Prediction of High Methane-Recovery Regions and Gas Extraction Technology Based on Geodynamic Zoning of Bowels

An analysis is performed for the existing hypotheses and theories used for calculating the technological parameters of operations on methane extraction from coal seams. The priority of geodynamic processes in methane collector formation, as well as the methods applied for the morphometry and processing of the remote probing data are substantiated. The urgency is shown for the investigation into the autooxidation and other exothermic reactions proceeding in coal seams and leading to methane transition to the free state.     

'EUROPART'. Airborne particles in the indoor environment. A European interdisciplinary review of scientific evidence on associations between exposure to particles in buildings and health effects

The relevance of particle mass, surface area or number concentration as risk indicators for health effects in non-industrial buildings has been assessed by a European interdisciplinary group of researchers (called EUROPART) by reviewing papers identified in Medline, Toxline, and OSH. Studies dealing with dermal effects or cancer or specifically addressing environmental tobacco smoke, house dust-mite, cockroach or animal allergens, microorganisms and pesticides were excluded. A total of 70 papers were reviewed, and eight were identified for the final review: Five experimental studies involving mainly healthy subjects, two cross-sectional office studies and one longitudinal study among elderly on cardiovascular effects. From most studies, no definite conclusions could be drawn. Overall, the group concluded that there is inadequate scientific evidence that airborne, indoor particulate mass or number concentrations can be used as generally applicable risk indicators of health effects in non-industrial buildings and consequently that there is inadequate scientific evidence for establishing limit values or guidelines for particulate mass or number concentrations.     

Two-step seismic limit state design procedure based on non-linear LRFD and dynamic response analyses

Recently, the limit state design (LSD) or performance-based design have got popularity in the field of building design in Japan as well as in other countries. In the two design methods the structural reliability theory plays an essential role in setting design criteria as well as demonstrating the target reliability level to society. However, the conventional load and resistance factor design (LRFD) has been basically formulated supposing that safety checking is done on the basis of linear assumption of member forces and displacement. Therefore, when applying the LRFD for seismic design, for more accurate treatment of the non-linearity, a new procedure has to be explored especially for the ultimate limit state. Although several procedures for the structural reliability evaluation, treating non-linear displacement responses, have been proposed, they require complex procedures that may not be used in the practical design process. Accordingly, for applying it to a seismic LSD format based on the probabilistic concept, it is essential to manage two important requirements at the same time, accuracy and simplicity of procedure. In the present study, a new design format using the following two-step procedure is proposed to maintain both accuracy and simplicity; (1) a non-linear LRFD formulation, and (2) a formulation based on non-linear dynamic response analysis. Also, two design examples are presented.     

A study of a water-reducing agent from cashew nutshell liquid

The water-reducing agent better known as superplasticizer is a recent development. A number of base materials have been used for the development of such water-reducing agents which can act better than ordinary plasticizers in concrete. The sulphonated salts of melamine, napthalene, lignin, hydroxycarboxylic acids and hydroxylated polymers are some typical compounds. Recently cashew nutshell liquid obtained from a natural product waste as a thick black phenolic compound has been converted into a water-reducing agent. This paper describes the results obtained on its effectiveness in influencing the rheological properties of flow, viscosity, particle size distribution, etc, of cement particles in hydrating cements and the water-reducing capabilities in cement mortars and concretes.     

Effect of agitation, turbidity, aluminium foil reflectors and container volume on the inactivation efficiency of batch-process solar disinfectors

We report the results of experiments designed to improve the efficacy of the solar disinfection of drinking water, inactivation process. The effects of periodic agitation, covering the rear surface of the container with aluminium foil, container volume and turbidity on the solar inactivation kinetics of Escherichia coli (starting population = 10(6) CFU ml(-1)) were investigated. It was shown that agitation promoted the release of dissolved oxygen from water with subsequent decrease in the inactivation rates of E. coli. In contrast, covering the rear surface of the solar disinfection container with aluminium foil improved the inactivation efficiency of the system. The mean decay constant for bacterial populations in foil-backed bottles was found to be a factor of 1.85 (std. dev. = 0.43) higher than that of non-foil-backed bottles. Inactivation rates decrease as turbidity increases. However, total inactivation was achievable in 300 NTU samples within 8 h exposure to strong sunshine. Inactivation kinetics was not dependent on the volume of the water container for volumes in the range 500-1500 ml.     

Automatic seat level control using MEMS programmed with Lab VIEW

ABSTRACT

In most of the present day buses, the main problem that causes discomfort to the passengers sitting in the rear seats is that the seats are not maintained at the same level from the ground when the rear wheels of the bus encounter obstacles like speed breakers or pits. To overcome this problem, we have designed an MEMS-based Electro-hydraulic system. This articles aims at to give the overview of the MEMS-based Electro-hydraulic system.     

Environmental Implications of Treatment of Coastal Sewage Discharges

The environmental implications of implementing the requirement for treatment of coastal sewage prior to discharge, which were put forward in an EC draft Directive on municipal waste-water treatment, are examined. In order to establish the current situation, the results of a national survey of coastal and estuarine sewage discharges are presented. A review of the impact of sewage discharges on the marine environment is presented in conjunction with an assessment of the impact of sewage-treatment processes on the land and in the air. These aspects are integrated into overall conclusions about net environmental impact. Finally, a decision-tree approach to the assignment of priority to additional action required at individual locations is developed.     

A novel multi-electrode system for electrolytic and biological water treatments: electric charge transfer and application to denitrification

A novel multi-electrode system is proposed for electrolytic and biological water treatments. The multi-electrode system is comprised of multiple working electrodes and their counter electrode, where electric current or potential applied to each electrode is controlled independently. Experimental result for different electrolyte solutions showed that electric charge in the system was efficiently carried by dissociative electrolytes such as carbonate ions. This transfer mechanism is regarded as being effective both in keeping pH level around neutrality and in passing certain amounts of electric current especially in dilute solutions such as groundwater and surface water. A long-term (over 500 days) experiment also showed the enhanced and stable denitrification performance of biofilm-electrode reactor (BER) equipped with the multi-electrode system, comparing to former BERs. This superior performance was thought to be attributable to large effective surface area of electrode, the charge transfer mechanism by dissociative electrolyte, and the formation of highly reducing (or oxidizing) zones. From these results, we conclude that the multi-electrode system is useful for electrolytic and biological treatments of groundwater and surface water.     

A framework for rapid local area modeling for construction automation

Rapid 3D positioning and modeling in construction can be used to more effectively plan, visualize, and communicate operations before execution. It can also help to optimize equipment operations, significantly improve safety, and enhance a remote operator's spatial perception of the workspace. A new framework for rapid local area sensing and 3D modeling for better planning and control of construction equipment operation is described and demonstrated. By combining human-assisted graphical workspace modeling with pre-stored Computer-Aided Design (CAD) models and simple sensors (such as single-axis laser rangefinders and remote video cameras), modeling time can be significantly reduced while potentially increasing modeling accuracy.