FRACTURE ASSESSMENT FOR SECONDARY LOADS

The fracture assessment of structures subjected to secondary loading systems was studied by FEM-analysis of a few illustrative two-dimensional examples. The first example is an edge-cracked plate with a thermal gradient. The FEM-calculations revealed that a purely elastic analysis yielded J-values that are in most cases considerably more conservative than the ones calculated from an elastic-plastic analysis. The results were further compared with different engineering type non-linear estimates. As a second example a crack emanating from a semi-circular notch in a rectangular plate was chosen. The plate was subjected to uniaxial tension along its boundaries. It turned out that for the cases considered the J-values were fairly close to those elastically predicted.     

Mutagenic consequences of the incorporation of 6-thioguanine into DNA

The stimulatory effect of phytin added to skim milk on acid production of Lactobacillus casei was examined. Phytin stimulated acid production of L. casei fairly well. The stimulatory effect of phytin on acid production was not shown when phytin was treated with Dowex 50 (H+) and neutralized by NaOH solution. The incinerated product of phytin maintained almost equal stimulatory effect on acid production as that before processing. The addition of Mn2+ in the amount contained in a reagent phytin augmented the stimulatory effect on acid production markedly. The further addition of Fe3+, Ca2+, Mg2+ and PO4(3-) in amounts corresponding to their contents in the preparation of phytin as well as Mn2+ increased the effect slightly. The four preparations of phytin contained 0.045-0.20% of Mn, and the greater the Mn content was, the greater the potentiation of acid production.     

Word-fragment cuing: The lexical search hypothesis.

In four experiments we evaluated aspects of the hypothesis that word-fragment completion depends on the results of lexical but not semantic search. Experiment 1 showed that the number of meaningful associates linked to a studied word does not affect its recovery when the test cue consists of letters and spaces for missing letters. Experiments 2 and 3 showed retroactive interference effects in fragment completion when words in a second list were lexically related to words in a first list but not when the words in the second list were meaningfully related. Experiment 4 indicated that for studied words, instructions to search at the word level facilitated completion performance and that instructions to generate letters to fill missing spaces had no effect. Other findings indicate that completion was affected by the number of words lexically related to the fragment and by the number of letters missing from the fragment. In general, experimental manipulations that focused on lexical characteristics were effective, and those that focused on semantic characteristics were ineffective. The findings support the conclusion that word fragments engender a lexical search process that does not depend on retrieving encoded meaning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Transient Green’s Tensor for a Layered Solid Half-Space With Different Interface Conditions

Pulsed ultrasonic techniques can be and have been used to examine the interface conditions of a bonded structure. To provide a theoretical basis for such testing techniques we model the structure as a layer on top of a half-space, both of different elastic properties, with various interface bonding conditions. The exact dynamic Green’s tensor for such a structure is explicitly derived from the three-dimensional equations of motion. The final solution is a series. Each term of the series corresponds to a successive arrival of a “generalized ray” and each is a definite line integral along a fixed path which can be easily computed numerically. Willis’ method is used in the derivation. A new scheme of automatic generation of the arrivals and ray paths using combinatorial analysis, along with the summation of the corresponding products of reflection coefficients is presented. A FORTRAN code is developed for computation of the Green’s tensor when both the source and the detector are located on the top surface. The Green’s tensor is then used to simulate displacements due to pulsed ultrasonic point sources of known time waveform. Results show that the interface bonding conditions have a great influence on the transient displacements. For example, when the interface bonding conditions vary, some of the first few head waves and regular reflected rays change polarities and amplitudes. This phenomenon can be used to infer the quality of the interface bond of materials in ultrasonic nondestructive evaluation. In addition the results are useful in the study of acoustic microscopy probes, coatings, and geo-exploration.     

