求延时限制下面积最小化工艺映射

随着ＶＬＳＩ技术的发展，工艺映射的目标从面积最小化转向为延时限制下的面积最小化。然而，求延时限制下面积最小化工艺映射技术仅仪在近地阶段。本文给出求解该问题的精确算法以及有关理论结果。     

PZT铁电薄膜的制备及电学性能研究

使用硝酸锆作锆源的溶胶－凝胶方法制备ＰＺＴ铁电薄膜。他们的电学性能被测试包括电滞回线，电流Ｉ（ｔ）特性，漏电流，矫顽场疲劳和老化。测到的ＰＺＴ薄膜剩余极化８．２μＣ／ｃｍ~２，矫顽场６８ｋＶ／ｃｍ．簿膜的寿命可超过１０~（１１）周期。     

DX centers in AlxGa1-xAs bulk alloy,AlAs/GaAs ordered,and disordered superlattices

Properties of theDX centers in Al_0.5Ga_0.5As bulk alloy (b-AL), (AlAs)₂ (GaSa)₂ ordered superlattice (o-SL) and (AlAs) _m (GaAs) _n disordered superlattice (d-SL) (m = 1, 2, 3,n = 1, 2, 3) with the same macroscopic composition were measured and compared. By deconvolution of deep level transient spectroscopy (DLTS) spectrum due to theDX center, we have found a decrease in the number of separate peaks in DLTS spectrum in an intentionally atomic ordered arrangement. Visiting Scholar of the Japan Society for the Promotion of Science. On leave from Department of Electrical Engineering, San Jose State University, San Jose, California 95192-0084, USA.     

Electromagnetic scattering from arbitrary shaped conducting bodiescoated with lossy materials of arbitrary thickness

A simple and efficient numerical technique is presented to solve the electromagnetic scattering problem of coated conducting bodies of arbitrary shape. The surface equivalence principle is used to formulate the problem in terms of a set of coupled integral equations involving equivalent electric and magnetic surface currents which represent boundary fields. The conducting structures and the dielectric materials are modeled by planar triangular patches, and the method of moments is used to solve the integral equations. Numerical results for scattering cross sections are given for various structures and compared with other available data. These results are proved accurate by a number of representative examples     

黄河三门峡一花园口“82．8”大暴雨期间水汽输送分析

通过计算１９８２年７月２９日～８月２日黄河中游三门峡一花园口间区域的水汽通量、水汽通量散度和水汽净输送等特征量，分析了这次暴雨过程的水汽源地、水汽输送的物理过程和水汽净输送量与暴雨洪水的关系。结果表明，这次暴雨的水汽主要来自东部洋面上，低空偏东风急流和三花间地区的辐合上升运动共同构成了该地区水汽输送的通道，暴雨区内水汽的缔向福合是形成暴雨水汽福合的主要过程，水汽的经向辐散则是水汽输出的主要原因，而水汽的低层辐合、高层辐散及低层水汽向高层的垂直输送是降雨增强的机制。     

1981年8～9月黄河上游强连阴雨期水汽输送分析

对黄河上游兰州以上区域１９８１年８￣９月强连阴雨期主要降水时段水汽输送的计算和分析表明，这次降雨的水汽来自孟加拉湾，由５００ｈＰａ低槽前的西南气流输送水汽；降雨区内水汽的经向辐合是水汽辐合的主要过程，纬向辐散是水汽输出的主要机制，降雨中高原地形和垂直运动也明显影响了水汽输送和降雨；该区域水汽净输送量约占实测降雨量的９２％。     

An ADPCM Receiver for NTSC Composite Video Signals

An ADPCM codec for carrying one broadcast quality NTSC color TV channel at a bit rate of 42.9 Mb/s has been proposed. The system uses 3 fsc sampling, adaptive intrafield contour prediction, adaptive quantization., 4/8-bit dual length coding, and horizontal blanking interval suppression techniques. The receiver of.the video codec is designed and implemented in ECL for recovery of the original signal. The receiver accepts.a 42.9 Mb/s serial data stream with a synchronous clock from the transmitter. The receiver detects the line synchronization code, demultiplexes the audio signal and video signal, and generates the horizontal blanking patterns which have been removed at the transmitter side. The 4/8-bit dual length code is decoded and fed to the ADPCM reconstruction loop to obtain the reconstructed active video signal. The generated horizontal blanking pattern is multiplexed with the reconstructed video=signal and sent through a D/A converter to form the reconstructed analog NTSC composite video signal.     

POWER CONSUMPTION IN MECHANICALLY AGITATED CONTACTORS USING PITCHED BLADED TURBINE IMPELLERS

Power consumption was measured in mechanically agitated contactors of internal diameter 0.3 m, 0.57 m, 1.0 m and 1.5 m. Tap water was used as a liquid in all the experiments. The impeller speed was varied in the range of 0.3-13.33 r/s. Three types of impellers, namely disc turbine (DT), pitched-blade downflow turbine (PTD) and pitched blade upflow turbine (PTU) were employed. The ratio of the impeller diameter to vessel diameter (D/T) and the ratio of impeller blade width to impeller diameter (W/D) were varied over a wide range. The effects of impeller clearance from the tank bottom (C), blade angle (φ), total liquid height (H/T), number of impeller blades (n_b) and blade thickness (t_b) were studied in detail. Power consumption was measured using a torque table

Power number was found to have a strong dependence on the flow pattern generated by the impeller. Unlike, DT and PTU, the power number of PTD was found to increase with a decrease in clearance. The PTD (T/3) was found to have the lowest power number in all the vessels and the power number increased with either a decrease or an increase in the impeller diameter from T/3. The dependence of power number on impeller diameter was found to be more prominent when the D/T ratio was more than 0.3. In general, the power number was found to increase with an increase in blade angle and blade width. The effect of blade width was found to be more prominent in larger diameter vessels. A correlation has been developed for power number in the case of PTD impellers.     

HEAT-TRANSFER AND GAS-HOLDUP STUDIES IN A BUBBLE COLUMN: AIR-WATER-GLASS BEAD SYSTEM

Air-holdup and heat-transfer coefficient values are measured in a 0.305 m diameter bubble column equipped with a seven-tube bundle for the air-water and air-water-glass bead system. The dependence of these two properties on air velocity (up to 0.28 m/s), temperature (297-343 K), glass bead powder average size (50-143.3 μm), solids concentration in the slurry (up to 20 weight percent) and bubble column diameter (0.108 and 0.305 m), is experimentally investigated. The effect of internals, as simulated by a single probe and a seven-tube bundle, in the two bubble columns is also examined. The models and correlations commonly employed to estimate these properties are assessed on the basis of generated data.     

用单片机+CPLD实现液晶显示

本文介绍TC1602A液晶显示器的应用，以及单片机和CPLD综合应用的电路和软件设计，将CPLD应用到逻辑电路设计中，既简化了硬件电路，又节省了系统资源。