Metal Complexes of π-Conjugated Polymers

π-Conjugated chelating polymers such as poly(2,2′-bipyridine-5,5′-diyl), poly(1,10-phenanthroline-3,8-diyl), and salophen polymers have been prepared by organometallic polycondensations. The obtained polymers form metal complexes with various metal species such as [Ru(bpy)₂]²⁺ and CuCl₂. Metal complexes of π-conjugated ligands are also polymerized by dehalogenative organometallic polycondensations. Some of the metal complexes of π-conjugated polymers exhibit electrical conducting nature and show catalytic activity for redox reactions.     

Active sites of Cu-ZSM-5 for the decomposition of acrylonitrile

The catalytic decomposition of acrylonitrile (AN) over Cu-ZSM-5 prepared with various Cu loadings was investigated. AN conversion, during which the nitrogen atoms in AN were mainly converted to N₂, increased as Cu loading increased. N₂ selectivities as high as 90–95% were attained. X-ray diffraction measurements (XRD) and temperature-programmed reduction by H₂ (H₂-TPR) showed the existence of bulk CuO in Cu-ZSM-5 with a Cu loading of 6.4 wt% and the existence of highly dispersed CuO in Cu-ZSM-5 with a Cu loading of 3.3 wt%. Electron spin resonance measurements revealed that Cu-ZSM-5 contains three forms of isolated Cu²⁺ ions (square-planar, square-pyramidal, and distorted square-pyramidal). The H₂-TPR results suggested that in Cu-ZSM-5 with a Cu loading of 2.9 wt% and below, Cu⁺ existed even after oxidizing pretreatment. The activity of AN decomposition over Cu/SiO₂ suggested that CuO could form N₂, but, independent of the CuO dispersion, nitrogen oxides (NO_x) were formed above 350 °C. Cu⁺ and the square-pyramidal and distorted square-pyramidal forms of Cu²⁺ showed low activity for AN decomposition. Temperature-programmed desorption of NH₃ suggested that N₂ formation from NH₃ proceeded on Cu²⁺, resulting in the formation of Cu⁺. The Cu⁺ ions were oxidized to Cu²⁺ at around 300 °C. Thus, high N₂ selectivity over Cu-ZSM-5 with a wide range of temperature was probably attained by the reaction over the square-planar Cu²⁺, which can be reversibly reduced and oxidized.     

Mating Communication Systems of Four Plusiinae Species Distributed in Japan: Identification of the Sex Pheromones and Field Evaluation

The sex pheromones of four Plusiinae species in the family Noctuidae, Ctenoplusia albostriata (CA), Macdunnoughia purissima (MP), Syngrapha ain (SA), and Diachrysia stenochrysis (DS) were identified by GC-EAD and GC-MS analyses. These were subsequently evaluated by a series of field trials in different ecological habitats. CA females produced (Z)-5-decenyl acetate (I), (Z)-7-dodecenyl acetate (II), and (Z)-7-dodecen-1-ol (III) in a ratio of 2:100:13. While the antennae of CA males responded to all three components, neither I nor III was essential to capture males. The MP females produced II, III, and (Z)-5-dodecenyl acetate (IV) in a ratio of 100:80:20, and this blend captured the most MP males. Compounds II and III were also identified from SA females, and mixtures ranging from 4:1 to 2:3 were equally attractive to males. DS females only produced one active compound, (Z)-7-decenyl acetate (V), and DS is the first Plusiinae species identified as using only the ω3-compound and none of ω5-compounds, such as II and III, which are common components of Plusiinae pheromones. Using previously published chemical and biosynthetic data, together with the finding from this study, we propose a classification of the Plusiinae sex pheromones.     

