Innovation assessment in traditional industries. A proposal of aesthetic innovation indicators

Innovative activities are fundamental to the competitiveness strategies of the firms in a globalized market. Their assessment, using indicators such as those utilized in the Community Innovation Survey (CIS), shows significant sectoral dispersion. Traditional industries are in a weak position because the innovation they are involved in is mainly aesthetic, which is not really addressed in innovation surveys. In this work, we review the various criticisms levelled at existing indicators and propose some new indicators that would capture the types of innovations that are conducted by the traditional industries. This work is based on a study of the features of traditional industries and the concept of aesthetic novelty. The proposed indicators are tested in the Spanish footwear industry.     

Thermal stability in bulk cryomilled ultrafine-grained 5083 Al alloy

Thermal stability in bulk ultrafine-grained (UFG) 5083 Al that was processed by gas atomization followed by cryomilling, consolidation, and extrusion, and that exhibited an average grain size of 305 nm, was investigated in the temperature range of 473 to 673 K (0.55 to 0.79 T _m , where T _m is the melting temperature of the material) for different annealing times. Appreciable grain growth was observed at temperatures > 573 K, whereas there was limited grain growth at temperatures < 573 K even after long annealing times. The values of the grain growth exponent, n, deduced from the grain growth data were higher than the value of 2 predicted from elementary grain growth theories. The discrepancy was attributed to the operation of strong pinning forces on boundaries during the annealing treatment. An examination of the microstructure of the alloy suggests that the origin of the pinning forces is most likely related to the presence of dispersion particles, which are mostly introduced during cryomilling. Two-grain growth regimes were identified: the low-temperature region (<573 K) and the high-temperature region (>573 K). For temperatures lower than 573 K, the activation energy of 25 ± 5 kJ/mol was determined. It is suggested that this low activation energy represents the energy for the reordering of grain boundaries in the UFG material. For temperatures higher than 573 K, an activation energy of 124 ± 5 kJ/mol was measured. This value of activation energy, 124 ± 5 kJ/mol, lies between that for grain boundary diffusion and lattice diffusion in analogous aluminum polycrystalline systems. The results show that the strength and ductility of bulk UFG 5083 Al, as obtained from tensile tests, correlate well with substructural changes introduced in the alloy by the annealing treatment.     

A new pneumatic bearing dynamometer for power input measurement in stirred tanks

A turntable dynamometer has been constructed for the accurate measurement of power input and mixing applications in bench stirred tank reactors. The main feature of this device is a pneumatic bearing with complementary conical parts. The conical pneumatic bearing permitted to apply eccentric loads without affecting its stability. The static friction torque in the pneumatic bearing was very small, 4 × 10^?4 Nm, and can be neglected in the experimental ranges of measured torques, i.e. from 5 × 10^?3 to 2.21 Nm. In accordance with the instrumentation used, the deviations obtained with the apparatus are less than 10% at low torque readings. At moderate torques, deviations lower than 1% are routinely obtained. Several power input measurements show that the obtained data scatter is lower than 2.5%. The power input response in the turbulent regime is in agreement with dimensional analysis: the power input depends on the cube of the impeller speed. In addition, data obtained with a turbine impeller under ungassed conditions agree with the predictions of a published correlation, which takes into account several geometrical parameters.     

Influence of electroosmotic treatment on the hydro-mechanical behaviour of clayey silts: preliminary experimental results

Preliminary results of an investigation focused on the influence of electrokinetic treatment on the mechanical and hydraulic behaviour of clayey soils are presented. The experimental programme aims at providing a contribution to the sustainability of contaminant extraction or containment via electroosmosis. Changes in the hydraulic and mechanical properties of two illitic clayey soils, subjected to a DC electric field, were investigated. Samples of the two soils were subjected to electrokinetic filtration, for different periods of time, and under different constant loads. Afterwards, they were tested under one-dimensional compression to detect changes in stiffness and hydraulic conductivity due to the electrical treatment. After the application of a DC field for a few hours, a small reversible increment in the average soil stiffness was observed, with respect to the untreated soil, while the hydraulic conductivity was not affected substantially. Dramatic changes of the mechanical and hydraulic soil properties, correlated to changes of the soil pH, were observed following non-conditioned electrokinetic treatment with duration of the order of days.     

