Sulfonation of polyetheretherketone by chlorosulfuric acid

Sulfonated poly(oxa-p-phenylene-3,3-phthalido-p-phenylene-oxa-p-phenylene-oxy-phenylene) (PEEK-WC) with various degrees of substitution was obtained by reaction of polyetheretherketone with neat chlorosulfuric acid. Highly sulfonated PEEK-WC was freely soluble in cold water. By working under suitable reaction conditions, no degradation of the polymeric chain was detected. The modified PEEK-WC was able to form asymmetric membranes. The expected chlorosulfonated derivatives were never achieved. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 477–482, 1998     

Formal specification of beliefs in multi-agent systems

The goal of this paper is to present a logical framework for the formalization of agents' mutual beliefs in a Multi Agent system. The approach is based on a combination of extensional specifications of beliefs and context-based (finite) presentation of the specifications by employing a particular class of Multi Context systems. The extensional specification provides a set-theoretic characterization of beliefs in terms of sets closed under certain conditions. Its finite presentation is provided by using as constructors inference rules inside a Multi Context system. The resulting framework allows for capturing many relevant cases of real (not omniscient) agents, which are very common in Multi Agent scenarios embedded in real world environments. In order to substantiate this claim, two Multi Agent scenarios are formally specified in detail in the specification framework. ©1999 John Wiley & Sons, Inc.     

Long-Term Efficacy of Intranasal Esketamine in Treatment-Resistant Major Depression: A Systematic Review

Esketamine (ESK) has been approved as a rapid-acting intranasal treatment for treatment-resistant depression (TRD). Although existing studies have investigated the efficacy of ESK in the 4-week induction phase, our knowledge about long-term ESK efficacy remains poor. The aim of this systematic review was to summarize the available data on long-term ESK efficacy for TRD. A systematic search was performed including articles in English, up to 31 March 2021. The search found 7 relevant studies, involving 1024 adult TRD patients. Continuing treatment with ESK after the 4-week induction phase may be associated with stable efficacy in relapse prevention among TRD patients. Conversely, the long-term antidepressant effectiveness upon discontinuation of ESK might be limited, although data from three studies had a moderate to high risk of bias. Overall, the results on the effectiveness of this compound in the long term are mixed. According to our findings, ESK treatment should be continued following the induction phase to reach a stable efficacy in relapse prevention, while the long-term antidepressant and anti-suicidal effects of ESK after discontinuation are inconsistent. Currently, the level of proof of ESK efficacy in long-term TRD treatment remains low and more RCTs with larger sample sizes and active comparators are needed.     

Product lifecycle data sharing and visualisation: Web-based approaches

Both product design and manufacturing are intrinsically collaborative processes. From conception and design to project completion and ongoing maintenance, all points in the lifecycle of any product involve the work of fluctuating teams of designers, suppliers and customers. That is why companies are involved in the creation of a distributed design and a manufacturing environment which could provide an effective way to communicate and share information throughout the entire enterprise and the supply chain. At present, the technologies that support such a strategy are based on World Wide Web platforms and follow two different paths. The first one focuses on 2D documentation improvement and introduces 3D interactive information in order to add knowledge to drawings. The second one works directly on 3D models and tries to extend the life of 3D data moving these design information downstream through the entire product lifecycle. Unfortunately the actual lack of a unique 3D Web-based standard has stimulated the growing up of many different proprietary and open source standards and, as a consequence, a production of an incompatible information exchange over the WEB. This paper proposes a structured analysis of Web-based solutions, trying to identify the most critical aspects to promote a unique 3D digital standard model capable of sharing product and manufacturing data more effectively—regardless of geographic boundaries, data structures, processes or computing environment.     

Monitoring of perfluorinated compounds in edible fish from the Mediterranean Sea

Perfluorooctanoic acid (PFOA) and perfluorooctane sulphonate (PFOS) are environmental contaminants belonging to a chemical group known as perfluorinated compounds (PCFs). The United States Environmental Protection Agency (US EPA) considers both compounds to be carcinogenic. The goal of the present study was to evaluate the contamination levels of PFOS and PFOA in edible fish of the Mediterranean Sea. Twenty six fish muscles, 17 fish livers, five series of cephalopods (each composed of ten specimens) and thirteen series of bivalves (each composed of about 50 specimens) were used for the investigation. A fast sample treatment, followed by an LC–ESI–MS/MS method is described for the identification, and quantification of PFOA and PFOS in fish. The method was in-house-validated through the determination of precision, accuracy, specificity, calibration curve, decision limit (CCα), and detection capability (CCβ). The results showed PFOA and PFOS levels in fishes and molluscs lower than those reported for analogue matrices in different geographic areas. Therefore, our biomonitoring results did not show that the Mediterranean Sea had any particularly alarming pollution by PFCs, although it is located in a semi-closed basin with scarce water change. Nonetheless, a worrying element is that a few fish showed extremely high contamination by PFOA and PFOS. This finding needs further clarification in order to assess whether such unusual contamination is linked to “dot-like” pollutant release, which could explain the anomaly.     