Allelopathic Effects of Volatile Monoterpenoids Produced by <Emphasis Type="Italic">Salvia leucophylla</Emphasis>: Inhibition of Cell Proliferation and DNA Synthesis in the Root Apical Meristem of <Emphasis Type="Italic">Brassica campestris</Emphasis> Seedlings

Salvia leucophylla, a shrub observed in coastal south California, produces several volatile monoterpenoids (camphor, 1,8-cineole, -pinene, -pinene, and camphene) that potentially act as allelochemicals. The effects of these were examined using Brassica campestris as the test plant. Camphor, 1,8-cineole, and -pinene inhibited germination of B. campestris seeds at high concentrations, whereas -pinene and camphene did not. Root growth was inhibited by all five monoterpenoids in a dose-dependent manner, but hypocotyl growth was largely unaffected. The monoterpenoids did not alter the sizes of matured cells in either hypocotyls or roots, indicating that cell expansion is relatively insensitive to these compounds. They did not decrease the mitotic index in the shoot apical region, but specifically lowered mitotic index in the root apical meristem. Moreover, morphological and biochemical analyses on the incorporation of 5-bromo-2-deoxyuridine into DNA demonstrated that the monoterpenoids inhibit both cell-nuclear and organelle DNA synthesis in the root apical meristem. These results suggest that the monoterpenoids produced by S. leucophylla could interfere with the growth of other plants in its vicinity through inhibition of cell proliferation in the root apical meristem.     

Effect of zeolite in surface discharge plasma on the decomposition of toluene

Toluene was decomposed in a surface discharge plasma reactor packed with various zeolites. The positioning effect of the zeolite bed was also investigated Reactor-B, in which the zeolite bed was located upstream, performed much better than Reactor-A, in which the zeolite bed was located downstream. Furthermore, the decomposition efficiency in Reactor-B increased with the capacity for toluene adsorption on zeolite, while that in Reactor-A did not. The toluene adsorbed in micropores was not decomposed effectively by direct electron impact, but was decomposed by active oxygen species generated in the plasma zone on the zeolite surface. A good correlation was also observed between toluene decomposition and ozone consumption in the downward-type reactor.     

The effect of the hydrothermal treatment with aqueous NaOH solution on the photocatalytic and photoelectrochemical properties of visible light-responsive TiO2 thin films

The effect of the hydrothermal treatment with aqueous NaOH solution on the photoelectrochemical and photocatalytic properties of visible light-responsive TiO₂ thin films prepared on Ti foil substrate (Vis-TiO₂/Ti) by a radio-frequency magnetron sputtering (RF-MS) deposition method has been investigated. The hydrothermally treated Vis-TiO₂/Ti electrodes exhibited a significant increase in their photocurrent under UV and visible light irradiation as compared to untreated Vis-TiO₂/Ti electrode. SEM investigations revealed that the surface morphology of Vis-TiO₂/Ti are drastically changed from the assembly of the TiO₂ crystallites to the stacking of nanowires with diameters of 30–50 nm with increasing hydrothermal treatment time (3–24 h), accompanying the increase in their surface area. The separate evolution of H₂ and O₂ from water under solar light irradiation was successfully achieved using the Vis-TiO₂/Ti/Pt which is hydrothermally treated for 5 h, while the H₂ evolution ratio was 15 μmol h⁻¹ in the early initial stage, corresponding to a solar energy conversion efficiency of 0.23%.     

Identification of Pseudozyma graminicola CBS 10092 as a producer of glycolipid biosurfactants, mannosylerythritol lipids

A basidiomycetous yeast, Pseudozyma graminicola CBS 10092, was found to accumulate a large amount of glycolipids in the cultured medium when grown on soybean oil as the sole carbon source. Based on thin layer chromatography, the extracellular glycolipids gave spots corresponding to those of mannosylerythritol lipids (MELs), which are highly functional and promising biosurfactants. From the structural characterization by 1H and 13C NMR, the main product was identified as 4-O-[(4'-mono-O-acetyl-2', 3'-di-O-alka(e)noyl)-beta-D-mannopyranosyl]-D-erythritol, which is a highly hydrophilic derivative of MELs known as MEL-C. According to high-performance liquid chromatography analysis, the main product, MEL-C, comprised approximately 85% of all the MELs, and the total amount reached approximately 10 g/L for 7 days. The fatty acids of the present MEL-C consisted of mainly C6, C8 and C14 acids, considerably different from those of MEL-C produced by other Pseudozyma strains such as P. antarctica and P. shanxiensis. The observed critical micelle concentration (CMC) and the surface-tension at CMC of the MEL-C were 4.0 x 10(-6) M and 24.2 mN/m, respectively, while those of MEL-A, the most intensively studied MEL, were 2.7 x 10(-6) M and 28.4 mN/m, respectively. This implied that the MEL-C has higher hydrophilicity than conventional MELs hitherto reported. In addition, on a water-penetration scan, the MEL-C efficiently formed the lamella phase (Lalpha) at a wide range of concentrations, indicating its excellent self-assembling properties. From these results, the newly identified MELs produced by P. graminicola are likely to have great potential for use in oil-in-water type emulsifiers and/or washing detergents, and would thus facilitate a broad range of applications for the promising yeast biosurfactants.     

