Good ergonomics and team diversity reduce absenteeism and errors in car manufacturing

Prior research suggests that ergonomics work design and mixed teams (in age and gender) may compensate declines in certain abilities of ageing employees. This study investigates simultaneous effects of both team level factors on absenteeism and performance (error rates) over one year in a sample of 56 car assembly teams (N = 623). Results show that age was related to prolonged absenteeism and more mistakes in work planning, but not to overall performance. In comparison, high-physical workload was strongly associated with longer absenteeism and increased error rates. Furthermore, controlling for physical workload, age diversity was related to shorter absenteeism, and the presence of females in the team was associated with shorter absenteeism and better performance. In summary, this study suggests that both ergonomics work design and mixed team composition may compensate age-related productivity risks in manufacturing by maintaining the work ability of older employees and improving job quality.     

Infrared heated μ-blistering,a new fabrication technology for HARMST

Polymeric replication technologies such as injection moulding or hot-embossing have gained wide acceptance in the microtechnological community, microthermoforming of thin polymer foils, also called μ-blistering, still remains relatively unknown. Although the general potentials of the µ-blistering have already been pointed out, little work has been carried out addressing its capability for high aspect ratio microstructuring. In the scope of this work we therefore demonstrate the feasibility of μ-blistering to obtain aspect ratios for free standing structures of up to 7 within a process cycle time of <4 min. The presented processing technology uniquely combines manufacturing of macro-, micro- and even nanoscopic feature sizes in a single process.     

Small-angle neutron scattering from branched epoxide resins

Small-angle neutron scattering experiments in the range of q² from 0.01 to 25 nm⁻² have been carried out on branched epoxide resins based on bisphenol-A at the Institute Laue—Langevin (I.L.L) in Grenoble (q=(4π/λ) sin(θ/2)). Measurements were made with six samples in the range of M_W from 1500 to 19 000 and four concentrations between 1.3 and 10% (w/w) in deuterated diglyme. The results are as follows: (i) The mean square radius of gyration follows a relationship S²_z=4.69×10⁻⁴M^1.20_W (nm²). (ii) In all cases fairly large second virial coefficients A₂ are obtained which, however, decrease strongly with molecular weight. Above M_W=2500, the virial coefficient follows the relationship A₂=1.6M^−0.85_W (mol cm³g⁻²). (ii) The reciprocal particle scattering factor as a function of q² exhibits only a slight upturn and otherwise shows the behaviour of a randomly branched polycondensate. The slight upturn is discussed as being caused by the finite volume of the monomeric unit. Possible reasons for the high exponent in the S²_z versus M_W dependence are briefly discussed.     

Stretching and deformation vibrations of CH2, C(CH3) and O(CH3) groups of poly(methyl methacrylate)

Infrared and Raman spectra of atactic PMMA and infrared spectra of stereoregular PMMA and of its four deuterated derivatives

, were measured. They were used to assign the bands of stretching and deformation vibrations of CH₂, CCH₃ and OCH₃ groups in the infrared and Raman spectra and to discuss the effect of stereoregularity on these bands in the infrared spectra.     

Mandibular gland allomones ofDasymutilla occidentalis and other mutillid wasps

The mandibular gland secretion of the mutillid wasp,Dasymutilla occidentalis, possesses three short-chained ketones-4-methyl-3-heptanone (4MH), 4,6-dimethyl-3-nonanone (4,6DMN), 4,6-dimethyl-3-octanone (4,6DMO)—and several unidentified compounds. This is the first report of 4,6DMN as a natural product and its synthesis is described. These ketones, which are either known to be ant alarm pheromones or are structurally very similar to ant alarm pheromones, appear to function as allomones against ants, major potential predators of mutillid wasps. The major secretory component, 4-methyl-3-heptanone, which was identified in females and/ or males of the species analyzed within the generaDasymutilla, Timulla, Traumatomutilla, andPappognatha, appears to constitute a chemical character of the defensive secretions of these genera.     

Backscatter from the data plane – Threats to stability and security in information-centric network infrastructure

Information-centric networking (ICN) raises data objects to first class routable entities in the network and changes the Internet paradigm from host-centric connectivity to data-oriented delivery. However, current approaches to content routing heavily rely on data-driven protocol events and thereby introduce a strong coupling of the control to the data plane in the underlying routing infrastructure. In this paper, threats to the stability and security of the content distribution system are analyzed in theory, simulations, and practical experiments. We derive relations between state resources and the performance of routers, and demonstrate how this coupling can be misused in practice. We further show how state-based forwarding tends to degrade by decorrelating resources. We identify intrinsic attack vectors present in current content-centric routing, as well as possibilities and limitations to mitigate them. Our overall findings suggest that major architectural refinements are required prior to global ICN deployment in the real world.     

