A Si bipolar 28-GHz dynamic frequency divider

A dynamic frequency divider applying the regenerative frequency division principle has been developed. A spiral inductor on the silicon substrate used as a load is characterized, and an improved one-port model with the substrate resistance is discussed. A 1/16 frequency divider was implemented with a silicon bipolar technology with a cutoff frequency of 40 GHz. The operation frequency range was 11.8-28.1 GHz, covering the Ka band (18-26.5 GHz). The inductive load has improved the maximum operation frequency by 7%, compared with a conventional circuit. Complemented with a 21-GHz static frequency divider previously reported by the authors, the whole microwave frequency range up to 26.5 GHz has been completely covered with the silicon bipolar technology. The maximum operation frequency of a silicon MMIC has been extended to the millimeter-wave frequency region for the first time     

Nanomanipulation of biological samples using a compact atomic force microscope under scanning electron microscope observation

We introduce a compact nanomanipulator that can be operated inside the sample chamber of a scanning electron microscope (SEM) for biological sample manipulation. The design of the nanomanipulator is based on that of an atomic force microscope (AFM). A self-sensitive cantilever is used to realize the compact body and thus it is possible to put a pair of the standalone AFM units on the sample stage in the SEM chamber. Using this system, we accomplished nanodissection of biological samples as well as AFM imaging under SEM observation. We then fabricated the surface of a rat renal glomerulus by scan-scratching and succeeded in making a small hole on the wall of a blood capillary. As a result, it was possible to observe the internal structure of the capillary, which had been hidden beneath the surface wall. Furthermore, using two AFM units on the sample stage of the SEM, we successfully dissected the lens fiber cells taken from a rat eye in a multi-probe operation using the two cantilevers. This system is expected to become a very useful tool for micro- and nanometer-scale anatomy and engineering applications.     

Responses of macroinvertebrate communities to river restoration in a channelized segment of the Shibetsu River,Northern Japan

The effects of restoration of channel meandering and of groyne structures on physical variables and river‐dwelling macroinvertebrates were examined in a lowland river, the Shibetsu River in Northern Japan. The lowland segment of the Shibetsu River, which previously meandered, was straightened by channelization and groynes installed on some portions of the channelized reach. In 2002, the channelization works were partly reversed to improve the degraded river ecosystem. Physical environment variables and macroinvertebrate community structure and composition were compared among reconstructed meanders and channelized reaches with and without groynes. The shear stress of the river edge in reconstructed meanders and groyne reaches was lower than that in a channelized reach. In addition, the edge habitat near the stream bank created by the reconstructed meander and groyne reaches had higher total density and taxon richness of macroinvertebrates than those of the channelized reach. Restoration provided a relatively stable edge habitat, contributing to the recovery of macroinvertebrate communities in such channelized lowland rivers. The placement of groynes can be an effective method of in‐stream habitat restoration for macroinvertebrates. Copyright © 2006 John Wiley & Sons, Ltd.     

Hepatocyte growth factor is involved in the morphogenesis of tooth germ in murine molars

The patterns of gene expression for hepatocyte growth factor (HGF) and its receptor, c-Met, were revealed in the tooth germ of rat mandibular molars using RT-PCR. In situ hybridization demonstrated that the HGF gene was expressed only in the cells of the dental papilla of the tooth germ in vivo. The characteristic temporospatial distribution of HGF and c-Met during germ development was revealed using immunohistochemical studies in vivo. In order to demonstrate the functional role played by HGF in tooth development, HGF translation arrest by antisense phosphorothioate oligodeoxynucleotide (ODN) was carried out in vitro. In the control experiment, explants of tooth germs from embryonic 14 day mice were cultured in a modification of Trowell's system under serum-free and chemically defined conditions for two weeks. Other explants were cultured with 15mer antisense or sense ODN targeted to the HGF mRNA. Both the control and the sense-treated explants showed normal histological structure, as observed in vivo. On the other hand, antisense-treated explants exhibited an abnormal structure in which the enamel organs were surrounded by a thin layer of dentin and dental papilla, appearing 'inside-out' compared to the control and sense-treated explants, although the cytodifferentiation of ameloblasts and odontoblasts was not inhibited. The explants treated with recombinant human HGF combined with antisense ODN showed normal development, indicating that exogenous HGF rescued the explants from the abnormal structure caused by antisense ODN. The findings of a BrdU incorporation experiment suggested that the imbalance between the proliferation activity of the inner enamel epithelium and that of the dental papilla caused by HGF translation arrest results in the abnormal structure of the tooth germ. These results indicate that HGF is involved in the morphogenesis of the murine molar.     

Urban warming trends in several large Asian cities over the last 100 years

In this paper, the long-term trends in surface temperature in several large Asian cities (Seoul, Tokyo, Osaka, Taipei, Manila, Bangkok, and Jakarta) have been analyzed for estimating the effects of urban warming. A new index, E-HII, is proposed: it is the value obtained by subtracting the temperature data of the four grids around the city from the observational temperature data in the city. Osaka shows the largest E-HII, increasing from approximately 2.4 °C in 1901 to almost 3 °C after 1981. The E-HIIs of Seoul, Tokyo, and Taipei, have increased by 1 °C to 2 °C. Jakarta and Bangkok exhibited a lower E-HII. E-HIIs of Manila and Bangkok have been increasing rapidly after 1961.     

