新型光电混合式电流互感器设计

设计了一种光电混合式电流互感器,它由传感头、光纤传输和光电转换器、信号处理电路和工作电源4部分组成。这种结构具有绝缘性能高、可靠性强、质量小等特点,并对误差情况进行了分析。     

宝钢120 t/30 t/10 t×27.6 m 桥式起重机有限元分析

应用有限单元法及MSC·MARC有限元分析程序,从实验工况和设计工况两方面分析了已使用多年的120 t/30 t/10 t×27.6 m桥式起重机主梁桥架变形及应力分布状态,该起重机的最大挠度、VONMISES等效应力、主梁的第一阶固有频率均符合设计规范,为延长其使用寿命提供了理论依据.     

撰写科技论文的要素

本文讨论了撰写科技论文时,包括论文的题目、前言、推导、实例、结论、提要和关键词等各种要素的作用和正确的撰写方法,列举一些写得比较好的范例和一些不很恰当的例子。同时也分析了在岩土工程科技论文写作中出现的一些如泛泛而谈、钻牛角尖、大而无当、背离工程实际、结论与前提不符等值得注意的倾向,指出了产生的原因并提出了解决的方法。     

Efficient fine granularity scalability using adaptive leaky factor

Fine Granularity Scalability (FGS) video coding has been adopted by the MPEG-4 standard for video streaming applications. In this paper, we propose a novel FGS coding scheme, which applied adaptive leaky factors for the enhancement layer prediction to further improve the coding efficiency of FGS. A flexible method that can dynamically determine the leaky factors according to the network conditions is also presented. With the proposed method, a better trade-off between the coding efficiency and drifting reduction can be achieved, and the coding performance is further improved compared with using a fixed leaky factor. Experimental results show that the proposed method can further improve the coding efficiency over a wide range of bitrate and packet loss ratio, and still keep the original characteristics, such as fine granularity, and bandwidth adaptation.     

TD-SCDMA标准化进展

依据演进次序，从3GPP R99、3GPP R4、3GPP R5、3GPP R6和3GPP R7五个方面对TD-SCDMA系列标准进行了概括的介绍，并对各标准的主要特点和新增功能进行了概述。     

OLAN光纤微机局域网的总体设计

本文提出了一种适合于特殊环境使用的光纤局域网的拓扑结构——类星型结构。这种结构解决了多通道的同时传输问题。此外,文中还对 OLAN 网的层次划分和各层的协议进行了分析和讨论。     

“新合纤”的研究开发

介绍了“新合纤”研究开发的历史过程以及“新合纤”的特征及其加工方法，讨论了“新合纤”研究开发的现状及其未来。     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

A COMPUTER-AIDED UNIFIED APPROACH TO MODELING PWM AND RESONANT CONVERTERS

This letter puts forward a method of modeling for the steady-state and small signal dynamic analysis on PWM, quasi-resonant and series/（parallel） resonant switching converters based on pulse-waveform integral approach. As an example, PWM and quasi-resonant converters are used to discuss the principle of the approach. The results are compared with those in the relative literatures. Computer aided analysis are made to confirm the correctness.     

基于偏振光干涉仪的Interleaver解复用器实验研究

为实现更窄信道间隔的密集波分复用 ,提出了一种基于偏振光干涉仪的新型Interleaver解复用器 ,分析了结构组成与基本工作原理 ,对其进行了初步的测试实验 ,该器件所分开的DWDM系统两组波长功率均衡 ,隔离度分别为 1 0 6dB和 1 4 6 4dB ,- 1dB带宽分别为 0 7nm和 0 4nm。