Theoretical Investigation of the Viscous Damping Coefficient of Hydraulic Actuators

The viscous damping coefficient(VDC) of hydraulic actuators is crucial for system modeling,control and dynamic characteristic analysis.Currently,the researches on hydraulic actuators focus on behavior assessment,promotion of control performance and efficiency.However,the estimation of the VDC is difficult due to a lack of study.Firstly,using two types of hydraulic cylinders,behaviors of the VDC are experimentally examined with velocities and pressure variations.For the tested plunger type hydraulic cylinder,the exponential model B=αυ~(-β),(α0,β0)or B=α_1e~(-β_1υ)+α_2e~(-β_2υ)(α_1,α_20,β_1,β_20),fits the relation between the VDC and velocities for a given pressure of chamber with high precision.The magnitude of the VDC decreases almost linearly under certain velocities when increasing the chamber pressure from 0.6 MPa to 6.0 MPa.Furthermore,the effects of the chamber pressures on the VDC of piston and plunge type hydraulic cylinders are different due to different sealing types.In order to investigate the VDC of a plunger type hydraulic actuator drastically,a steady-state numerical model has been developed to describe the mechanism incorporating tandem seal lubrication,back-up ring related friction behaviors and shear stress of fluid.It is shown that the simulated results of VDC agree with the measured results with a good accuracy.The proposed method provides an instruction to predict the VDC in system modeling and analysis.     

Differences in electrochemical corrosion behaviours between selective laser melted and wrought Ti6Al4V alloys in acid fluoride-containing artificial saliva

Journal of Applied Electrochemistry - In this work, the electrochemical corrosion behaviours of selective laser melted (SLMed) and wrought Ti6Al4V alloys in acid fluoride-containing artificial...     

Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding

Machining characteristics and surface integrity of advanced ceramics, including alumina, alumina–titania, and yttria partially stabilized tetragonal zirconia, were studied under high speed deep grinding conditions. Material removal mechanisms involved in the grinding processes were explored. The material removal in the grinding of alumina and alumina–titania was dominated by grain dislodgement or lateral cracking along grain boundaries. The removal for zirconia was via both local micro fracture and ductile cutting. It was found that under a feed rate of 500 mm/min and for all the wheel speeds used, an increase in the wheel depth of cut (DOC) from 0.1–2 mm slightly improved the ground surface finish, but greatly prolonged the wheel life. This increase did not deepen the subsurface damage layer for the alumina and alumina–titania, but resulted in a slightly deeper damage layer for the zirconia.     

Role of platinum in the Na2SO4-Induced hot corrosion resistance of aluminum duffusion coatings

Electrochemical corrosion measurements have been carried out with Pt-containing and Pt-free Al-diffusion coatings on IN 738 LC in a 90Na₂SO₄+ 10K₂SO₄ (mol%) melt at 1173 K. Pt improves the resistance to basic fluxing while there are no significant differences between both coating types in their resistance to acidic fluxing. The corrosion resistance of the Pt-containing coating is also higher in the passive potential region where protective scales rich in Al₂O₃ are formed. The reason for the different behavior of both coating types appears to be related to the high corrosion resistance of the Pt-rich surface layer of the coating and an increased Al₂O₃ content in the scale of the Pt-containing type.     

如何提高模具质量

介绍了提高模具质量的基本途径，分析了模具的正确使用与维护对其寿命的影响。     

Pd—DBS—偶氮胂新显色体系的分光光度法测定钛合金中微量钯

在较高酸度的H_3PO_4介质中钯与DBS—偶氮肿的新显色反应有较高的选择性。钯含量在0～10μg/10ml符合比尔定律,ε_(610)=2.37×10~4。提出不经分离,准确、快速测定钛合金中微量钯的方法。     

Practical chosen-ciphertext secure Hierarchical Identity-Based Broadcast Encryption

We focus on practical Hierarchical Identity-Based Broadcast Encryption (HIBBE) with semantic security against adaptively chosen-ciphertext attacks (CCA2) in the standard model. We achieve this goal in two steps. First, we propose a new HIBBE scheme that is secure against chosen-plaintext attacks (CPA). Compared with the existing HIBBE scheme that is built from composite-order bilinear groups, our construction is based on prime-order bilinear groups. The much better efficiency of group operations in prime-order bilinear groups makes our proposed HIBBE scheme more practical. Then, we convert it into a CCA2-secure scheme at the cost of a one-time signature. Instead of extending one user hierarchy in the Canetti–Halevi–Katz approach from CPA-secure (\(l+1\))-Hierarchical Identity-Based Encryption [(\(l+1\))-HIBE] to CCA2-secure \(l\)-HIBE, our construction merely adds one on-the-fly dummy user in the basic scheme. We formally prove the security of these two schemes in the standard model. Comprehensive theoretical analyses and experimental results demonstrate that the proposed HIBBE schemes achieve desirable performance.