BETaaS: A Platform for Development and Execution of Machine-to-Machine Applications in the Internet of Things

Wireless Personal Communications - The integration of everyday objects into the Internet represents the foundation of the forthcoming Internet of Things (IoT). Smart objects will be the building...     

Fabrication of CdSe‐Nanofibers with Potential for Biomedical Applications

The design and synthesis of nanostructured functional hybrid biomaterials are essential for the next generation of advanced diagnostics and the treatment of disease. A simple route to fabricate semiconductor nanofibers by self‐assembled, elastin‐like polymer (ELP)‐templated semiconductor nanoparticles is reported. Core–shell nanostructures of CdSe nanoparticles with a shell of ELPs are used as building blocks to fabricate functional one‐dimensional (1D) nanostructures. The CdSe particles are generated in situ within the ELP matrix at room temperature. The ELP controls the size and the size‐distribution of the CdSe nanoparticles in an aqueous medium and simultaneously directs the self‐assembly of core–shell building blocks into fibril architectures. It was found that the self‐assembly of core–shell building blocks into nanofibers is strongly dependent on the pH value of the medium. Results of cytotoxicity and antiproliferation of the CdSe‐ELP nanofibers demonstrate that the CdSe‐ELP does not exhibit any toxicity towards B14 cells. Moreover, these are found to be markedly capable of crossing the cell membrane of B14. In contrast, unmodified CdSe nanoparticles with ELPs cause a strong toxic response and reduction in the cell proliferation. This concept is valid for the fabrication of a variety of metallic and semiconductor 1D‐architectures. Therefore, it is believed that these could be used not only for biomedical purposes but for application in a wide range of advanced miniaturized devices.     

Fully digital BPSK demodulator for satellite supressed carrier telecommand system

In this paper, we present the design of a fully digital binary phase shift keying demodulator for application in satellite high‐rate suppressed carrier telecommand system. The proposed system digitalizes the received signal in the intermediate frequency stage using bandpass sampling technique, and the resulting baseband signal is used to synchronization of symbol and phase and to bit detection. The design of all functional modules is presented in details. Another innovation presented in this work is the inclusion of a non‐linearity in the phase synchronizer module to permit its operation independent from the signal amplitude. Moreover, aiming the characterization and performance evaluation of the system, we do some original mathematical analyses. Finally, test results show that the demodulator complies all the project requirements, and the prototype implementation loss, in terms of bit energy to noise power density ratio, is less than 0.3 dB. Copyright © 2016 John Wiley & Sons, Ltd.     

RPSF: a new QoS bandwidth request mechanism for the IEEE?802.16

The IEEE 802.16 standard is a Broadband Wireless Access (BWA) technology which offers Quality of Service (QoS) support to different types of applications. This standard defines the physical (PHY) and medium access control (MAC) layers. Its MAC layer defines different types of QoS mechanisms to support various types of applications, being the multicast polling one of these mechanisms. Under this mechanism, based on a contention process, every connection competes to gain access to the channel in order to place its bandwidth requests. In this paper, we propose a new signalling mechanism, called Requests Per Service Flow (RPSF), to reduce the contention phase in the frame. Additionally, we undertake a comparison of this new method with respect to other mechanisms. The simulation results show that our new proposal outperforms other mechanisms recently reported in the literature, in terms of throughput and end-to-end delay.     

Common-Mode Response Overlapping vs. Shaping in Rail-to-Rail Op-Amp Input Stages

In this paper, a circuit technique—common-mode (CM) response overlapping—for maintaining the small-signal behavior of rail-to-rail amplifiers nearly constant over the whole input CM range, is introduced. This technique modifies the CM response of the rail-to-rail input stage adequately by means of two constant input floating voltage sources, which are adjusted by using a static tuning section. Its performance is compared with a second technique—CM response shaping—, which is also based on two variable input floating voltage sources, but relies on a dynamic feedback tuning loop. Experimental results obtained from two 3-V 0.8-m CMOS single-stage rail-to-rail amplifiers, which operate with CM response overlapping and shaping, respectively, are provided.     

Intratumoral Thermal Reading During Photo‐Thermal Therapy by Multifunctional Fluorescent Nanoparticles

The tremendous development of nanotechnology is bringing us closer to the dream of clinical application of nanoparticles in photothermal therapies of tumors. This requires the use of specific nanoparticles that must be highly biocompatible, efficient light‐to‐heat converters and fluorescent markers. Temperature reading by the heating nanoparticles during therapy appears of paramount importance to keep at a minimum the collateral damage that could arise from undesirable excessive heating. In this work, this thermally controlled therapy is possible by using Nd³⁺ ion‐doped LaF₃ nanocrystals. Because of the particular optical features of Nd³⁺ ions at high doping concentrations, these nanoparticles are capable of in vivo photothermal heating, fluorescent tumor localization and intratumoral thermal sensing. The successful photothermal therapy experiments here presented highlight the importance of controlling therapy parameters based on intratumoral temperature measurements instead of on the traditionally used skin temperature measurements. In fact, significant differences between intratumoral and skin temperatures do exist and could lead to the appearance of excessive collateral damage. These results open a new avenue for the real application of nano­particle‐based photothermal therapy at clinical level.     

Scalable and fault‐tolerant key agreement protocol for dynamic groups

With the widespread use of the Internet, the popularity of group communication‐based applications has grown considerably. Since most communications over the Internet involve the traversal of insecure networks, basic security services are necessary for these collaborative applications. These security services can be facilitated if the authorized group members share a common secret. In such distributed applications, key agreement protocols are preferred to key distribution protocols. In the past two decades, there have been many proposals for key agreement protocols. Most of these protocols are not efficient and limit the size of the underlying group. In this paper, we consider the scalability problem in group key agreement protocols. We propose a novel framework based on extension of the Diffie–Hellman key exchange protocol. The efficiency of our protocol comes from the clustering of the group members, where the common session key is established collaboratively by all participants. We present the auxiliary protocols needed when the membership changes. We show that our protocol is superior in complexity in both communication and computation overheads required to generate the session key. Copyright © 2006 John Wiley & Sons, Ltd.     

