Morphological evaluation of bioartificial hydrogels as potential tissue engineering scaffolds

Poly(vinyl alcohol) hydrogels prepared by freeze-thawing procedure represent synthetic systems widely investigated as non-biodegradable scaffolds for tissue regeneration. In order to improve the biocompatibility properties of pure poly(vinyl alcohol) (PVA) hydrogels, blends of PVA with different biological macromolecules, such hyaluronic acid, dextran, and gelatin were prepared and used to produce bioartificial hydrogels. The porosity characteristics of these hydrogels were investigated by scanning electron microscopy and mercury intrusion porosimetry. The morphology of bioartificial hydrogels was evaluated and compared with that of pure PVA hydrogels. In particular the effect exerted by each biological component on pore size and distribution was investigated. The obtained results indicate that when a natural macromolecule is added to PVA the internal structure of the material changes. A small amount of biopolymer induces the structural elements of PVA matrix to take on a well evident lamellar appearance and an apparent preferential orientation. Comparing the results of SEM and mercury intrusion porosimetry it was concluded that hydrogels containing 20% of biological component have the most regular structure and at the same time the lowest total porosity. On the contrary samples with the highest content of natural polymer (40%) show the less regular structure and the highest total porosity.     

In vivo synchrotron study of thallium speciation and compartmentation in Iberis intermedia

Thallium (TI) is a metal of great toxicological concern and its prevalence in the natural environment has steadily increased as a result of manufacturing and combustion practices. Due to its low natural abundance and increasing demand, TI is the fourth most expensive metal, thus, recovery and reuse could be a profitable endeavor. The hyperaccumulator Iberis intermedia was examined via in vivo micro-X-ray absorption near edge (micro-XANES) and micro-X-ray fluorescence (micro-XRF) spectroscopies to determine the speciation and distribution of TI within leaves of the plant. I. intermedia plants were cultivated under controlled conditions in 0, 10, and 20 mg TI kg(-1) soil leading to a shoot concentration of up to 13 430 mg TI kg(-1) dry weight plant mass during 10 weeks of growth. Live plant leaves were examined by micro-XANES and micro-XRF which determined aqueous TI(I) to be the model species distributed primarily throughout the vascular network. A direct relationship of vein size to TI concentration was observed. The high uptake of TI and high potential biomass of I. intermedia, combined with knowledge of TI speciation and compartmentation within the plant, are discussed in terms of accumulation/tolerance mechanisms, consequences for potential food chain contamination, and phytomining strategies to reclaim TI-contaminated soils, sediments, and waters.     

Writing and Functionalisation of Suspended DNA Nanowires on Superhydrophobic Pillar Arrays

Nanowire arrays and networks with precisely controlled patterns are very interesting for innovative device concepts in mesoscopic physics. In particular, DNA templates have proven to be versatile for the fabrication of complex structures that obtained functionality via combinations with other materials, for example by functionalisation with molecules or nanoparticles, or by coating with metals. Here, the controlled motion of the a three‐phase contact line (TCL) of DNA‐loaded drops on superhydrophobic substrates is used to fabricate suspended nanowire arrays. In particular, the deposition of DNA wires is imaged in situ, and different patterns are obtained on hexagonal pillar arrays by controlling the TCL velocity and direction. Robust conductive wires and networks are achieved by coating the wires with a thin layer of gold, and as proof of concept conductivity measurements are performed on single suspended wires. The plastic material of the superhydrophobic pillars ensures electrical isolation from the substrate. The more general versatility of these suspended nanowire networks as functional templates is outlined by fabricating hybrid organic–metal–semiconductor nanowires by growing ZnO nanocrystals onto the metal‐coated nanowires.     

