聚醚砜的磺化与热性能

以浓硫酸为溶剂 ,氯磺酸为磺化剂对聚醚砜 (PES)进行了磺化 ,制备了不同磺化度的磺化聚醚砜 (SPES)。探讨了反应的影响因素 ,分析了 SPES的热稳定性。结果表明 SPES的 Tg较 PES升高 ,随着磺化度的增加 ,SPES的降解温度降低。     

新型铝酸酯光稳定剂的研究

合成了五种新型铝酸酯光稳定剂并对其紫外吸收性能、荧光性能和热稳定性能进行了表征，探讨了光稳定剂结构、相对分子质量与其性能的关系，并验证它们的光稳定性及其在PE—LD中的光氧化稳定作用。还与紫外线吸收剂BAD和Tinuvin327进行了应用比较。     

超细CaCO3与金属氧化物M2O3对Al/AP/HTPB推进剂燃烧的催化协同效应研究

对超细及市售ＣａＣＯ３在低含量（≤１％）的情况下对丁羟推进剂燃烧性能的影响进行了研究，结果发现ＣａＣＯ３低含量时可提高推进剂的燃速且超细ＣａＣＯ３比市售ＣａＣＯ３的催化效率高。进一步研究了超细ＣａＣＯ３与金属氧化物Ｍ２Ｏ３组合对推进剂燃烧的催化作用，结果表明两者有协同效应，其组合的燃烧催化效果较各自单独使用的催化效果要好。     

Modeling of photocatalytic oxidation of VOCs in a packed bed reactor under continuous and discontinuous illuminations

In this paper, a mathematical model is presented to describe the photocatalytic degradation of VOCs in a packed bed reactor. Here, the adsorption of VOCs on the wall of the reactor is taken into account and the diffusion of VOCs in the axial direction is neglected. First-order kinetics is used to describe the photocatalytic oxidation of VOCs. The analytical solution of the present model is obtained by traveling wave method. The solution shows that the reactor performance is totally dependent on the inlet concentration of VOCs when the time is large enough. The present model is validated through the experimental result of the photocatalytic oxidation of trichloroethylene in a packed bed and the predicted results accord well with the experimental data. The influence of flow rate and inlet concentration on the performance of the reactor is discussed in detail. High flow rate offers high reaction rate and low conversion efficiency. The different inlet conditions and different reaction patterns are also investigated. The model would be useful to estimate the rate constant and help to the design of the reactor.     

基于Modbus/TCP协议实现人机界面与下位机通信

在以通用伺服电机控制系统为下位机的基础上,开发了以实时内核μC/OS-II、DSP、CPLD控制模块为核心的软硬件平台。通过移植uIP协议栈到DSP,在通信应用层上将Modbus帧嵌入到TCP帧中,简单可靠地实现了Modbus/TCP协议。同时将Modbus/TCP协议与μC/OS-II实时内核进行整合,更好地保证了系统调度的实时性。     

桌面虚拟化技术在多媒体教室管理中的应用

本文分析了多媒体教室管理的现状,提出通过桌面虚拟化技术解决日常管理中存在的管理难度大、维护人员多、管理效率低等问题,努力提高多媒体教室管理的集中化、安全性和高效率。     

Accommodation and convergence in integral imaging 3D display

In this paper, we analyze the visual fatigue of integral imaging three‐dimensional (3D) display by studying the accommodation and convergence when viewing the integral imaging 3D images. The theoretical analyses show that there is no inconsistency between the accommodation and convergence distances, which means that the integral imaging 3D display has no visual fatigue. Experiments are implemented, and the results finally demonstrate the rationality of the theoretical analyses. These analyses can be quite beneficial for researchers to better understand the performances and promote the practical applications of the integral imaging 3D display.     

Maximum error-bounded Piecewise Linear Representation for online stream approximation

Given a time series data stream, the generation of error-bounded Piecewise Linear Representation (error-bounded PLR) is to construct a number of consecutive line segments to approximate the stream, such that the approximation error does not exceed a prescribed error bound. In this work, we consider the error bound in \(L_\infty \) norm as approximation criterion, which constrains the approximation error on each corresponding data point, and aim on designing algorithms to generate the minimal number of segments. In the literature, the optimal approximation algorithms are effectively designed based on transformed space other than time-value space, while desirable optimal solutions based on original time domain (i.e., time-value space) are still lacked. In this article, we proposed two linear-time algorithms to construct error-bounded PLR for data stream based on time domain, which are named OptimalPLR and GreedyPLR, respectively. The OptimalPLR is an optimal algorithm that generates minimal number of line segments for the stream approximation, and the GreedyPLR is an alternative solution for the requirements of high efficiency and resource-constrained environment. In order to evaluate the superiority of OptimalPLR, we theoretically analyzed and compared OptimalPLR with the state-of-art optimal solution in transformed space, which also achieves linear complexity. We successfully proved the theoretical equivalence between time-value space and such transformed space, and also discovered the superiority of OptimalPLR on processing efficiency in practice. The extensive results of empirical evaluation support and demonstrate the effectiveness and efficiency of our proposed algorithms.     

Injectable hydrogels of poly(?-caprolactone-co-glycolide)-poly(ethylene glycol)-poly(?-caprolactone-co-glycolide) triblock copolymer aqueous solutions

Thermogelling triblock copolymers of poly(?-caprolactone-co-glycolide)-poly(ethylene glycol)-poly(?-caprolactone-co-glycolide) [P(CL-GA)-PEG-P(CL-GA)] were successfully prepared by control of the hydrophilicity/hydrophobicity balance and chemical compositions of the copolymers. The aqueous solutions of the copolymers underwent sol-gel transition as the temperature was increased from 20 to 60 °C. The amphiphilic copolymer formed micelles in water and a gel was formed by aggregation of micelles. The structure parameters played a critical role in determining sol-gel transition behavior. Either increasing [GA]/[CL] ratio or decreasing P(CL-GA) block length could induce the increase of the lower sol-gel transition temperature. Glycolide (GA) was incorporated into the polymer chain to increase the polymer degradation rate. Sustained release of rifampicin for approximately 32 days was obtained from the gel. It is believed to have potential applications in drug delivery and tissue engineering.