氧化硅有序介孔材料MCM-41的微波水热合成及用于组装ZnO纳米粒子

与传统水热合成工艺相比,采用微波水热合成新工艺可以快速合成比表面积大、孔体积和孔径大、孔径分布范围更窄、孔洞呈六方排布的有序介孔材料MCM-41.微波水热合成工艺合成的MCM-41具有合成效率高、成功率高等特点,为此类介孔材料商业化提供了高效的技术手段.采用传统水热工艺合成MCM-41通常需要48～72 h,而采用微波水热合成技术仅需要30 min.采用X射线粉晶衍射(XRD),氮气吸附等技术手段对合成MCM-41材料的物相、比表面积、孔体积、孔径等进行了表征.采用微波水热合成MCM-41的工艺参数为:微波处理的温度120 ℃,时间30 min,微波辐射功率500 W,经过滤、洗涤、干燥、焙烧等处理后,得到的MCM-41具有六方排布的孔系,晶格常数a0=4.4nm,比表面积可达1113 m2/g,平均孔径为2.7 nm,与选用同样配方采用传统水热合成工艺合成的MCM-41的性能相当,却极大提高了合成效率.采用微波水热合成工艺,同样可以合成立方晶系的MCM-48和六方晶系的SBA-15等介孔氧化硅分子筛材料.此外,在微波合成的MCM-41中采用液相工艺成功组装了ZnO纳米粒子,并对组装在MCM-41中的纳米ZnO粒子进行了光催化降解苯酚的实验研究.     

Characterisation of the adsorption sites of hydrogen on Pt/C fuel cell catalysts

A key component of a hydrogen fuel cell is a catalyst to dissociate dihydrogen to hydrogen atoms. In the present study, the adsorption of hydrogen on Pt/C fuel cell catalysts has been investigated by inelastic neutron scattering spectroscopy.

Monitoring a clean Pt(50%)/C catalyst with low energy neutron spectroscopy, after exposure to dihydrogen at 20 K, as it was heated to room temperature, showed three distinct temperature regimes: (i) a decrease in intensity from 10 to 60 K, (ii) a rise to a maximum between 60 and 120 K and then (iii) a slow fall-off towards room temperature. We assign the three regions as: (i) desorption of physisorbed dihydrogen, (ii) dissociation of dihydrogen to give an adsorbed layer and (iii) damping of the response by an increasing Debye–Waller factor.

The vibrational INS spectra of a series of Pt/C catalysts prepared under varying conditions were similar indicating that the same types of site are common to all the catalysts, although the relative proportions of each site are sample dependent. Features at 520, 950 and part of the intensity at 1300 cm⁻¹ are assigned to hydrogen on (1 1 1) faces, in good agreement with single crystal data. The mode at 640 cm⁻¹ is assigned as the doubly degenerate asymmetric stretch of Pt(1 0 0) faces with the symmetric stretch near 550 cm⁻¹.

We assign the bending mode of the on-top site to the feature at 470 cm⁻¹. The Pt–H stretch mode was observed at 2079 cm⁻¹. This is a significant result: this is the first time that hydrogen on the on-top sites has been observed on nanosized platinum particles supported on high surface area carbon black. The width of the INS peak is surprisingly large and may give additional information on the type and relative proportions of the crystallographic faces present on the catalyst particles.     

Aliphatic heterocyclic polymers

Aliphatic polybenzoxazoles, polybenzothiazoles, and polybenzimidazoles have been prepared by three methods: in poly(phosphoric acid), by the polyamide precursor, and by melt polymerization. The melt polymerization method was found to be the most satisfactory. All of the aliphatic heterocyclic polymers had excellent thermal stability, resistance to alkaline hydrolysis, high glass transition temperatures, and a high degree of flexibility. The only class of polymer found having any degree of solubility, however, was the polybenzimidazoles. Aliphatic polybenzimidazole films were prepared by solution casting. These films were found to be extremely flexible at ambient and cryogenic temperatures. The films were unaffected by alkaline hydrolysis, even in an oxidizing medium. A molding prepared from the aliphatic polybenzimidazole had excellent physical properties at both cryogenic and room temperature.     