Frequency-domain-based strain estimation and high-frame-rate imaging for quasi-static elastography

In freehand elastography, quasi-static tissue compression is applied through the ultrasound probe, and the corresponding axial strain is estimated by calculating the time shift between consecutive echo signals. This calculation typically suffers from a poor signal-to-noise ratio or from the decorrelation between consecutive echoes resulting from an erroneous axial motion impressed by the operator. This paper shows that the quality of elastograms can be improved through the integration of two distinct techniques in the strain estimation procedure. The first technique evaluates the displacement of the tissue by analyzing the phases of the echo signal spectra acquired during compression. The second technique increases the displacement estimation robustness by averaging multiple displacement estimations in a high-frame-rate imaging system, while maintaining the typical elastogram frame-rate. The experimental results, obtained with the Ultrasound Advanced Open Platform (ULA-OP) and a cyst phantom, demonstrate that each of the proposed methods can independently improve the quality of elastograms, and that further improvements are possible through their combination.     

A reconfigurable and programmable FPGA-based system for nonstandard ultrasound methods

The availability of programmable and reconfigurable ultrasound (US) research platforms may have a considerable impact on the advancement of ultrasound systems technology; indeed, they allow novel transmission strategies or challenging processing methods to be tested and experimentally refined. In this paper, the ULtrasound Advanced Open Platform (ULA-OP), recently developed in our University laboratory, is shown to be a flexible tool that can be easily adapted to a wide range of applications. Five nonstandard working modalities are illustrated. Vector Doppler and quasi-static elastography applications emphasize the real-time potential and versatility of the system. Flow-mediated dilation, pulse compression, and high-frame-rate imaging highlight the flexibility of data access at different points in the reception chain. For each modality, the role played by the onboard programmable devices is discussed. Experimental results are reported, indicating the relative performance of the system for each application.     

Solvent additives for tuning the photovoltaic properties of polymer-fullerene solar cells

We use solvent additives as a simple method to tune the photovoltaic performance of poly-3-hexylthiophene (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) bulk heterojuncton solar cells. 1,2-dichlorobenzene (oDCB) was used as the reference solvent; chlorobenzene (CB) and 1,2,3,4-tetrahydronaphthalene (THN) were used as additives to influence film formation. An increase in the short circuit current and the power conversion efficiency of solar cells with blends cast from mixed solvents was observed. Blends prepared with THN, the highest boiling point solvent, resulted in the best device performance, while blends prepared with the pure reference solvent resulted in the lowest photocurrent. In-plane investigations of the morphology using transmission electron microscopy (TEM) revealed improved phase segregation for blends prepared with mixed solvents, and increased crystallinity in the P3HT phase is demonstrated using atomic force microscopy (AFM) coupled with Kelvin probe force microscopy (KPFM). Optical modeling reveals that the increase in the photocurrent is not due to changes in the optical properties of the blends. Electrical characterization reveals that the electron mobilities decrease slightly in blends cast from mixed solvents, corresponding to a decrease in the fill factor and an increase in P3HT crystallinity observed at the surface of the blend. The increase in the photovoltaic performance is discussed in terms of increased charge separation at the donor-acceptor interface due to increased ordering in the P3HT phase induced by the solvent additives.     

Head Reconstruction Method to Balance Flux and Source Terms in Shallow Water Equations

This paper presents the head reconstruction method (HRM), a new technique that can be used within the finite volume framework to make shallow water models well balanced, i.e., to correct the imbalance that exists between flux and source terms in the equation discretization in the case of irregular bathymetry thus providing unphysical solutions. This technique, based on considering, within each computational cell, the total head of the flow (i.e., the sum of the elevation, pressure and kinetic energies per unit weight of the fluid) as an equilibrium variable, enables the preservation of dynamic equilibria under subcritical, transcritical, and supercritical flow conditions. The new technique is applied to the one-dimensional total variation diminishing (TVD) MUSCL-Hancock scheme and the conservation property is then proven mathematically for this scheme under static equilibrium conditions. Furthermore, the effectiveness of the HRM is tested and compared with two other well balancing techniques based on considering the water elevation as an equilibrium variable in various steady flow case studies. In the end the robustness of the HRM is tested in the simulation of dam-break flow over irregular bathymetry.     

Multiexcitonic dual emission in CdSe/CdS tetrapods and nanorods

CdSe/CdS semiconductor nanocrystal heterostructures are currently of high interest for the peculiar electronic structure offering unique optical properties. Here, we show that nanorods and tetrapods made of such material combination enable efficient multiexcitonic emission, when the volume of the nanoparticle is maximized. This condition is fulfilled by tetrapods with an arm length of 55 nm and results in a dual emission with comparable intensities from the CdS arms and CdSe core. The relative intensities of the dual emission, originating from exciton phase-space filling and reduced Auger recombination, can be effectively modulated by the photon fluence of the pump laser. The results, obtained under steady-state detection conditions, highlight the properties of tetrapods as multiexciton dual-color emitters.