Mixing and solid-liquid mass-transfer rates in a creusot-loire uddeholm vessel: A water model case study

The process of mixing and solid-liquid mass transfer in a one-fifth scale water model of a 100-ton Creusot-Loire Uddeholm (CLU) converter was investigated. The modified Froude number was used to relate gas flow rates between the model and its protoype. The influences of gas flow rate between 0.010 and 0.018 m³/s and bath height from 0.50 to 0.70 m on mixing time were examined. The results indicated that mixing time decreased with increasing gas flow rate and increased with increasing bath height. The mixing time results were evaluated in terms of specific energy input and the following correlation was proposed for estimating mixing times in the model CLU converter: T _mix=1.08Q ^−1.05 W ^0.35, where Q (m³/s) is the gas flow rate and W (tons) is the model bath weight. Solid-liquid mass-transfer rates from benzoic acid specimens immersed in the gas-agitated liquid phase were assessed by a weight loss measurement technique. The calculated mass-transfer coefficients were highest at the bath surface reaching a value of 6.40 × 10⁻⁵ m/s in the sprout region. Mass-transfer coefficients and turbulence parameters decreased with depth, reaching minimum values at the bottom of the vessel.     

Learning-based dynamic coupling of discrete and continuous trackers

We present a data-driven dynamic coupling between discrete and continuous methods for tracking objects of high dofs, which overcomes the limitations of previous techniques. In our approach, two trackers work in parallel, and the coupling between them is based on the tracking error. We use a model-based continuous method to achieve accurate results and, in cases of failure, we re-initialize the model using our discrete tracker. This method maintains the accuracy of a more tightly coupled system, while increasing its efficiency. At any given frame, our discrete tracker uses the current and several previous frames to search into a database for the best matching solution. For improved robustness, object configuration sequences, rather than single configurations, are stored in the database. We apply our framework to the problem of 3D hand tracking from image sequences and the discrimination between fingerspelling and continuous signs in American Sign Language.     

The impact of team and work characteristics on team functioning

In this article, the authors seek to strengthen the theoretical foundation of team and cell formation through the inclusion of human factors. They distinguish three types of team characteristics: global, shared, and compositional attributes. In this last category, they also deal with diversity in teams by addressing three types of variables: demographic characteristics, skills and knowledge, and personality traits. In addition, the authors address the relevance of the structure of diversity in cells. For each of the above‐mentioned groups of team characteristics, their potential impact on team functioning is worked out and discussed with simultaneous consideration of the characteristics of the team task. Three industrial examples are included to illustrate the importance of including worker, team, and work characteristics when designing manufacturing cells. © 2006 Wiley Periodicals, Inc. Hum Factors Man 16: 1–15, 2006.     

Tobacco craving predicts lapse to smoking among adolescent smokers in cessation treatment.

Previous research indicates that tobacco craving predicts relapse to smoking among adult smokers attempting to quit. We hypothesized a similar relationship between craving and lapse (any smoking following a period of abstinence) among adolescent smokers during the treatment phase of a clinical trial. A visit was considered a lapse visit if the participant reported smoking or had a carbon monoxide level of 7 ppm or greater subsequent to an abstinent visit. A total of 34 participants (mean age = 14.9 years [SD = 1.3]; mean cigarettes/day = 18.0 [SD = 7.6]; mean Fagerstr?m Test for Nicotine Dependence score = 6.8 [SD = 1.34]; 65% female), were included in the present analysis of 167 treatment visits. Logistic regression analyses showed a positive relationship between degree of craving, measured by the Questionnaire on Smoking Urges, and lapse during smoking cessation treatment (p = .013). Additionally, linear regression analyses demonstrated a strong positive association between cigarettes smoked per day and craving scores (p<.001). Taken together with other data, these findings suggest that degree of craving might influence tobacco abstinence for adolescent smokers. Thus monitoring and addressing craving appears useful to increase the success of adolescent smoking cessation.     