Effects of Heating Rate on Stress Evolution in Alkoxide-Derived Silica Gel-Coating Films

Silica gel films were deposited by spin coating on single-crystal Si wafers using an acid-catalyzed Si(OC₂H₅)₄ solution as a coating solution. The gel films were heated at various rates, where in situ stress measurement was conducted. In-plane tensile stress developed during the course of heating, and was found to be larger at lower heating rates at temperatures up to 350°C. The larger stress was thought to cause cracking at lower temperatures, which was previously observed at lower heating rates in in situ observation. The larger stress at lower heating rates was basically ascribed to the larger degrees of densification, which was revealed in the larger extent of reduction in thickness as well as in Si–OH/Si–O–Si and O–H/Si–O–Si infrared absorption band area ratios at lower heating rates. The difference in stress at different heating rates appeared to originate mainly in the difference observed at low temperatures below 130°C, suggesting that the heating rate particularly affects the densification that occurs via solvent evaporation. The increment in stress was reduced over 400°C when the heating rate was low, which was thought to result from the higher degree of densification already achieved below 400°C as well as the structural relaxation occurring at such high temperatures.     

Intramolecular acyl migration and enzymatic hydrolysis of 2-O-α-D-glucopyranosyl-6-O-(2-pentylheptanoyl)-L-ascorbic acid

2-O-α-D-Glucopyranosyl-6-O-(2-pentylheptanoyl)-L-ascorbic acid (6-bDode-AA-2G) underwent an intramolecular acyl migration to yield approximately 12% of 2-O-α-D-glucopyranosyl-5-O-(2-pentylheptanoyl)-L-ascorbic acid (5-bDode-AA-2G) in neutral solutions for 3 days. In small intestine homogenate from guinea pigs for 12h, 6-bDode-AA-2G, which hardly underwent acyl migration to give 5-bDode-AA-2G, was predominantly hydrolyzed with α-glucosidase and then with esterase to ascorbic acid.     

Change in dynamic visual acuity (DVA) by pupil dilation

OBJECTIVE: This study was conducted to assess dynamic visual acuity (DVA) under pupil dilation. BACKGROUND: Pupil dilation may negatively affect driving performance. METHODS: Thirty healthy young adults (mean age 29.4 years) with pupil dilation participated in this study as the Mydrin P group. In addition to them, 15 healthy young adults (mean age 28.5 years) without pupil dilation were enrolled as the control group. DVA was measured binocularly with free-head viewing at 0, 30, 60, 120, and 360 min after mydriatic drop instillation in both eyes. Pupil size was measured at each time. RESULTS: In the Mydrin P group, DVA significantly improved at 30, 60, and 120 min (ANOVA; p < .01) but returned to the predilation level at 360 min (ANOVA; p = .61). Pupil size changed from 4.1 to 7.8 mm (ANOVA; p < .01) at 30 min after the instillation, and this level was maintained up to 120 min but returned to normal within 360 min. In the control group, DVA did not significantly change at all measured times (ANOVA; p > .9). DVA was significantly (p < .05) correlated with the pupil size at all measured times. CONCLUSION: The improvement in DVA was related to the enlargement of the pupil. This study suggests that the pupil size is one factor that may affect DVA. APPLICATION: Potential applications of this study include useful information to assess the effect of pupil dilation on driving performance.     

Microbial community analysis of thermophilic contact oxidation process by using ribosomal RNA approaches and the quinone profile method

Microbial community structure of a lab scale thermophilic aerobic wastewater treatment reactor was analyzed by a combination of culture-independent methods. Quinone profile method provides for chemical analysis of respiratory quinone molecular species, which corresponds to bacterial groups. Denaturing gradient gel electrophoresis (DGGE) of PCR-amplified 16S rDNA partial sequences (PCR-DGGE) clarifies community changes at species level, as DGGE can separate DNA fragments of different sequences. Certain phvlogenetic groups of bacterial cells can be labeled by fluorescence in situ hybridization (FISH). Quinone profile showed a predominant presence of MK-7. PCR-DGGE revealed that constituents of the community were unchanged during the stable phase. FISH demonstrated the existence of the relatives of Bacillus lentus and B. thermocloacae in considerable proportions. The community was mainly composed of Bacillaceae, and obligate thermophilic and mesophilic Bacillus appeared in spite of the temperature fluctuation from 35 degrees C to 60 degrees C. The combination of these culture-independent methods revealed the community precisely enough to evaluate the reactor performance.     

Intermediate temperature solid oxide fuel cell based on lanthanum gallate electrolyte

The Kansai Electric Power Co. Inc. (KEPCO) and Mitsubishi Materials Corporation (MMC) have been developing intermediate temperature solid oxide fuel cells (IT-SOFCs) which are operable at a temperature range between 600 and 800 °C. There are some significant features in IT-SOFC of KEPCO–MMC: (1) highly conductive lanthanum gallate-based oxide is adopted as an electrolyte to realize high-performance disk-type electrolyte-supported cells; (2) the cell-stacks with seal-less structure using metallic separators allow residual fuel to burn around the stack and the combustion heat is utilized for thermally self-sustainable operation; (3) the separators have flexible arms by which separate compressive forces can be applied for manifold parts and interconnection parts. We are currently participating in the project by New Energy and Industrial Technology Development Organization (NEDO) to develop 10 kW-class combined heat and power (CHP) systems. In FY2006, a 10 kW-class module was developed, with which the electrical efficiency of 50%HHV was obtained based on DC 12.6 kW. In the first quarter of FY2007, the 10 kW-class CHP system using the module gave the electrical efficiency of 41%HHV on AC 10 kW and the overall efficiency of 82%HHV when exhaust heat was recovered as 60 °C hot water. Currently, the operation has been accumulated for about 2500 h to evaluate the long-term stability of the system.