Carbon–polymer composites with extreme electrical conductivity

The aim of this study was to develop Carbon–polymer composites with extreme electrical conductivity (100 S/cm) combined with good flexural strength. Despite the many optimization methods described in the literature, no comprehensive optimization procedure was to be found because the formulation did not control by itself the final properties. This study showed the major influence of the processing conditions with these peculiar materials. A detailed study of the influence of the processing conditions on the microstructural and macroscopic properties was performed. We, thereby, proposed a comprehensive way to optimize the properties of the final product. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42274.     

后京都议定书时代的大都市:从手段到目的,从规划到激发

2008年,法国政府发起"后京都议定书时代大都市"和"未来都市巴黎"的研究,l'AUC事务所入选10家国际团队作为大巴黎研究项目的咨询顾问。本文展示了l'AUC事务所的方案及其他4个项目,分别针对当代规划、城市主义和建筑不同方面的主要问题:回收,生态城,紧凑和节点城市。     

Consideration of chiral optical fibres

Circular birefringence is a property of chiral materials. In this work, we consider the use of chiral materials in optical fibres to produce circularly birefringent optical fibres and in fibres where a contrast in circular birefringence contributes to forming the waveguide. (-)-menthyl methacrylate is also investigated as a possible material for the fabrication of such fibres.     

A monotone nonlinear finite volume method for approximating diffusion operators on general meshes

The basic principles of the discrete duality and nonlinear monotone finite volume methods are combined in order to obtain a new monotone nonlinear finite volume method for the approximation of diffusion operators on general meshes. Numerical results highlight both the second‐order accuracy of this method on general meshes and its capability to deal with challenging anisotropic diffusion problems on various computational domains. Copyright © 2016 John Wiley & Sons, Ltd.     

RF MEMS continuous reversible variable inductor based on a microfluidic network

In this work, RF MEMS continuous reversible variable inductor has been fabricated by using microelectronic technology and lamination process. We review, evaluate and compare this variable inductor with other work. The proposed inductor is a dual circular coil and has an inductance of few nH. The fundamental idea is to place a liquid droplet between the metal turns of a coil in order to modify the capacitive/resistive coupling between metal tracks and hence to change the stored magnetic energy. The SU-8 resin was used to realize the microfluidic channels and Au as metallic tracks. To prove the reversibility of the inductor, two cases were studied: filling and emptying of channels. The tuning range of the inductance is approximately 107 % at 1.6 GHz, making these devices very suitable as building blocks in many RF applications.     

用于敞开式变电站的特高压开关设备

作为1 100 kV的UHV(特高压)输电,面临技术--生态环境的巨大挑战.变电站的UHV开关装置模块,需要的是可靠、成本/效益比好、环境友好、可维护的方案.对于这些所需的参数以及技术规范的验证,采用AIS(空气隔离变电所)技术能完全满足这些需要.介绍由瓷柱式断路器、隔离开关和NCIT(非传统互感器)所组成的UHV模块.这些装置是根据模块原理预先设计好的,其中的设备间的连接肯定允许快速安装.在变电站设备控制和检测方面,模块是预制标准化.加拿大和德国的试验站对断路器、隔离开关等独立的开关元件,在1 100 kV上做BIL、SIL和工频等绝缘试验,性能表现非常优越.因为对于特高压电压等级,IEC标准至今尚未规定,所以将根据外推法和现场数据作合理解释.瓷柱式断路器采用了最新复合绝缘体技术,在安全方面有所改进.AIS方案其他的关键技术,例如环境保护和成本,在可比的功能间,根据市场估计价值,与GIS解决方法作了比较.     

Levels and distribution of polybrominated diphenyl ethers in water, surface sediments, and bivalves from the San Francisco Estuary

Polybrominated diphenyl ethers (PBDEs) were found in water, surface sediments, and bivalve samples that were collected from the San Francisco Estuary in 2002. sigmaPBDE concentrations in water samples ranged from 3 to 513 pg/ L, with the highest concentrations found in the Lower South Bay (range 103-513 pg/L) region, which receives approximately 26% of the Estuary's wastewater treatment plant effluents. The sigmaPBDEs in sediments ranged from below detection limits to 212 ng/g dry wt, with the highest concentration found at a South Bay station (212 ng/g dry wt), which was up to 3 orders of magnitude higher than other stations. The sigmaPBDE concentrations ranged from 9 to 64 ng/g dry wt in oysters (Crassostrea gigas), from 13 to 47 ng/g dry wt in mussels (Mytilus californianus), and from 85 to 106 ng/g dry wt in clams (Corbicula fluminea). Only three PBDE congeners were detected in bivalves, BDE-47, BDE-99, and BOE-100; these are the most bioaccumulative congeners from the commercial Penta-BDE mixture.     

Allelopathic effect of phenolic acids from humic solutions on two spruce mycorrhizal fungi:Cenococcum graniforme andLaccaria laccata

The aim of this investigation was to determine the impact ofp-hydroxyacetophenone,p-hydroxybenzoic acid, catechol, and protocatechuic acid on respiration of two spruce mycorrhizal fungi:Laccaria laccata andCenococcum graniforme. These phenols are produced byVaccinium myrtillus,Athyrium filixfemina, andPicea abies, predominant species of spruce forests in the Alps, and they are also present in humic solutions at 10^–10 M or 10^–5 M. Respiration of the two fungi was inhibited by the four phenolic acids, even at concentrations ranging from 10^–5 M to 10^–7 M. These data show phenolic acids from humic solutions have biological activity at extremely low concentrations, suggesting a contribution ofV. myrtillus, A. filixfemina, andP. abies to allelopathic inhibition of mycorrhizal fungi.     

Comparative Studies of the Superconducting Properties of Bi2Sr2CaCu2O8+δ and Bi1.7Pb0.3Sr2CaCu2O8+δ/Ag Random Composites

We report the results of the study of the resistive transition and the screening effect on similar random composites made of a silver matrix containing sintered superconducting grains of bismuth phase with two different stoichiometries. We show that most of the observed behaviors are compatible with a phenomenological approach in which the intergrain junctions behave as weak links whose the state depends strongly on temperature and field. We find that these links a much weaker in one of the series of samples.     

Design of evolutionary algorithms-A statistical perspective

This paper describes a statistical method that helps to find good parameter settings for evolutionary algorithms. The method builds a functional relationship between the algorithm's performance and its parameter values. This relationship-a statistical model-can be identified thanks to simulation data. Estimation and test procedures are used to evaluate the effect of parameter variation. In addition, good parameter settings can be investigated with a reduced number of experiments. Problem labeling can also be considered as a model variable and the method enables identifying classes of problems for which the algorithm behaves similarly. Defining such classes increases the quality of estimations without increasing the computational cost