Improving Neural Networks for Mechanism Kinematic Chain Isomorphism Identification

Detection of isomorphism among kinematic chains is essential in mechanical design, but difficult and computationally expensive. It has been shown that both traditional methods and previously presented neural networks still have a lot to be desired in aspects such as simplifying procedure of identification and adapting automatic computation. Therefore, a new algorithm based on a competitive Hopfield network is developed for automatic computation in the kinematic chain isomorphism problem. The neural approach provides directly interpretable solutions and does not demand tuning of parameters. We have tested the algorithm by solving problems reported in the recent mechanical literature. Simulation results show the effectiveness of the network that rapidly identifies isomorphic kinematic chains.     

Carbonitriding of Clay: Relation between the Weight Loss and Crystalline Phases during Reaction

β'-Sialons are phases of the Si-Al-O-N system. The carbonitriding of clays and kaolins is a preparation method. The reaction mechanism of clay carbonitriding is verified by means of the relation among crystalline phases formed and the weight loss produced in the samples during the reaction. Two clays were previously mixed with carbon black and pressed into pellets, flowing through N₂ atmosphere, at five temperatures within the range 1335–1427°C. The phases formed (XRD)—mullite, SiC, β'A-sialon, and oxynitrides—were related to the weight loss measured in the pellet independently of reaction temperature and time. The β'A-sialon and the nitrogenous phases were formed from SiC and mullite. A z value decrease for β'A-sialon was observed during reaction progression.     

A Tale of Two Dams: The Impact of Reservoir Management on Rural Depopulation in Central Spain

In rural areas, depopulation is mainly due to a lack of economic and employment opportunities. In this context, the reservoirs already built can be a source of socioeconomic development based on tourism and outdoor leisure activities. The condition for this development to materialize is that reservoir management considers these activities. In Central Spain, a process of rural depopulation has been generated in the municipalities around the reservoirs at the Upper Tagus River, as water management allows water transfers from the Tagus to the Segura River without taking into account regulations that prioritize and protect donor basin users. Through the comparison of reservoir water management and demographic data of two rural areas close to the reservoirs, this article reveals the direct relationship between reservoir management that enables recreational uses with its consequent socioeconomic development and the maintenance of the population in the territory. Consequently, reservoir water management based on the socioeconomic development of reservoir banks is necessary and a priority over transfers to another basin.

     

Retraction of “Using ergonomic digital human modeling in evaluation of workplace design and prevention of workrelated musculoskeletal disorders onboard small fishing vessel”

The following article from Human Factors and Ergonomics in Manufacturing & Service Industries, “Using ergonomic digital human modeling in evaluation of workplace design and prevention of workrelated musculoskeletal disorders onboard small fishing vessel,” by Enrique Álvarez‐Casado, Bing Zhang, Sonia Tello Sandoval and Mondelo Pedro, published online on October 11, 2011 in Wiley Online Library ( www.onlinelibrary.wiley.com ), has been retracted by agreement between the authors, the journal Editors‐in‐Chief, Waldemar Karwowski and Gavriel Salvendy, and Publisher Wiley Periodicals, Inc. The retraction has been agreed as these articles were mistakenly published after being rejected.     

Solving differential equations with Fourier series and Evolution Strategies

A novel mesh-free approach for solving differential equations based on Evolution Strategies (ESs) is presented. Any structure is assumed in the equations making the process general and suitable for linear and nonlinear ordinary and partial differential equations (ODEs and PDEs), as well as systems of ordinary differential equations (SODEs). Candidate solutions are expressed as partial sums of Fourier series. Taking advantage of the decreasing absolute value of the harmonic coefficients with the harmonic order, several ES steps are performed. Harmonic coefficients are taken into account one by one starting with the lower order ones. Experimental results are reported on several problems extracted from the literature to illustrate the potential of the proposed approach. Two cases (an initial value problem and a boundary condition problem) have been solved using numerical methods and a quantitative comparative is performed. In terms of accuracy and storing requirements the proposed approach outperforms the numerical algorithm.