横管初冷器液体喷洒系统的改进

介绍了横管初冷器液体喷洒系统存在的问题，改进方法及效果。     

In—situ Composite Based on Poly （ethylene terephthalate）,Polyamide and Polyethylene with Microfibres Formed through Extrusion and Hot Stretching

In-situ composites based on dispersed poly (ethylene terephthalate) (PET) or polyamide (PA),and continuous Polyethylene (PE) were prepared through a single screw extruder of Haake rheometer system with a rod-die relatively small in diameter.The extrudate was drawn at a drawing ratio of 3.1,and then quickly cooled in cold water.The specimens were obtained by injection molding at processing temperatures less than 190℃，far below the melting temperature of PET (265℃) and PA (230℃),which can maintain the solid state of PET and PA microfiber phase in the composites.Morphological observation with scanning electron microscopy (SEM) indicated that PET and PA can more or less form in-situ microfibers at compositions studied (0-20 wt pct PET or PA),and especially,PET and PA were almost deformed into fibers at the concentration of 15wt pct.Eensile strength and especially.PET and PA were almost deformed into fibers at the concentration of 15wt pct.Tensile strength and modulus of the blends reinforced by PET or PA microfibers showed to be increased from the tensile test results.The most noticeable improvement of the tensile properties occurred at 15wt pct of PET in PET/PE system,corresponding to the highest microfiber content,where the tensile strength reached 32.5 MPa,whereas only 19.5 MPa for the pure PE.     

TOP开关电源的设计与制作

利用TOP开关器件设计了一种高精度，输出电压可调的开关电源，并介绍了制作方法。     

微分代数方程的一类并行算法

本文提出求解微分代数方程的一类并行算法,进行误差估计。对于一个模型问题进行稳定性分析,画出稳定区域。计算实例表明算法是有效的。     

如何做好工程预结算审核工作

为有效地减少和避免工程结算纠纷 ,提高工作效率 ,对建设单位报送结算资料所应具备的审核条件作了介绍 ,提出了全面审核法等五种预结算工作的审核方法。     

制造业中、高级职业技术教育刍议

论述了制造业中、高级岗位职业技术教育的意义、现状、存在问题及其人才市场要求，探讨了办好制造业职业技术教育的几个关键问题。     

超声变幅杆解析法设计的可靠性研究

本文提出了用有限元法验证变幅杆解析法设计的可靠性，对三种类型的变幅杆先作解析法设计；然后利用有限元分析软件ANSYS进行模态分析，确定了变幅杆的固有频率，计算了固有频率与工作频率之间的相对误差，以此来评价解析法设计的可靠性；并分析了影响解析法设计可靠性的两个基本因素。     

两种自主开发的图形外延SiGe工艺

使用清华大学微电子学研究所研发的UHV/CVD系统深入研究了图形外延SiGe工艺,分别选用单一的SiO2介质层和SiO2/P0ly-Si复合介质层,作为图形外延SiGe单晶材料的窗口屏蔽介质,开发出了不同的实用化图形外延SiGe工艺.     

Growth of CeO_2, Y_2O_3 Buffer Layers for YBCO Coated Conductor

~~Growth of CeO_2, Y_2O_3 Buffer Layers for YBCO Coated Conductor     

基于S-CDMA的HFC上行信道接入协议性能仿真分析

讨论了基于S－CDMA的HFC网上行信道的高效接入协议－SAMA，提出了双信道接入机制的工作原理，并对系统性能进行了分析与计算机仿真，得到一些有意义的结论。