Pulsed laser deposition of silicon nitride thin films by laser ablation of a Si target in low pressure ammonia

We report the deposition of Si-N films by multipulse excimer laser ( = 308 nm, _FWHM = 30 ns) ablation of Si wafers placed in a slow flow of NH₃ in the pressure range (1 bar-1 mbar). The films are deposited on to a Si collector placed parallel to the Si target. We succeeded in depositing pure amorphous Si₃N₄ films at a pressure of 1 mbar of NH₃. The deposition rate reached a maximum value of 0.2–0.3 nm per pulse. At lower pressures, the deposited films consist of a fine mixture of three amorphous phases (amorphous stoichiometric silicon nitride, amorphous non-stoichiometric silicon nitride and amorphous silicon). The amorphous silicon is prevalent in films deposited at a pressure of several to several tens of bars. Droplets of polycrystalline -Si are sometimes visible on the film surface. The experimental evidence, is analysed with a view to elucidating the participation in the chemical synthesis of the three main stages of the process: the substance expulsion from the target by laser ablation, the transition through the gas of the expulsed substance and it's final impact on the collector. We conclude that silicon nitride is mostly synthesized during the impact on the collector of the flow of the ablated substance.     

Robust procedures in multiple regression: P-subsets and a computational proposal

A number of robust and diagnostic techniques for the linear regression are in terms of p-dimensional subsets of the original sample. In a sample of size n this leads to consider ⁿ C _p subsets. To reduce the computational burden, a limited number of subsets can be selected by means of a sub-sampling scheme. In this paper we suggest and discuss the use of a Balanced Incomplete Block design plan.     

Minimum‐variance control of astronomical adaptive optic systems with actuator dynamics under synchronous and asynchronous sampling

Adaptive optic (AO) systems are now routinely used in ground‐based telescopes to counter the effects of atmospheric turbulence. A deformable mirror (DM) generates a correction wavefront, which is subtracted from the turbulent wavefront using measurements of the residual phase provided by a wavefront sensor (WFS). Minimizing the variance of the residual phase defines a sampled data control problem combining a continuous time minimum‐variance (MV) performance criterion with a discrete‐time controller. For a fairly general class of linear time‐invariant DM and turbulence WFS models, this control problem can be transformed into an equivalent discrete‐time LQ optimization problem involving a set of (discrete‐time) control‐sufficient statistics of the incoming continuous‐time turbulence. This paper shows how to constructively solve this MV problem in the presence of DM's dynamics, starting from continuous‐time models of DM and turbulence. This result is extended to the case of asynchronous DM/WFS sampling. An illustrative application to optimal control of tip‐tilt turbulent modes for the European extremely large telescope in the presence of first‐order DM's dynamics is presented. Copyright © 2010 John Wiley & Sons, Ltd.     

ISS feedback control redesign for continuous stirred tank reactors

In this paper a new nonlinear feedback control law for continuous stirred tank reactors, obtained by exact Input/Output (I/O) linearization and Sontag's input‐to‐state stability feedback control redesign methods, is studied. By the new feedback control law, a significant attenuation of the disturbance effect is guaranteed, with evident improvement with respect to control laws obtained by the exact I/O linearization method. The performed simulations validate the theoretical results. Copyright © 2010 John Wiley & Sons, Ltd.     

Parameter estimation and stabilization for a wave equation with boundary output harmonic disturbance and non‐collocated control

This paper is concerned with the parameter estimation and stabilization of a one‐dimensional wave equation with harmonic disturbance suffered by boundary observation at one end and the non‐collocated control at the other end. An adaptive observer is designed in terms of measured velocity corrupted by harmonic disturbance with unknown magnitude. The backstepping method for infinite‐dimensional system is adopted in the design of the feedback law. It is shown that the resulting closed‐loop system is asymptotically stable. Meanwhile, the estimated parameter is shown to be convergent to the unknown parameter as time goes to infinity. Copyright © 2010 John Wiley & Sons, Ltd.     

Adaptive NN output‐feedback decentralized stabilization for a class of large‐scale stochastic nonlinear strict‐feedback systems

In this paper, the decentralized adaptive neural network (NN) output‐feedback stabilization problem is investigated for a class of large‐scale stochastic nonlinear strict‐feedback systems, which interact through their outputs. The nonlinear interconnections are assumed to be bounded by some unknown nonlinear functions of the system outputs. In each subsystem, only a NN is employed to compensate for all unknown upper bounding functions, which depend on its own output. Therefore, the controller design for each subsystem only need its own information and is more simplified than the existing results. It is shown that, based on the backstepping method and the technique of nonlinear observer design, the whole closed‐loop system can be proved to be stable in probability by constructing an overall state‐quartic and parameter‐quadratic Lyapunov function. The simulation results demonstrate the effectiveness of the proposed control scheme. Copyright © 2010 John Wiley & Sons, Ltd.     

Lapped transform‐based codec for frame‐memory reduction in super‐quality LCD overdrive

Abstract— Overdrive is commonly used to reduce the liquid‐crystal response time and motion blur in liquid‐crystal displays (LCDs). However, overdrive requires a large frame memory in order to store the previous frame for reference. In this paper, a lapped transform‐based codec (LTC) is proposed to reduce the frame memory needed for LCD overdrive. In the latest literature, a directional prediction‐based codec (DPC) employs eight directional predictions, which takes up a large percentage of the computational complexity of the codec and does not consider the de‐correlation of the inter‐blocks. Therefore, the LTC first uses the lapped transform to decompose the correlation of the inter‐blocks in the YUV color space. A hadamard transform is then used for energy compaction. The reordered coefficients are pre‐quantized and encoded using the proposed adaptive bit‐plane coding (ABPC) method for a simple hardware implementation. The simulation results show that the proposed LTC significantly improves the DPC in both subjective and objective performance and outperforms the block truncation coding (BTC) and adaptive multi‐level BTC (AM‐BTC), which have been described in the literature.     

Digital time‐modulation pixel memory circuit in LTPS technology

Abstract— A digital time‐modulation pixel memory circuit on glass substrate has been designed and verified for a 3‐μm low‐temperature polysilicon (LTPS) technology. From the experimental results, the proposed circuit can generate 4‐bit digital codes and the corresponding inversion data with a time‐modulation technique. While the liquid‐crystal‐display (LCD) panel operates in the still mode, which means the same image is displayed on the panel, a data driver for an LCD panel is not required to provide the image data of the frame by the proposed pixel memory circuit. This pixel memory circuit can store the frame data and generate its corresponding inversion data to refresh a static image without activating the data driver circuit. Therefore, the power consumption of a data driver can be reduced in the LCD panel.     

Review Paper: A critical review of the present and future prospects for electronic paper

Abstract— The commercial success of monochrome electronic paper (e‐Paper) is now propelling the development of next‐generation flexible, video, and color e‐Paper products. Unlike the early battles in the 1980s and 1990s between transmissive and emissive display technologies, there is a extraordinary diversity of technologies vying to become the next generation of e‐Paper. A critical review of all major e‐Paper technologies, including a technical breakdown of the performance limitations based on device physics and commentary on possible future breakthroughs, is presented. In addition, the visual requirements for color e‐Paper are provided and compared to standards used in conventional print. It is concluded that researchers have much work remaining in order to bridge the significant gap between reflective electronic displays and print‐on‐paper.