DC conductivity study of polyaniline and poly(acrylonitrile-butadiene-styrene) blends

In this study, conducting blends of poly(acrylonitrile-butadiene-styrene) and polyaniline doped with dodecylbenzene sulfonic acid were prepared by solution blending. In order to understand the electrical conduction mechanism of the samples, DC electrical conductivity measurements of the blends were carried out in the temperature range of 80–320 K. The experimental results fit well with Mott's model of three-dimensional variable range hopping conduction. The values of Mott's temperature, density of states at the Fermi energy, average hopping distance and barrier height for the composites were calculated and presented.     

The local spatial autocorrelation and the kernel method for identifying black zones: A comparative approach

This article aims to determine the location and the length of road sections characterized by a concentration of accidents (black zones). Two methods are compared: one based on a local decomposition of a global autocorrelation index, the other on kernel estimation. After explanation, both methods are applied and compared in terms of operational results, respective advantages and shortcomings, as well as underlying conceptual elements. The operationality of both methods is illustrated by an application to one Belgian road.     

A pseudo-neural system for hypothesis selection

The article describes a system for hypothesis elicitation and ranking formed by a net of computational elements obtained by modifying the classical neural model of Caianiello. This neural structure was chosen on the basis both of knowledge representation and of parallel processing considerations. the two fundamental components of the system are an elaboration layer and, in case the available evidences are insufficient to trigger explanatory hypotheses, a query layer that enables the system to gather additional information. Algorithms that help setting the crucial variable parameters of the net are described in the Appendix. © 1992 John Wiley & Sons, Inc.     

Characteristics of Hydroxamic Acid Induction in Wheat Triggered by Aphid Infestation

Hydroxamic acids (Hx) are natural products of Gramineae that are associated with cereal resistance to pests. We aimed at characterizing the induction of Hx accumulation in seedlings of wheat,Triticum aestivum, by short-term infestation of the cereal aphid,Rhopalosiphum padi. A load of 25 aphids increased significantly the Hx levels in the infested primary leaf in comparison with control levels. Lower loads did not increase Hx concentration. Aphid infestation lasting 16 hr did not elicit induction of Hx, even after a time-lag of 32 hr to allow the expression of any induced response. Forty-eight hours was the minimum duration of aphid infestation required to trigger Hx induction. The age of the infested tissue (the primary leaf) did not affect induction. Similar increases of Hx were found in unfolding, expanding, and totally expanded primary leaves. It was determined that the regime of nutrient supply (N-intensive nutritive solutions at low and high concentration) to wheat seedlings had no effect on the magnitude of the aphid-induced Hx (N-based secondary metabolites). Results obtained are discussed in the framework of general theories of plant defense allocation.     

Thermal and viscoelastic behaviour of copolymers of propene and 1-hexene

Summary The thermal and viscoelastic behaviour of several copolymers of propene and 1-hexene have been studied in a wide range of compositions. The samples were prepared with a Ziegler-Natta catalyst with both internal and external donors. A significant amount of crystallinity has been found for the sample with a comonomer content as high as 19 mol %. The dynamic mechanical results show a considerable decrease of the storage modulus in the copolymers in relation to that of iPP. A single relaxation, corresponding to the glass transition, has been found in all the samples. Only the copolymer with the highest hexene content seems to display the beginning of another relaxation at low temperature.     

Dynamic Contextual Adaptation

When developing systems based on COTS, components need to be adapted in most of the occasions to work under certain conditions which were not initially predicted by their developers. Thus, it is very important to provide systems with the skill to dynamically alter their behaviour while running, depending on the changing conditions of the environment. In this work we describe a context-dependent, dynamic mapping between the interfaces of the components being adapted, overcoming some of the limitations of the static mappings presented in previous works. This is achieved by means of contextual environments, which define flexible adaptation policies. We also present a case study, illustrating the proposal, and discuss the improvements these mappings represent in comparison with previous works, as well as some open issues.     

Electrocatalysis of methanol,ethanol and formic acid using a Ru/Pt metallic bilayer

This work describes the methanol, ethanol and formic acid oxidation using a metallic bilayer electrodeposited on a platinum substrate. Firstly, one monolayer of ruthenium was deposited on the substrate and over it a 1.1 layer of metallic platinum. In the blank solution it was observed that the electrochemical behavior of both the Pt/Ru/Pt and bulk Pt were very similar, except in the oxygen evolution potential region. Using X-ray photoelectronic spectroscopy (XPS) it was not possible to identify the presence of Ru atoms on the bilayer surface. The electroactive area and the RMS roughness factor measured with atomic force microscopy (AFM) for both materials are the same. A CO monolayer oxidation procedure confirmed that the systems have the same real surface area and also showed a shift in the negative direction for 54 mV on the CO peak potential for the bilayer. For the voltammetric organic molecules oxidation, an enhancement in the current densities of 350, 390 and 420% was observed for ethanol, methanol and formic acid, respectively, for the bilayer system compared to the bulk Pt electrodes. Also, a decrease of 110 mV in the beginning of the ethanol oxidation process was observed over the bilayer system compared to bulk Pt.     