The EuQoS system: a solution for QoS routing in heterogeneous networks [Quality of Service based Routing Algorithms for Heterogeneous Networks]

EuQoS is the acronym for "end-to-end quality of service support over heterogeneous networks", which is a European research project aimed at building an entire QoS framework, addressing all the relevant network layers, protocols, and technologies. This framework, which includes the most common access networks (xDSL, UMTS, WiFi, and LAN) is being prototyped and tested in a multidomain scenario throughout Europe, composing what we call the EuQoS system. In this article we present the novel QoS routing mechanisms that are being developed and evaluated in the framework of this project. The preliminary performance results validate the design choices of the EuQoS system, and confirm the potential impact this project is likely to have in the near future     

Numerical Analysis of Coaxial Double Gate Schottky Barrier Carbon Nanotube Field Effect Transistors

Carbon nanotube field-effect transistors (CNTFETs) have been studied in recent years as a potential alternative to CMOS devices, because of the capability of ballistic transport. The ambipolar behavior of Schottky barrier CNTFETs limits the performance of these devices. A double gate design is proposed to suppress this behavior. In this structure the first gate located near the source contact controls carrier injection and the second gate located near the drain contact suppresses parasitic carrier injection. To avoid the ambipolar behavior it is necessary that the voltage of the second gate is higher or at least equal to the drain voltage. The behavior of these devices has been studied by solving the coupled Schrödinger-Poisson equation system. We investigated the effect of the second gate voltage on the performance of the device and finally the advantages and disadvantages of these options are discussed.     

Predicting the damage development in epoxy resins using an anisotropic damage model

For fiber-reinforced plastics, the strain-rate dependent response is governed by the matrix behavior. In this work, the Goldberg model is considered for the epoxy matrix constitutive material model. Moreover, the strain-rate dependency is achieved by direct influence on the elastic modulus, the inelastic strain, and the material strain to failure. In addition, an anisotropic damage response is implemented and extended through a strain-rate dependent definition. Since the constitutive model relies on nonphysical parameters, a parameter study is further performed. Additional numerical investigations using a micro-mechanical model are performed. Tension and shear loading conditions are evaluated and the influence of different strain rates is explored. Furthermore, the implemented anisotropic damage model is compared and discussed against an isotropic damage model.     

Strain sensing fabric for hand posture and gesture monitoring.

In this paper, we report on a new technology used to implement strain sensors to be integrated in usual garments. A particular conductive mixture based on commercial products is realized and directly spread over a piece of fabric, which shows, after the treatment, piezoresistive properties, i.e., a change in resistance when it is strained. This property is exploited to realize sensorized garments such as gloves, leotards, and seat covers capable of reconstructing and monitoring body shape, posture, and gesture. In general, this technology is a good candidate for adherent wearable systems with excellent mechanical coupling with body surface. Here, we mainly focused on a sensorized glove able to detect posture and movements of the fingers. It could be used in several fields of application. We report on experimental results of a sensorized glove used as movements recorder for rehabilitation therapies and medicine. Furthermore, we describe a dedicated methodology used to read the output sensors which allowed to avoid using metallic wires for the connections. The price to be paid for all these advantages is a nonlinear electric response of the fabric sensor and a too long settling time, that in principle, make these sensors not suitable for real-time applications. Here we propose a hardware and computational solution to overcome this limitation.     

Mixed convection with variable viscosity in a vertical annulus with uniform wall temperatures

The steady and laminar mixed convection with a temperature-dependent viscosity in a vertical annular duct with uniform wall temperatures is studied analytically. The flow is considered as purely axial and the fluid density is assumed to be a linear function of temperature. Analytical expressions of the dimensionless velocity distribution, of the dimensionless pressure drop and of the Fanning friction factors are determined. The importance of choosing the mean fluid temperature as the reference temperature in the definition of the difference between the pressure and the hydrostatic pressure is pointed out. The results show that the combined effects of buoyancy forces and of a variable fluid viscosity on the cross-section-averaged Fanning friction factor may be important, and that negative values of this quantity may occur.     

Isotopic Effect on the Kinetics of the Belousov-Zhabotinsky Reaction

In this work we present results about the deuterium isotope effect on the global kinetics of a Belousov-Zhabotinsky reaction in batch conditions. A nonlinear dependence of the Induction Period upon the percentage of deuterated reactants was found. The isotopic effect on the bromination reaction of malonic acid was evaluated.