Formation of deagglomerated PLGA particles and PLGA-coated ultra fine powders by rapid expansion of supercritical solution with ethanol cosolvent

Rapid expansion of supercritical solution (RESS) was used for preparing polymer particles and polymer coating of ultra fine powders. The polymer of pharmaceutical interest was Poly(lactic-co-glycolic acid) (PLGA with PLA: PGA ratio of 85: 15 and MW of 50,000–75,000) and the simulated core particles were 1.4-μm SiO₂ and 70-nm TiO₂ particles. The supercritical solution was prepared by dissolving PLGA in supercritical carbon dioxide with ethanol as a cosolvent. Supercritical solution of CO₂-PLGA was sprayed through capillary nozzles to ambient conditions, resulting in formation of submicron PLGA particles. Similarly, rapid expansion of supercritical solution of CO₂-PLGA suspended with the core particles could provide solvent evaporation and deposition of submicron PLGA particles on the surface of the core particles, resulting in the formation of coating films on dispersed particles of SiO₂ and agglomerates of TiO₂. The influences of the core particle size, spray nozzle diameter as well as powder-to-polymer weight ratio were also investigated and discussed with respect to the coating performance.     

Study of Substrate Preheating on Flattening Behavior of Thermal-Sprayed Copper Particles

In this study, the effect of substrate preheating on flattening behavior of thermal-sprayed particles was systematically investigated. A part of mirror-polished AISI304 substrates were preheated to 573 and 773 K for 10 min, and then exposed to an air atmosphere for different durations of up to 48 h, respectively. Contact angle of water droplet was measured on the substrate under designated conditions. It was found that the contact angle increased gradually with the increase of substrate duration after preheating. Moreover, smaller contact angle was maintained on the substrate with higher preheating temperature. Commercially available Cu powders were thermally sprayed onto the substrates with the same thermal treatment history as contact angle measurement using atmospheric plasma-spray technique. The splat shape had a transitional changing tendency from a splash splat to a disk one on the substrate with a short duration after preheating, while reappearance of splash splat with the increase of duration was confirmed. In general, wetting of substrate surface by molten particles may dominate the flattening behavior of thermal-sprayed particles. The occurrence of desorption of adsorbed gas/condensation caused by substrate preheating likely provides good wetting. On the other hand, the poor wetting may be attributed to the re-adsorption of gas/condensation on the substrate surface with the increase of duration. In addition, the shear adhesion strength of coating fabricated on blasted AISI304 substrate was enhanced on the once-heated substrate, but weakened with the increase of duration. The changing tendency of the coating adhesion strength and the wetting of substrate by droplet corresponded quite well with each other.     

Hydrogen entry into steel during atmospheric corrosion process

Hydrogen entry and permeation into iron were measured by an electrochemical method during atmospheric corrosion reaction. The hydrogen permeation was enhanced on passive films because the hydrogen adsorption increased by the hydrogen evolution mechanism which is different from that on a bear iron surface. The permeation rate during a wet and dry corrosion cycle showed a maximum in the drying process depending upon the surface pH and the corrosion potential. The pollutant such as Na₂SO₃ which decreases the pH and the corrosion potential causes an increase in the permeation rate. The mechanism of the change in the permeation rate during the wet and dry cycles is explained by the polarization diagram of the electrode covered by thin water layer.