Prevalence of renal stones in a population-based study with dietary calcium, oxalate, and medication exposures

Little is known about the epidemiology of renal stones, in spite of the relative frequency of this painful condition. This population-based study examined reported renal stone diagnosis in 1,309 women aged 20-92 years to determine whether renal stones are associated with 1) food or water exposures or 2) lower bone mineral density and an increased likelihood of fractures. Results indicated a renal stone prevalence of 3.4%. The average age at diagnosis was 42 years. Renal stone formation was not associated with community of residence, hypertension, bone mineral density, fractures, high-oxalate food consumption, or ascorbic acid from food supplements. Women with renal stones consumed almost 250 mg/day less dietary calcium (p < 0.01) than did women without stones and had a lower energy intake (p < 0.04). The authors' findings do not support the hypothesis that increased dietary calcium is associated with a greater prevalence of renal stones, nor do they identify renal stones as a risk factor for low bone mineral density. Furthermore, lack of other identifiable environmental correlates and the relatively young age at initial diagnosis suggest that genetic components of renal stone formation need further study.     

Cuticle chirality and body handedness in Caenorhabditis elegans

BACKGROUND AND PURPOSE: Norway has the highest reported incidence of hip fractures in western Europe. Little is known about the epidemiology of falls in Norway where the winter season is long and dark. The objective of this work was to study reported falls and their consequences among elderly Norwegians living at home. METHODS: A cross-sectional design was used for the study. Interviews were performed in the homes of 431 subjects, aged 67-97 years, living at home. Information on falling was gathered through six questions: whether the subject had fallen during the last six months, and if so, how many falls they had, where the last fall occurred, its perceived reason, the activity the subject had been engaged in when the fall occurred, and the resulting injury. RESULTS: In all, 24.1% of subjects reported falling during the last six months, and 9.5% had suffered more than one fall. Falls were most frequently linked to external events (63.1%). Outdoor falls were more frequent (59.0%; 95% CI = 51.2-82.0) than indoor falls. Older subjects were associated with more frequent indoor falls (p < 0.05), but gender was not significant. Fifty-one per cent of subjects had fallen while walking and 53% had suffered an injury from the last fall. In 13.4% of the women and 16.2% of the men, the last fall had resulted in a fracture. CONCLUSIONS: Compared to the results of other studies from industrialized Western countries, a similar crude fall rate, similar frequency and similar type of injury were found. However, in contrast to other studies, no gender difference was observed with regard to falling, place of falling and fracture rate.     

Impaired splenic function and tuftsin deficiency in patients with intestinal failure on long term intravenous nutrition

Relatively little is known about the occurrence of neurocysticercosis in northeastern Brazil. There have been no published reports from the state of Ceará, but a review of the records at the Hospital S?o José in Fortaleza, Brazil identified 119 patients with neurocysticercosis diagnosed between January 1988 and April 1994. Patients came from 43 municipalities in Ceará. Their ages ranged from five to 74 years; the greatest number of cases were in persons 10-40 years of age; 63% were males. Seizures were the presenting complaint in 64% of the patients and headache in 22%. Two patients, each with several hundred intracranial lesions, presented with mental status changes; one was initially given the clinical diagnosis of viral meningoencephalitis. Computed tomography scans showed that 44% of the patients had five or more lesions. Cysts were found throughout the brain. The parietal lobe was the most frequent site of involvement; 85% of patients had one or more lesions there. The brain stem was involved in 8%. There was no consistent association between the severity of the clinical abnormalities and the radiologic findings. Computed tomography of the thighs was done in 10 persons; cysts were identified in nine.     

Investigation of GaAs Schottky barrier diodes in the THz range

The properties of GaAs Schottky barrier diodes as video detectors and mixing elements were investigated in the frequency range from 0.8–2.5 THz. For the most sensitive diode, the video responsivity and system noise temperature were measured as a function of incident laser power. The highest video responsivity was 2,000 V/W at 214μm and 60 V/W at 118μm. For five diodes differing in doping, capacitance, series resistance and anode diameter, the system noise temperature was measured at 214μm and 118μm. The best single sideband (SSB) values are 12,300 K and 24,200 K at 214μm and 118μm, respectively. The system noise temperature versus frequency is given over the range from 0.5–3 THz for two specific diodes demonstrating that the sharpness of the I–V characteristics is only of secondary importance for mixer perfomance at such high frequencies.     

