Rosuvastatin Enhances the Catabolism of LDL apoB‐100 in Subjects with Combined Hyperlipidemia in a Dose Dependent Manner

Dose‐associated effects of rosuvastatin on the metabolism of apolipoprotein (apo) B‐100 in triacylglycerol rich lipoprotein (TRL, d < 1.019 g/ml) and low density lipoprotein (LDL) and of apoA‐I in high density lipoprotein (HDL) were assessed in subjects with combined hyperlipidemia. Our primary hypothesis was that maximal dose rosuvastatin would decrease the apoB‐100 production rate (PR), as well as increase apoB‐100 fractional catabolic rate (FCR). Eight subjects received placebo, rosuvastatin 5 mg/day, and rosuvastatin 40 mg/day for 8 weeks each in sequential order. The kinetics of apoB‐100 in TRL and LDL and apoA‐I in HDL were determined at the end of each phase using stable isotope methodology, gas chromatography‐mass spectrometry, and multicompartmental modeling. Rosuvastatin at 5 and 40 mg/day decreased LDL cholesterol by 44 and 54 % (both P < 0.0001), triacylglycerol by 14 % (ns) and 35 % (P < 0.01), apoB by 30 and 36 % (both P < 0.0001), respectively, and had no significant effects on HDL cholesterol or apoA‐I levels. Significant decreases in plasma markers of cholesterol synthesis and increases in cholesterol absorption markers were observed. Rosuvastatin 5 and 40 mg/day increased TRL apoB‐100 FCR by 36 and 46 % (both ns) and LDL apoB‐100 by 63 and 102 % (both P < 0.05), respectively. HDL apoA‐I PR increased with low dose rosuvastatin (12 %, P < 0.05) but not with maximal dose rosuvastatin. Neither rosuvastatin dose altered apoB‐100 PR or HDL apoA‐I FCR. Our data indicate that maximal dose rosuvastatin treatment in subjects with combined hyperlipidemia resulted in significant increases in the catabolism of LDL apoB‐100, with no significant effects on apoB‐100 production or HDL apoA‐I kinetics.     

“Arbequina” Olive Oil Composition Is Affected by the Application of Regulated Deficit Irrigation during Pit Hardening Stage

Three new regulated deficit irrigation (RDI) treatments were applied to “Arbequina” olive orchards during pit hardening. Oil quality was determined by measuring analytical parameters for olive oil grading, antioxidant activity, total phenol content, fatty acid profile, volatile compounds profile, and sensory analysis. Oils from RDI were classified as “extra virgin olive oil” and their quality was improved due to their higher antioxidant potential (ABTS⁺ [increased ~75%] and DPPH^˙ [increased ~25%] assays) and phenols (increased ~53%) than control. Concentration of total volatile compounds decreased (~27%) but RDI olive oils showed a more balanced profile (alcohols, aldehydes, and esters). Monounsaturated fatty acid content increased (~5%) and atherogenic and thrombogenic indexes decreased (~8.5%) in RDI olive oil. Regarding sensory analysis, RDI provided more balanced oils with higher fruit aroma than control. Other benefits of RDI olive oil, when compared with oil from full irrigated orchards are reduced use of water and improved functional and sensory quality.     

Oxidative Stability of Chia (Salvia hispanica L.) and Sesame (Sesamum indicum L.) Oil Blends

Chia and sesame oils are important sources of essential fatty acids; however, their ω-3:ω-6 proportions do not comply with nutritional recommendation. A feasible approach to improve the ratio is to blend different oils, but only after understanding physical and chemical changes of the new matrix. Objective of the investigation was to determine the physico-chemical characteristics and the oxidative stability index (OSI), using the Rancimat method, of chia-sesame oil blends. The four ω-3:ω-6 blends tested (1:4, 1:6, 1:8, and 1:10) were exposed to temperatures of 110, 120, and 130 °C. The OSI values of the mixtures varied between 6.24–8.08, 3.07–4.00, and 1.62–2.01 hours for each temperature, respectively. In addition, their mean activation energy, enthalpy, entropy, and Q₁₀ were 88.4 kJ/mol, 85.2 kJ/mol, −41.1 J/mol K, and 2.0. Finally, a shelf life prediction performed at 25 °C indicated stability times between 80 and 123 days. Therefore, combining chia and sesame oils produced blends with a good balance of essential fatty acids.     