The longitudinal impact of enterprise system users’ pre-adoption expectations and organizational support on post-adoption proficient usage

Although enterprise systems (ES) are ubiquitous, many firms report less than stellar payoffs from these costly investments, with underutilization often attributed to failures in the implementation process. Unfortunately, research has not provided sufficient insights into these failures, in part because it has focused on actual usage, as opposed to proficient usage, as the benchmark for successful implementation. Moreover, research has not generally examined how the adoption process unfolds over time, thus overlooking potential underlying mechanisms that may help explain how adopters achieve proficiency. To begin addressing these shortcomings, we study how adopters’ pre-adoption expectations, enacted over time, can influence their post-adoption proficiency, by shaping how and why they spend time using the system during the adoption period. We analyzed time-lagged survey data from 153 financial analysts, required to adopt new ES-based software, at a multinational bank. We found that adopters who hold pre-adoption expectations reflecting greater internal and external motives to adopt the system as well as systematically integrate it into their work routines are more apt to use the system in ways that enhance their cumulative knowledge of it, and subsequently develop higher levels of proficiency post-adoption. Moreover, greater organizational support enhanced the impact of adopters’ expectations on proficiency, except when their actual use is low in which case organizational support had an adverse effect.     

Transport of the dicyanogold(i) anion

We have shown that dicyanogold(I), [Au(CN)(2)](-) is a common metabolite found in blood and urine samples of patients treated with different gold based drugs. Some patients have high levels of gold within their red blood cells (RBCs). Size exclusion and C18 reversed phase chromatography show that the majority of the gold in RBC lysates is bound to protein, but small molecules such as dicyanogold(I) and gold-glutathione complexes are also present. Dicyanogold incubation with red blood cells in vitro leads to a rapid and complete uptake of gold. This uptake is unaffected by DIDS, an inhibitor of the anion channel, but is blocked by the addition of external cyanide. Dicyanogold is also readily taken up by H9 cells, a continuous CD(4+) cell line. This uptake is significantly inhibited by N-ethylmaleimide, suggesting a requirement for sulfhydryl groups. Dicyanogold inhibits the replication of the AIDS virus, HIV, in a cell culture model.     

Why Teachers Must Learn: Student Innovation as a Driving Factor in the Future of the Web

User innovation is the key to the development and vitality of technology. As Huatong Sun wrote, “expanding the scope of localization practices and linking user localization efforts” to design cycles—including pedagogical design—will help bridge the gap between what teachers/designers create and what skills users/students need and want. This article theorizes the role of modern composition students and teachers as co-constructors of productive spaces for learning critical inquiry based on students’ statuses as digital natives. It focuses on a class of first-year composition students who reshaped an assignment to fit their own needs within the physical classroom and also enacted a shift to a virtual classroom. While doing so, they provided ways for each class member to individualize space within that digital environment, and they focused their project on examining the ways in which social networking forums colonize their daily lives. This article argues that by letting student innovation drive pedagogical practice—just as social media creators let user innovation drive the digital structures they produce—composition teachers can be assured of having a text for critique that blurs the lines between “private” student underlife and “public” classroom practice and legitimizes the creation of student-produced learning spaces. Using critical and cyberfeminist theories as lenses, this article draws conclusions about the future of computer usage in composition pedagogy based on students’ abilities to re-appropriate physical and digital classroom space.     

