铝液夹杂物检测DMIRT－Ⅲ法的试验研究

提出了一种新的铝液夹杂物快速检测方法。导出了该法的检测原理方程。分析并试验研究了影响检测重复性和分辨率的因素。试验选择了较好的检测参数，并获得了较好的检测结果。     

Simulation study of peak junction temperature and power limitationof AlGaAs/GaAs HBTs under pulsed and CW operation

The authors have used a 3-D transmission-line matrix (TLM) modeling method to study the junction temperature distribution and power limitation of device geometries with multiple embedded heat sources. Peak values of the junction temperature against the dissipated power density under both pulsed and CW operation are presented for a typical power AlGaAs/GaAs HBT structure. These data should facilitate the rapid determination of junction temperature for a given output power, which is of paramount importance in power device design     

Determination of the liquidus lines and isotherms of the Hg-Zn-Te system by a modified direct observation method

The modified direct observation method is employed for the determination of the liquidus lines in the (Hg_{1_x}Zn_x)_{1_y}Te_y, ternary system. The liquidus temperatures of the ternary samples of various compositions withx from 0.05 to 0.30 andy from 0.5 to 0.9 are measured. The temperature-composition phase diagrams and some liquidus isotherms are established for this system.     

Efficient algorithms for SS/TDMA scheduling

Efficient scheduling algorithms for the slot assignment problem in a satellite-switched time-division multiple-access (SS/TDMA) system are presented. This problem is translated into a modified open-shop scheduling problem, allowing the use of known optimal algorithms. Their complexity is expressed as a function of the following parameters: the number of nonzero entries in the demand matrix, the number of uplinks, and the number of downlinks. According to the values of these parameters, the algorithm with the lowest computational complexity can be adopted. Although the computational complexity of previously published algorithms is drastically reduced, simulation results show that the results are close to previously presented solutions in terms of the assignment duration and the number of switching matrices     

结构粘结剂的试验研究

粘结剂是粘钢加固技术的关键材料,通过对粘结剂的试验研究,得到了粘结剂的拉压试验曲线与材料力学指标以及粘附于各种标号混凝土时,粘结层的抗剪强度;并且还进行了粘结剂的短期流变试验。     

可生物降解的钻井液降滤失剂SPS的合成与性能研究

以淀粉为主要原料合成了一种可生物降解的钻井液滤失剂ＳＰＳ，考察了ＳＰＳ的生物降解性及其在淡水泥浆，盐水泥浆和海水泥浆中的性能。结果表明，ＳＰＳ具有良好的降滤失与抗温、抗污染性能，在海水中可被生物降解。     

Self Assembly of Polymer Structures Induced by Electric Field

A method has been developed for fabricating polymer microstructures based on electric field induced self assembly and pattern formation. A dielectric fluid placed in between two conductive plates experience a force in an applied electric field gradient across the plates, which can induce a diffusive surface instability and self construction of the fluid surface. This process is exploited for the fabrication of self assembled polymer microstructures as well as replicated patterns through the use of pre-patterned plates or electrodes. FEM simulation is used to decide the minimum wavelength and electric gradient distribution of polymer structures. A variety of structures in the micron and nanometer scales including bio-fluidic MEMS, polymer optoelectronic devices can be fabricated using this method.