Experimental evidence for mode shape influence on acceleration-induced frequency shifts in quartz resonators

Experimental results are presented to support the hypothesis that the shape and location of the active region of vibration in a thickness shear mode quartz resonator are the dominant factors in determining the acceleration sensitivity of the resonator. The shape and location of the mode in a real world resonator vary sufficiently from unit to unit (due to material and processing variations) that all other considerations are overwhelmed. It is shown experimentally that the mode shape and/or location can be trimmed with energy trapping by judicious addition or subtraction of mass to produce resonators with improved acceleration sensitivity.     

The preparation and properties of some lithium zinc silicate glass-ceramics

Lithium zinc silicate glasses are of interest for the preparation of moderately high thermal expansion glass-ceramics which are suitable for sealing to a number of nickel-based superalloys. The effect of composition, in particular the variation of nucleating species, on the crystallization behaviour of a number of these glasses has been examined using differential thermal analysis, X-ray diffraction, and electron microscopy. Various crystal phases have been identified, including cristobalite, quartz, tridymite and ₀ Li₂ZnSiO₄. In addition, most of the glass-ceramics also contain an unidentified phase which may be related to the-series of lithium zinc silicates. Heat-treatment schedules have been derived on the basis of these results in order to produce a number of glass-ceramic materials. The resultant thermal expansion characteristics of the glass-ceramics have been monitored using dilatometry, and expansions in the range 12.3 to 17.1×10^–6° C^–1 (20 to 460° C), have been obtained, depending on the precise glass composition and heat-treatment schedule employed. In addition, the mechanical properties of a number of selected samples have been monitored, employing a biaxial flexure technique.     

Numerical and experimental study of a nonisothermal turbulent jet with a heavy impurity

Temperature and momentum distributions of the carrier phase are determined experimentally and compared to results of numerical calculations using the (k–) model.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 50, No. 5, pp. 735–743, May, 1986.     

Distribution of disperse impurity in turbulent jet

The concentration fields of disperse impurity are calculated on the basis of a k- model of turbulence in a wide range of Stokes numbers.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 49, No. 4, pp. 548–555, October, 1985.     

Copper Assisted Inverted Pyramids Texturization of Monocrystalline Silicon in a Nitrogen Bubbling Bath for Highly Efficient Light Trapping

Silicon - Inverted pyramid (IP) texturization on silicon wafers has recently attracted attention for the structure’s light trapping ability and low specific surface area. The later property...     

SULFUR RECOVERY WITH REDUCED EMISSIONS, LOW CAPITAL INVESTMENT AND HYDROGEN CO-PRODUCTION

The main disadvantage of the Claus process is that by introducing air as oxidant a large volume of tail gas is produced. This must be treated to reduce atmospheric emissions of sulfur-containing gases. The costs of the tail-gas unit are a significant fraction of the total capital and operating costs for sulfur recovery. A new process uses thermal decomposition of hydrogen sulfide in the presence of carbon dioxide instead of air oxidation. The products of this reaction are hydrogen, carbon monoxide, elemental sulfur, water vapor and carbonyl sulfide. Carbonyl sulfide is easily converted to H₂S and C0₂ by liquid- or vapor-phase hydrolysis. Unreacted H₂S and C0₂ are recovered by absorption and recycled to the reactor. Since no air is introduced, there is no tail gas and the tail-gas unit is eliminated, giving a substantial reduction in capital investment. The concentrations of sulfur-containing gases in the product streams depend only on the operation of the absorber and stripper units and can be controlled to very low levels by increasing stripper boil-up. Process operating costs depend on the level of sulfur recovery required and can also be much lower than those of the modified Claus Process.

The process chemistry depends on a shift in the equilibrium of H₂S decomposition caused by reaction of hydrogen with C0₂ by the reverse of the water-gas-shift reaction. Catalysts for this chemistry have been identified. Reactor conversion is further improved by rapid cooling of the reactor effluent gas. Other aspects of process design and operation confer further advantages with respect to the Claus process; however, the process equipment used is similar to that used in a Claus plant. Retrofit of existing plant to the new technology can therefore be considered.