Validation of GOES and MODIS active fire detection products using ASTER and ETM+ data

In this study we implemented a comprehensive analysis to validate the MODIS and GOES satellite active fire detection products (MOD14 and WFABBA, respectively) and characterize their major sources of omission and commission errors which have important implications for a large community of fire data users. Our analyses were primarily based on the use of 30 m resolution ASTER and ETM+ imagery as our validation data. We found that at the 50% true positive detection probability mark, WFABBA requires four times more active fire area than is necessary for MOD14 to achieve the same probability of detection, despite the 16× factor separating the nominal spatial resolutions of the two products. Approximately 75% and 95% of all fires sampled were omitted by the MOD14 and WFABBA instantaneous products, respectively; whereas an omission error of 38% was obtained for WFABBA when considering the 30-minute interval of the GOES data. Commission errors for MOD14 and WFABBA were found to be similar and highly dependent on the vegetation conditions of the areas imaged, with the larger commission errors (approximately 35%) estimated over regions of active deforestation. Nonetheless, the vast majority (> 80%) of the commission errors were indeed associated with recent burning activity where scars could be visually confirmed in the higher resolution data. Differences in thermal dynamics of vegetated and non-vegetated areas were found to produce a reduction of approximately 50% in the commission errors estimated towards the hours of maximum fire activity (i.e., early-afternoon hours) which coincided with the MODIS/Aqua overpass. Lastly, we demonstrate the potential use of temporal metrics applied to the mid-infrared bands of MODIS and GOES data to reduce the commission errors found with the validation analyses.     

Hierarchical control of multiple resources in distributed real-time and embedded systems

Real-time and embedded systems have traditionally been designed for closed environments where operating conditions, input workloads, and resource availability are known a priori, and are subject to little or no change at runtime. There is increasing demand, however, for adaptive capabilities in distributed real-time and embedded (DRE) systems that execute in open environments where system operational conditions, input workload, and resource availability cannot be characterized accurately a priori. A challenging problem faced by researchers and developers of such systems is devising effective adaptive resource management strategies that can meet end-to-end quality of service (QoS) requirements of applications. To address key resource management challenges of open DRE systems, this paper presents the Hierarchical Distributed Resource-management Architecture (HiDRA), which provides adaptive resource management using control techniques that adapt to workload fluctuations and resource availability for both bandwidth and processor utilization simultaneously. This paper presents three contributions to research in adaptive resource management for DRE systems. First, we describe the structure and functionality of HiDRA. Second, we present an analytical model of HiDRA that formalizes its control-theoretic behavior and presents analytical assurance of system performance. Third, we evaluate the performance of HiDRA via experiments on a representative DRE system that performs real-time distributed target tracking. Our analytical and empirical results indicate that HiDRA yields predictable, stable, and efficient system performance, even in the face of changing workload and resource availability.     

Effect of pressure on three catalytic partial oxidation reactions at millisecond contact times

The effects of pressure on reactant conversion and product selectivities in three catalytic oxidation systems have been examined at pressures between 1 and > 5 atm. Reaction was sustained autothermally near adiabatic operating conditions at temperatures of 1000°C with residence times over the noble metal catalysts between 10^–4 and 10^–2 s. The three systems investigated were (1) HCN synthesis over Pt-10% Rh gauze catalysts, (2) methane oxidation to synthesis gas (CO and H₂) over rhodium-coated monoliths, and (3) ethane conversion to ethylene over platinum-coated monoliths. We find that selectivities in all three reactions do not change dramatically with approximately a five-fold increase in pressure. This strongly suggests that free radical homogeneous chain reactions are not significant in these processes and that they can be operated reliably above atmospheric pressure. For the synthesis of HCN over Pt-10% Rh gauzes, the selectivity to HCN can be maintained above 0.75 at pressures up to 5.5 atm. Selectivities to synthesis gas (CO and H₂) from a methane-air mixture over a Rh-coated foam monolith at pressures up to 5.5 atm were maintained above 0.90. Over a Pt-coated foam monolith, the selectivity to ethylene from ethane-air and ethane-O₂ mixtures was independent of pressure up to 6.5 atm and conversion rose slightly although it was necessary to maintain constant velocity and residence time over the catalyst to avoid carbon formation.This research was supported by DOE under Grant No. DE-FG02-88ER13878.