Effects of different levels of fat on rheological changes and microstructure of meat batters during heat processing

Summary The effect of differences in fat content (5.3% and 20.8%) on the rheological characteristics and microstructure of meat batters in the course of heating was studied. Rheological properties were assessed using nondestructive measurements (thermal scanning rigidity monitor) and structural failure (penetration test) analyses. Microstructure was studied by scanning electron microscopy (SEM). The influence of fat content on the modulus of rigidity (G) only became evident as gel structures began to form, giving higher G values for meat batters the higher the fat content of the sample. As the temperature was raised in the product (between 40 and 70° C), penetration stress and elasticity increased. The work of penetration, on the other hand, increased between 40 and 60° C, remaining steady at higher temperatures. Analysis of the results on the basis of different treatments indicates that an increase in fat content significantly raises penetration stress, elasticity and work of penetration. Increased temperature causes the formation of a matrix structure typical of heat-induced protein gels, which became compact and determine the formation of stronger, more elastic structures. Differences in microstructure caused by fat content were more evident at low temperature (40° C).

---

Auswirkungen verschiedener Fettgehalte auf die rheologischen Veränderungen und Mikrostruktur von Fleischmischungen während des Erwärmungsprozesses

Zusammenfassung Es wurde die Wirkung verschiedener Fettgehalte (5,3% und 20,8%) auf die rheologischen Eigenschaften und Mikrostruktur von Fleischbräten während des Erwärmungsprozesses untersucht. Die rheologischen Eigenschaften wurden mittels nicht zerstörender Messungen (thermal scanning rigidity monitor, TSRM) und Penetrationstests bewertet. Die Untersuchungen der MikroStruktur wurde durch Raster-Elektronenmikroskopie (REM) durchgeführt. Der Einfluß des Fettgehalts auf den Festigkeitsgleitmodul (G) wird im gleichen Ausmaß ersichtlich, in welchem die Gelstrukturen beginnen, sich zu bilden. Je höher der Fettgehalt des Bräts ist, desto größer werden die G-Werte in den Bräten. Je mehr die Temperatur des Erzeugnisses gesteigert wurde (zwischen 40 °C und 70 °C), um so mehr stiegen Penetrationdruck und Elastizität an. Obwohl sich die Penetration zwischen 40 °C und 60 °C erhöhte, blieb diese bei höheren Temperaturen konstant. Die Analyse der Ergebnisse aufgrund der Behandlungen zeigt, daß ein größerer Fettgehalt den Penetrationdruck, die Elastizität und Eindringungseffekt bedeutend erhöhen. Die Erhöhung der Temperatur verursacht die Bildung von Matrix-Strukturen, die typisch für die durch Hitze herbeigeführten Proteingele sind, deren stärkere Verdichtung die Bildung von stärkeren und elastischeren Strukturen bedeutet. Die durch die Einwirkung des Fettgehalts in der Mikrostruktur entstandenen Unterschiede scheinen bei niedriger Temperatur (40 °C) klarer hervorzutreten.

     

Optomagnetic Nanoplatforms for In Situ Controlled Hyperthermia

Magnetic nanoparticles (M:NPs) are unique agents for in vivo thermal therapies due to their multimodal capacity for efficient heat generation under optical and/or magnetic excitation. Nevertheless, their transfer from laboratory to the clinic is hampered by the absence of thermal feedback and by the influence that external conditions (e.g., agglomeration and biological matrix interactions) have on their heating efficiency. Overcoming these limitations requires, first, the implementation of strategies providing thermal sensing to M:NPs in order to obtain in situ thermal feedback during thermal therapies. At the same time, M:NPs should be modified so that their heating efficiency will be maintained independently of the environment and the added capability for thermometry. In this work, optomagnetic hybrid nanostructures (OMHSs) that simultaneously satisfy these two conditions are presented. Polymeric encapsulation of M:NPs with neodymium‐doped nanoparticles results in a hybrid structure capable of subtissue thermal feedback while making the heating efficiency of M:NPs independent of the medium. The potential application of the OMHSs herein developed for fully controlled thermal therapies is demonstrated by an ex vivo endoscope‐assisted controlled intracoronary heating experiment.     

Bandwidth sharing under the assured forwarding Per-Hop behavior

The DiffServ’s Assured Forwarding (af) Per-Hop Behavior (phb) Group defines a differentiated forwarding of packets in four independent classes, each class having three levels of drop precedence. Specific end-to-end services based on thisphb are still being defined. A particular type of service that could assure a given rate to a traffic aggregate has been outlined elsewhere. In such a service, a fair distribution of bandwidth is one of the main concerns. This paper presents experimental work carried out to evaluate howaf distributes bandwidth among flows under different load conditions and traffic patterns. We focused on the effect that marking mechanisms have on bandwidth sharing among flows within a singleaf class. The traffic types we used includeudp flows, individual and aggregatedtcp flows, mix oftcp andudp, tcp sessions with heterogeneous round-trip times, as well as color-blind and color-aware re-marking at the aggregation point fortcp flows. Tests were performed on real and simulated networks. We have found certain conditions under whichaf distributes bandwidth fairly among nonadaptiveudp flows andtcp aggregates. Finally, we evaluate a basic rule for setting the parameters of the two-rate Three-Color Marker conditioning algorithm (trtcm) in order to achieve a better bandwidth distribution fortcp flows.