Cytotoxic salan-titanium(IV) complexes: high activity toward a range of sensitive and drug-resistant cell lines, and mechanistic insights

The cytotoxicities of highly efficient salan-Ti(IV) complexes toward a range of cell lines, including drug-resistant cells, are reported along with preliminary mechanistic insights. Five salan-Ti(IV) complexes were investigated toward eight different human and murine cancer-derived cell lines, including colon, ovarian, lung, cervical, pancreatic, leukemic, skin, and breast. The salan complexes are more active toward the cells analyzed than cisplatin and the known titanium compound (bzac)(2) Ti(OiPr)(2) , and no cell line resistant to the salan complexes was identified. Moreover, the salan-Ti(IV) complexes are highly active toward both cisplatin-sensitive (A2780) and cisplatin-resistant (A2780CisR) human ovarian cancer cell lines. Similarly, the salan complexes are cytotoxic toward multi-drug-resistant (ABCB1-expressing) mouse lymphoma cell lines HU-1 and HU-2. Importantly, minimal or no activity was observed toward primary murine cells (bone marrow, heart, liver, kidney, spleen, and lung), supporting selectivity for cancer cells. Additionally, the salan complexes maintain high cytotoxicity for up to 24 h following exposure to cell culture medium, whereas reference complexes (bzac)(2) Ti(OiPr)(2) and Cp(2) TiCl(2) rapidly lose much of their activity upon exposure to medium, within ~1 h. The upregulation of p53 followed by cell-cycle arrest in G(1) phase is likely one mechanism of action of the salan complexes. Taken together, the results indicate that these compounds are selectively toxic to cancer cells and are able to circumvent two independent mechanisms of drug resistance, thus expanding the scope of their potential medicinal utility.     

Kinetic and stoichiometric characterisation of streptavidin-binding aptamers

Aptamers are oligonucleotide ligands that are selected for high-affinity binding to molecular targets. Only limited knowledge relating to relations between structural and kinetic properties that define aptamer-target interactions is available. To this end, streptavidin-binding aptamers were isolated and characterised by distinct analytical techniques. Binding kinetics of five broadly similar aptamers were determined by surface plasmon resonance (SPR); affinities ranged from 35-375 nM with large differences in association and dissociation rates. Native mass spectrometry showed that streptavidin can accommodate up to two aptamer units. In a 3D model of one aptamer, conserved regions are exposed, strongly suggesting that they directly interact with the biotin-binding pockets of streptavidin. Mutational studies confirmed both conserved regions to be crucial for binding. An important result is the observation that the most abundant aptamer in our selections is not the tightest binder, emphasising the importance of having insight into the kinetics of complex formation. To find the tightest binder it might be better to perform fewer selection rounds and to focus on post-selection characterisation, through the use of complementary approaches as described in this study.     

Reversible,repeatable and low phase transition behaviour of spin coated nanostructured vanadium oxide thin films with superior mechanical properties

