Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy

Thermal stability in bulk ultrafine-grained (UFG) 5083 Al that was processed by gas atomization followed by cryomilling, consolidation, and extrusion, and that exhibited an average grain size of 305 nm, was investigated in the temperature range of 473 to 673 K (0.55 to 0.79 T _m , where T _m is the melting temperature of the material) for different annealing times. Appreciable grain growth was observed at temperatures > 573 K, whereas there was limited grain growth at temperatures < 573 K even after long annealing times. The values of the grain growth exponent, n, deduced from the grain growth data were higher than the value of 2 predicted from elementary grain growth theories. The discrepancy was attributed to the operation of strong pinning forces on boundaries during the annealing treatment. An examination of the microstructure of the alloy suggests that the origin of the pinning forces is most likely related to the presence of dispersion particles, which are mostly introduced during cryomilling. Two-grain growth regimes were identified: the low-temperature region (<573 K) and the high-temperature region (>573 K). For temperatures lower than 573 K, the activation energy of 25 ± 5 kJ/mol was determined. It is suggested that this low activation energy represents the energy for the reordering of grain boundaries in the UFG material. For temperatures higher than 573 K, an activation energy of 124 ± 5 kJ/mol was measured. This value of activation energy, 124 ± 5 kJ/mol, lies between that for grain boundary diffusion and lattice diffusion in analogous aluminum polycrystalline systems. The results show that the strength and ductility of bulk UFG 5083 Al, as obtained from tensile tests, correlate well with substructural changes introduced in the alloy by the annealing treatment.     

A new pneumatic bearing dynamometer for power input measurement in stirred tanks

A turntable dynamometer has been constructed for the accurate measurement of power input and mixing applications in bench stirred tank reactors. The main feature of this device is a pneumatic bearing with complementary conical parts. The conical pneumatic bearing permitted to apply eccentric loads without affecting its stability. The static friction torque in the pneumatic bearing was very small, 4 × 10^?4 Nm, and can be neglected in the experimental ranges of measured torques, i.e. from 5 × 10^?3 to 2.21 Nm. In accordance with the instrumentation used, the deviations obtained with the apparatus are less than 10% at low torque readings. At moderate torques, deviations lower than 1% are routinely obtained. Several power input measurements show that the obtained data scatter is lower than 2.5%. The power input response in the turbulent regime is in agreement with dimensional analysis: the power input depends on the cube of the impeller speed. In addition, data obtained with a turbine impeller under ungassed conditions agree with the predictions of a published correlation, which takes into account several geometrical parameters.     

Surface chemistry of tribochemical reactions explored in ultrahigh vacuum conditions

The thermal decomposition of model extreme-pressure lubricant additives on clean iron was studied in ultrahigh vacuum conditions using molecular beam strategies. Methylene chloride and chloroform react to deposit a solid film consisting of FeCl₂ and carbon, and evolve only hydrogen into the gas phase. No gas-phase products and less carbon on the surface are detected in the case of carbon tetrachloride. Dimethyl and diethyl disulfide react on clean iron to deposit a saturated sulfur plus carbon layer at low temperatures (∼600 K) and an iron sulfide film onto a Fe + C underlayer at higher temperatures (∼950 K). Methane is the only gas-phase product when dimethyl disulfide reacts with iron. Ethylene and hydrogen are detected when diethyl disulfide is used.     

Influence of electroosmotic treatment on the hydro-mechanical behaviour of clayey silts: preliminary experimental results

Preliminary results of an investigation focused on the influence of electrokinetic treatment on the mechanical and hydraulic behaviour of clayey soils are presented. The experimental programme aims at providing a contribution to the sustainability of contaminant extraction or containment via electroosmosis. Changes in the hydraulic and mechanical properties of two illitic clayey soils, subjected to a DC electric field, were investigated. Samples of the two soils were subjected to electrokinetic filtration, for different periods of time, and under different constant loads. Afterwards, they were tested under one-dimensional compression to detect changes in stiffness and hydraulic conductivity due to the electrical treatment. After the application of a DC field for a few hours, a small reversible increment in the average soil stiffness was observed, with respect to the untreated soil, while the hydraulic conductivity was not affected substantially. Dramatic changes of the mechanical and hydraulic soil properties, correlated to changes of the soil pH, were observed following non-conditioned electrokinetic treatment with duration of the order of days.     

