa. Their structures were established by spectroscopic data.     

Crystallisation of high density polyethylene from dilute solution: Heterogeneous nucleation

The self-seeding crystallisation technique is applied to a dilute solution of polyethylene in xylene containing, in suspension, foreign particles; data concerning some pigments usually employed for colouring the plastics are reported. It is shown that this method allows easy demonstration of the interactions existing between the dissolved polymer and the pigment; at the same time, it is possible to study the morphology which is evolved as a consequence of these interactions under particularly simple conditions as only a small amount of polymer crystallises on the pigment particles. The behaviour of several pigments is consistent with the results obtained by crystallising the bulk polyethylene coloured with the same pigments. Some unusual morphologies are made evident.