Indoor temperature changes in retrofit homes

The behavioral response (e.g. changes in indoor temperatures, attention to window and door openings) to residential technical efficiency improvements (e.g. attic insulation, storm windows) is an important and largely unresolved issue. Although there is considerable discussion concerning the extent to which households take back some of the energy savings due to technical efficiency improvements in increased comfort, there is almost no empirical evidence on the subject.Detailed electricity billing data (from mid-1981 to mid-1983) were analyzed for 79 households that received financial assistance from the Bonneville Power Administration to retrofit their homes in mid-1982. The mean retrofit expenditure in these homes was $1900; the mean reduction in annual electricity use was 4700 kWh, of which 83% was due to reductions in space heating electricity use. Analysis of the electricity billing data suggests that these households increased their indoor temperature settings after retrofit by almost 1 °F on average. This temperature increase led to an estimated average loss of almost 600 kWh of electricity saving. In other words, roughly 10% of the energy saving due to retrofit was taken back in terms of increased comfort. These results concerning changes in indoor temperatures should be viewed cautiously because of limitations in the analytical method and the large variation across households.     

A comparison of commonly used hydrologic design methods for rainwater collectors

Rainwater collection as a possible water source in developing countries is introduced. The major parameters in calculating the size of the tank are defined. Six methods that have been used previously to relate demand, storage, reliability and the rainfall pattern are compared to the Ottawa Model over a wide range of demands.     

Thermogravimetric Determination of Carbon, Nitrogen, and Oxygen in Aluminum Nitride

A thermogravimetric method for the measurement of carbon, nitrogen, and oxygen in aluminum nitride is described. Since carbon oxidation occurs at lower temperatures than the oxidation of the aluminum compounds, thermogravimetric analyses in the respective temperature regimes can yield measurement of the oxygen, nitrogen, and carbon content. Thermogravimetric analyses were performed on mixtures of aluminum nitride and carbon with various concentrations in order to evaluate the accuracy of this method. The results were compared with those obtained by the hot gas extraction method. Errors produced by overlapping of the temperature ranges of the reactions were evaluated and experimental conditions were optimized to minimize error. This method can produce reliable results at elemental concentrations higher than a few percent. The absolute errors of the C/AI, N/Al, and O/Al atomic ratios were less then 0.02. The detection limit was evaluated to 0.2 wt% of each element. The applicability of the method to the study of the kinetics of the nitridation reaction was demonstrated.     

The impact of presentation graphics on students’ experience in the classroom

To investigate the benefits and perceived effectiveness of instructional technology, students enrolled in several courses were compared on student evaluations of instruction, grades and an attitudinal questionnaire. The instructors of the courses taught the same course across two successive semesters, using traditional “chalk-and-talk” methods the first semester, and PowerPoint the next; all other techniques (e.g., exams, lecture material) were held constant. Results suggest that organization and clarity, entertainment and interest, professor likeability, and good professor behaviors were enhanced with PowerPoint although final grades were not.     

Physical degradation of genomic DNA of soybean flours does not impair relative quantification of its transgenic content

In this paper, four different physical treatments (microwaves, heating by conduction, sonication and pressure autoclaving) were performed to degrade a pure DNA extract, and their influence on GMO quantification was studied. The aim was to check the hypothesis that processing of agrofood products results in a similar degradation rate for both the transgenic target and the specific target. Indeed we could observe that even if the used physical treatments could lead to a significant increase of C _t values for both transgenic and specific targets, the resulting ΔC _t remained stable. So, the main conclusion of the study is that the aforementioned hypothesis seems valid and thus a physical degradation of DNA will not affect the relative quantitation of the GMO content, provided that both the specific and transgenic targets have very similar size. A second important issue of the experiments performed was that DNA is a very robust molecule as it is extremely difficult to reach a mean size below 100 bp. The study also gives evidence of the importance of using small targets.