Improving Neural Networks for Mechanism Kinematic Chain Isomorphism Identification

Detection of isomorphism among kinematic chains is essential in mechanical design, but difficult and computationally expensive. It has been shown that both traditional methods and previously presented neural networks still have a lot to be desired in aspects such as simplifying procedure of identification and adapting automatic computation. Therefore, a new algorithm based on a competitive Hopfield network is developed for automatic computation in the kinematic chain isomorphism problem. The neural approach provides directly interpretable solutions and does not demand tuning of parameters. We have tested the algorithm by solving problems reported in the recent mechanical literature. Simulation results show the effectiveness of the network that rapidly identifies isomorphic kinematic chains.     

Enhanced antibody response in Venezuelan infants immunized with Haemophilus influenzae type b-tetanus toxoid conjugate vaccine

The safety and immunogenicity of primary immunization at 2, 4 and 6 months of age with Haemophilus influenzae type b capsular polysaccharide conjugated to tetanus toxoid (PRP-T; Act-HIB) were evaluated in infants in Valencia, Venezuela. In order better to assess reactions to PRP-T, subjects received their initial PRP-T vaccine a mean of 6.5 days after their initial diphtheria-tetanus-pertussis (DTP) vaccine. The PRP-T vaccine was well tolerated. Serum was obtained at ages 2 and 7 months (before the first and 1 month after the third PRP-T dose). Antibody responses were compared with those from Nashville infants who had received PRP-T and DTP simultaneously in a previous trial. The preimmunization titers in the Venezuelan and Nashville infants did not differ. The geometric mean postimmunization titer in the Venezuelan infants was 37.9 micrograms/ml, as compared with 3.63 micrograms/ml in the Nashville infants (P < 0.00001). Possible explanations for the exceptional antibody response of these Venezuelan infants to PRP-T include carrier priming caused by prior DTP immunization, synergy associated with the specific DTP vaccine used, preimmunization immunologic experience that differed from their United States counterparts and genetic differences that altered response to the vaccines. Further studies are proposed to evaluate these possibilities.     

Carbonitriding of Clay: Relation between the Weight Loss and Crystalline Phases during Reaction

β'-Sialons are phases of the Si-Al-O-N system. The carbonitriding of clays and kaolins is a preparation method. The reaction mechanism of clay carbonitriding is verified by means of the relation among crystalline phases formed and the weight loss produced in the samples during the reaction. Two clays were previously mixed with carbon black and pressed into pellets, flowing through N₂ atmosphere, at five temperatures within the range 1335–1427°C. The phases formed (XRD)—mullite, SiC, β'A-sialon, and oxynitrides—were related to the weight loss measured in the pellet independently of reaction temperature and time. The β'A-sialon and the nitrogenous phases were formed from SiC and mullite. A z value decrease for β'A-sialon was observed during reaction progression.     

Comparisons of Urban Travel Forecasts Prepared with the Sequential Procedure and a Combined Model

Detailed analyses and comparisons of urban travel forecasts prepared by applying the state-of-practice sequential procedure and the solution of a combined network equilibrium model are presented. The sequential procedure for solving the trip distribution, mode choice and assignment problems with feedback is the current practice in most transportation planning agencies, although its important limitations are well known. The solution of a combined model, in contrast, results from a single mathematical formulation, which ensures a well-converged and consistent result. Using a real network, several methods for solving the sequential procedure with feedback are compared to the solution of the combined model ESTRAUS. The results of these methods are shown to have various levels of instability. The paper concludes with a call for a new paradigm of travel forecasting practice based on an internally consistent model formulation that can be solved to a level of precision suitable for comparing alternative scenarios.