Smooth, uniform and crystalline vanadium oxide thin films were deposited on quartz by spin coating technique with four different rpm i.e., 1000, 2000, 3000 and 4000 and subsequently post annealed at 350, 450 and 550?°C in vacuum. Transmission electron microscopy (TEM), Field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) techniques were utilized for microstructural characterizations and phase analysis, respectively, for vanadium oxide powder and deposited film. Nanorods were observed to be grown after vacuum annealing. X-ray photoelectron spectroscopy (XPS) technique was utilized to study the elemental oxidation state of deposited vanadium oxide films. Thermo-optical and electrical properties such as solar transmittance (τ_s), reflectance (ρ_s), absorptance (α_s), infrared (IR) emittance (ε_ir) and sheet resistance (R_s) of different thin films were evaluated. Based on the optical characteristics the optimized condition of the film processing was identified to be spin coated at 3000?rpm. Subsequently, the nanoindentation technique was utilized to measure hardness and Young's modulus of the optimized film. The measured nanomechanical properties were found to be superior to those reported for sputtered vanadium oxide films. Finally, temperature dependent phase transition characteristics of optimized vanadium oxide films were studied by differential scanning calorimetry (DSC) technique. Reversible and repeatable phase transition was found to occur in the range of 44–48?°C which was significantly lower than the phase transition temperature (i.e., 68?°C) of bulk VO₂.     

Laser‐induced surface structures on gold‐coated polymers: Influence of morphology on surface‐enhanced Raman scattering enhancement

The fabrication of highly sensitive and reproducible substrates for Surface‐Enhanced Raman Scattering (SERS) remains a challenging scientific and technological issue. In this work, laser‐induced periodic surface structures are generated on poly(trimethylen terephthalate) films upon laser irradiation with the linearly polarized beams of a Nd:YAG laser (4th harmonic, 266 nm), an ArF excimer laser (193 nm), and a Titanium:sapphire laser (795 nm), resulting in periods close to the laser wavelength when irradiating at normal incidence, and larger periods for different angles of incidence. Additional irradiation with a circularly polarized beam at 266 nm produces superficial circular structures. The nanostructured polymers are coated with a nanoparticle assembled gold layer by pulsed laser deposition at 213 nm. The capabilities of these substrates for SERS are evaluated using benzenethiol as a test molecule and different degrees of Raman signal enhancement are observed depending on the nanostructure type. The highest enhancement factor is obtained by for nanostructured substrates with the highest values of period, depth, and roughness. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42770.     

Individual Particle Morphology and Acidity

The morphological characterization of particles during the Pittsburgh Air Quality Study (PAQS) suggests that particle shape and physical state depends on their acidity. The aerosol shape parameters measured by Computer-Controlled Scanning Electron Microscopy (CCSEM) are statistically different in periods when atmospheric particles are neutral and when they are acidic. High concentrations of particles smaller than 500 nm with high sulfur content and liquid appearance or signs of a previous liquid state before partial or total recrystallization are present on filters collected in days with high aerosol acidity. By contrast, in winter and summer periods in which the aerosol was neutral, the shape parameter values are similar and suggest that the particles have been dried out. These direct observations support the hypothesis that during summer acidic periods in the Eastern United States the particles may contain some water even at low relative humidity both in the atmosphere and on filters.     

Single Charging of Nanoparticles by UV Photoionization at High Flow Rates

The feasibility of UV photoionization for single unipolar charging of nanoparticles at flow rates up to 100 l· min ^?1 is demonstrated. The charging level of the aerosol particles can be varied by adjusting the intensity of the UV radiation. The suitability of a UV photocharger followed by a DMA to deliver monodisperse nanoparticles at high aerosol flow rates has been assessed experimentally in comparison to a radioactive bipolar charger ( ⁸⁵ Kr, 10 mCi). Monodisperse aerosols with particle sizes in the range of 5 to 25 nm and number concentrations between 10 ⁴ and 10 ⁵ cm ^?3 have been obtained at flow rates up to 100 l· min ^?1 with the two aerosol chargers. In terms of output particle concentration, the UV photoionizer performs better than the radioactive ionizer with increasing aerosol flow rate. Aerosol charging in the UV photoionizer is described by means of a photoelectric charging model that relies on an empirical parameter and of a diffusion charging model based on the Fuchs theory. The UV photocharger behaved as a quasi-unipolar charger for polydisperse aerosols with particles sizes less than 30 nm and number concentrations ～10 ⁷ cm ^?3 . Much reduced diffusion charging was observed in the experiments, with respect to the calculations, likely due to ion losses onto the walls caused by unsteady electric fields in the irradiation region.