论网络升级方式与光纤选择的关系

在重点说明影响传输光纤设计的主要问题的同时，简要介绍了各种升级方式所面临的主要技术挑战，并详细说明这些挑战对传输光纤提出的技术要求。     

The morphology of rigid-rod polymers and molecular composites resulting from coagulation processing

The effects of processing conditions on the morphology of molecular composite films are examined by optical and electron microscopy. During coagulation processing from solutions in methanesulfonic acid (MSA), rigid-rod polymer, such as poly(p-phenylenebenzobisoxazole) (PBO), phase separates into undesirable aggregates. The coagulant and the method of its introduction have been found to exert a strong impact on the final film morphology. A quench of a PBO solution in MSA into a water bath results in a three dimensional interconnected network of PBO, while a slower introduction of water results in a more amorphous material. A computer simulation program of the coagulation process has been developed to better understand the different structures emerging from coagulation processing of molecular composites. The simulation results are in qualitative agreement with the experimental observations.     

Parental caregiving and child externalizing behavior in nonclinical samples: A meta-analysis.

A meta-analysis of 47 studies was used to shed light on inconsistencies in the concurrent association between parental caregiving and child externalizing behavior. Parent–child associations were strongest when the measure of caregiving relied on observations or interviews, as opposed to questionnaires, and when the measure tapped combinations of parent behaviors (patterns), as opposed to single behaviors. Stronger parent–child associations were also found for older than for younger children, and for mothers than for fathers. Finally, externalizing was more strongly linked to parental caregiving for boys than for girls, especially among preadolescents and their mothers. The meta-analysis helps account for inconsistencies in findings across previous studies and supports theories emphasizing reciprocity of parent and child behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Detection of West Nile virus by the polymerase chain reaction and analysis of nucleotide sequence variation

A polymerase chain reaction (PCR) assay was developed to rapidly detect and identify West Nile (WN) virus. The RNA from seven isolates of WN virus from six countries and four other flaviviruses (Kunjin, Japanese encephalitis, St. Louis encephalitis, and yellow fever viruses) was reverse-transcribed (RT) and amplified by PCR. The nucleotide sequences of the amplified products were determined by a rapid, automated DNA sequencing method. The WN virus RT/PCR assay detected the target gene segment of sequencing method. The WN virus RT/PCR assay detected the target gene segment of isolates from both the African-Middle Eastern group and the Indian group with a sensitivity of approximately 0.05 pg of viral RNA. Kunjin virus was the only other flavivirus tested that produced a band of the appropriate size. Five of seven WN virus isolates showed 92-98% homology in the nucleotide sequence of their PCR products. The sequence of one isolate was virtually identical to the published sequence of the Nigerian isolate (99.5% homology). No correlation was established between the degree of nucleotide homology, geographic location, time of isolation, or source of the isolates.     

Elimination of extra spring effect at the step-up anchor ofsurface-micromachined structure

This paper describes the concept, analysis, fabrication, and testing of a new anchor for surface-micromachined beams. The anchor is designed to eliminate the extra spring effect at the step-up anchor common in conventional surface-micromachined beams, so that the boundary condition follows the ideal anchoring condition more accurately. The idea is to form a reinforcement hump at the beam anchor through a minor modification in the sacrificial-layer mask. No modification in the fabrication process is necessary. Formation of the reinforcement hump is tested using the multiuser MEMS Process (MUMP) foundry service at the Microelectronics Center of North Carolina (MCNC). The effectiveness of the new anchor is analyzed by finite-element analysis based on the actual anchor geometry obtained from the fabrication directly. Experimental verification is provided by making overhanging microcantilever pairs, one with the new anchor and the other with conventional, through MUMP's and postprocessing and comparing their frequency responses. Small-signal frequency response measurements are made with a modified Michaelson interferometer. Resonant frequency of a 2-μm-thick 300-μm-long polysilicon cantilever with the new anchor differed by less than 0.1% from the ideal anchor case. In comparison, the resonant frequency of the same beam with a conventional anchor is off by over 1%