A photoluminescence-based quantum semiconductor biosensor for rapid in situ detection of Escherichia coli

This work describes a novel method of detecting Escherichia coli using photoluminescence (PL) emission from III–V quantum semiconductor (QS) devices functionalized with two different antibody-based architectures. The first approach employed self-assembled monolayers of biotinylated polyethylene glycol thiols to immobilize biotinylated antibody via neutravidin. In the second approach, we used QS microstructures coated with a thin layer of Si₃N₄ allowing direct functionalization with E. coli antibodies through hydrofluoric acid etching and glutaraldehyde-based reticulation. Atomic force, optical and fluorescence microscopy measurements were used to assess the immobilization process. Depending on the biosensing architecture, density of the immobilized bacteria was observed in the range of 0.5–0.7 bacteria/100 μm². The detection of E. coli at 10⁴ CFU/ml was achieved within less than 120 min of the bacteria exposure. It is expected that an even better sensitivity threshold could be achieved following further optimization of the method.     

A model for radar images and its application to adaptive digital filtering of multiplicative noise

Standard image processing techniques which are used to enhance noncoherent optically produced images are not applicable to radar images due to the coherent nature of the radar imaging process. A model for the radar imaging process is derived in this paper and a method for smoothing noisy radar images is also presented. The imaging model shows that the radar image is corrupted by multiplicative noise. The model leads to the functional form of an optimum (minimum MSE) filter for smoothing radar images. By using locally estimated parameter values the filter is made adaptive so that it provides minimum MSE estimates inside homogeneous areas of an image while preserving the edge structure. It is shown that the filter can be easily implemented in the spatial domain and is computationally efficient. The performance of the adaptive filter is compared (qualitatively and quantitatively) with several standard filters using real and simulated radar images.     

Low temperature synthesis and characterisation of lecontite, (NH4)Na(SO4)·2H20

Lecontite, (NH₄)Na(SO₄).2H₂O, was synthesised at room temperature in high purity compared to earlier work with a minor impurity of mascagnite, (NH₄)₂SO₄. Rietveld refinement of the XRD results confirmed the crystal structure and unit cell dimensions as published earlier. Raman and Infrared spectroscopy, in conjunction with factor group analysis, resulted in a complex pattern of overlapping sulphate, NH and OH modes. The NH modes υ₁ was observed around 2880 cm⁻¹, υ₂ around 1700 cm⁻¹ overlapping with water OH-bending modes, υ₃ around 3300 cm⁻¹ overlapping with water OH-stretching modes around 3023, 3185 and 3422 cm⁻¹, and υ₄ around 1432, 1447 and 1462 cm⁻¹. The sulphate group in the crystal structure displays a decrease in symmetry from T_d as evidenced by the activation of the ν₁ mode at 982 cm⁻¹ and the ν₂ mode around 452 cm⁻¹ in the Infrared spectrum. The υ₃ mode shows clear splitting in the infrared spectra with a strong band at 1064 cm⁻¹ accompanied by two shoulders at 1107 and 1139 cm⁻¹. The Raman spectra show three weak bands at 1068, 1109 and 1135 cm⁻¹ with a shoulder at 1155 cm⁻¹. Similar splitting was observed for the υ₄ mode around 611 and 632 cm⁻¹ in the Infrared and Raman spectra, respectively.     

Orthographic Structure Versus Morphological Structure: Principles of Lexical Organization in a Given Language.

Most models of visual word recognition in alphabetic orthographies assume that words are lexically organized according to orthographic similarity. Support for this is provided by form-priming experiments that demonstrate robust facilitation when primes and targets share similar sequences of letters. The authors examined form-orthographic priming effects in Hebrew, Arabic, and English. Hebrew and Arabic have an alphabetic writing system but a Semitic morphological structure. Hebrew morphemic units are composed of noncontiguous phonemic (and letter) sequences in a given word. Results demonstrate that form-priming effects in Hebrew or Arabic are unreliable, whereas morphological priming effects with minimal letter overlap are robust. Hebrew bilingual subjects, by contrast, showed robust form-priming effects with English material, suggesting that Semitic words are lexically organized by morphological rather than orthographic principles. The authors conclude that morphology can constrain lexical organization even in alphabetic orthographies and that visual processing of words is first determined by morphological characteristics. (PsycINFO Database Record (c) 2010 APA, all rights reserved)