On the reorganization of sensory hand areas after mono-hemispheric lesion: a functional (MEG)/anatomical (MRI) integrative study

The topography of primary sensory cortical hand area following a monohemispheric lesion (sudden = stroke; progressive = neoplasm) was investigated in relationship with clinical recovery of sensorimotor deficits. Twenty seven patients with monohemispheric lesions were studied in a clinically stabilized condition. Functional informations from magnetoencephalography (MEG) were integrated with anatomical data from magnetic resonance imaging (MRI). MEG localizations of the neurons firing at early latencies in primary sensory cortex after separate stimulation of median nerve, thumb and little fingers of each hand were carried out. Characteristics of cerebral equivalent current dipoles (ECDs) activated by each contralateral stimulation, the 'hand extension' (i.e., the distance in millimetres between ECDs of first and fifth digits), as well as interhemispheric differences of the tested parameters were investigated. Finally, ECDs' locations were integrated with MRI. Lesions involving cortical (C) or subcortical (s.c.) areas receiving sensory input from the hand were often combined to increase interhemispheric asymmetry of the tested parameters (22% for C and 49% for s.c. lesions). This might be due to an activation of neuronal districts which in the affected hemisphere (AH) differ from those normally activated in the unaffected hemisphere (UH) and in the control population. Moreover, the 'hand extension' was enlarged on the AH--more frequently after a SC lesion--mainly due to a medial shift of the little finger ECD, combined to a tendency of both finger ECDs to shift frontally. After a C lesion, responses from the AH were often stronger than normal. Spatial reorganizations were also seen in the UH (7% of C and 14% of SC lesions). 'Hand extension' in the UH was selectively enlarged for the P30m only when combined with a similar enlargement in the AH. Significant interhemispheric asymmetries due to neuronal reorganization in the AH were associated with worse clinical outcomes compared to patients without asymmetries.     

Environmental Effects on the Accumulation of Hydroxamic Acids in Wheat Seedlings: The Importance of Plant Growth Rate

The effects of temperature and photoperiod on accumulation of hydroxamic acids (Hx) in wheat (Triticum aestivum L.) seedlings were evaluated under laboratory conditions. Hx concentrations were significantly higher at higher temperatures. No such clear trend was found for the photoperiod effect. The significant effect of temperature and photoperiod on growth rate of seedlings and the significant positive correlation between growth rate prior to analysis and levels of Hx, suggested that environmental effects on Hx accumulation were at least partially mediated through their effect on plant growth rate. After uncoupling the effect of environmental conditions from the effect of plant growth rate by statistical means the effect of temperature on Hx was no longer significant. Therefore, temperature effect was fully mediated by plant growth rate. Implications of the patterns found are discussed in issues of plant-defense general theories.     

Evaluation of Diluted and Undiluted Trickle-Bed Hydrotreating Reactor with Different Catalyst Volume

In this work, a comparative study on the combined effects of hydrodynamics and kinetics on the hydrodesulfurization (HDS) of a straight-run gas oil (SRGO) using a trickle-bed reactor with and without diluent (SiC) and different catalyst volume (0.1, 0.07, and 0.050 × 10^-3 m³, respectively) was carried out. The tests were conducted in a pilot plant under conditions close to those used in industrial-scale units (5492 kPa, 445.4 m³(STP)/m³ H₂/oil ratio, 623-643K, 0.9 and 2.5 h^-1 LHSV values). The catalyst used was a commercial CoMoP/Al₂O₃ formulation shaped as tri-lobed extrudates (1/20 in, nominal size) or as crushed particles (d_p = 1.2 × 10^-3 m). Contrarily to that usually claimed, the undiluted systems showed better performance than those comprising small diluent (SiC) particles (d_p ~ 5 × 10^-5 m). Calculations to evaluate hydrodynamic variables (plug-flow behavior, wall effects, wetting, and back-mixing) were carried out in order to explain the observed facts. The possible influences of the size of the diluent particles used are discussed.