Surface topography and tribological properties of coatings prepared from microparticle size polyurethane dispersions studied by atomic force microscopy

The surface topography and mechanical properties of coatings prepared using large particle size polyurethane dispersions (PUD) are investigated using atomic force microscopy (AFM) imaging, AFM-based force measurements, and friction force microscopy. PUD coatings, which are prepared from dispersions containing particles of micron size, have surface roughness of 250–300 nm and waviness of 2.5–3 μm resulting from the particle size. The surface moduli of the PUD coatings are varied by tuning the ratio of hard-to-soft segmentation in the polyurethanes and are found to be between 40 and 100 MPa. The friction coefficient obtained in the study is found to be correlated with both the surface modulus of the coatings and the adhesion between the probe and the samples and is well in line with the perceived feel of an experienced human panel. The data are very well behaved and clearly show the utility of this technique in characterizing these types of surfaces.     

Spray‐Coated Silver Nanowires as Top Electrode Layer in Semitransparent P3HT:PCBM‐Based Organic Solar Cell Devices

Silver nanowire (Ag NW) thin films are investigated as top electrodes in semitransparent inverted organic solar cells. The performance of semitransparent poly(3‐hexylthiophene‐2,5‐diyl):[6,6]‐phenyl‐C61‐butyric acid methyl ester (P3HT:PCBM) organic solar cells with Ag NW top electrode layers is found to match very closely the performance of reference devices based on thermally evaporated, highly reflective metal silver top electrodes. The optical losses of the semitransparent electrodes are investigated in detail and analyzed in terms of transmission, scattering, and reflection losses. The impact on an external back reflector is shown to increase the light harvesting efficiency of optically thin devices. Further analysis of transparent devices under illumination from the indium tin oxide (ITO) backside and through the Ag NW front electrode open the possibility to gain deep insight into the vertical microstructure related devices performance. Overall, Ag NW top electrodes are established as a serious alternative to TCO based electrodes. Semitransparent devices with efficiencies of over η = 2.0% are realized.     

N-acetylcysteine attenuates endotoxin-induced leukocyte-endothelial cell adhesion and macromolecular leakage in vivo

OBJECTIVE: To determine the influence of N-acetylcysteine on endotoxin-induced leukocyte-endothelial cell adhesion, vascular leakage, and venular microhemodynamics. DESIGN: Randomized, blinded, controlled trial. SETTING: Experimental laboratory. SUBJECTS: Thirty male Wistar rats. INTERVENTIONS: After pretreatment with N-acetylcysteine (150 mg/kg; n = 40; group A) or 0.9% saline solution (n = 10; group B) animals were given an intravenous infusion of endotoxin (Escherichia coli lipopolysaccharide 026:B6; 2 mg/kg/hr) over 120 mins. Animals in the control group (n = 10; group C) received a volume-equivalent infusion of 0.9% saline solution. MEASUREMENTS AND MAIN RESULTS: Leukocyte adherence, red cell velocity (VRBC), vessel diameters, venular wall shear rate, and macromolecular leakage were determined in mesenteric postcapillary venules using in vivo videomicroscopy at baseline and at 30, 50, 90, and 120 mins after the start of the endotoxin challenge. Endotoxin exposure induced a marked increase in adherent leukocytes (group B: baseline, 391 +/- 24 cells/mm2; 120 mins, 1268 +/- 131 cells/mm2; p < .01). N-acetylcysteine pretreatment attenuated the adherence of leukocytes during endotoxemia (baseline, 366 +/- 28 cells/mm2; 120 mins, 636 +/- 49 cells/mm2; p < .01 vs. baseline; p < .01 vs. group B). Leukocyte adherence in control animals (group C) did not increase significantly. Administration of N-acetylcysteine did not influence the decrease in VRBC observed during endotoxemia. In group B1 VRBC decreased during the infusion of endotoxin from 2.0 +/- 0.2 mm/sec at baseline to 1.1 +/- 0.2 mm/ sec after 120 mins (p < .01 vs. baseline; p < .05 vs. group C), and in group A from 2.2 +/- 0.2 mm/sec to 1.1 +/- 0.1 mm/sec after 120 mins (p < .01 vs. baseline; p < .05 vs. group C). In group C, VRBC remained unchanged (baseline, 1.7 +/- 0.2 mm/sec; at 120 mins, 1.5 +/- 0.2 mm/sec). The venular diameters remained unchanged in all groups during the entire study period. After 120 mins, the venular wall shear rate decreased from 502 +/- 62 secs-1 at baseline to 272 +/- 46 sec-1 in group B (p < .01), and from 563 +/- 45 secs-1 at baseline to 283 +/- 31 secs-1 in group A (p < .01). No differences in venular wall shear rate were observed between these groups. In group C, the venular wall shear rate remained unchanged (baseline, 457 +/- 54 secs-1; at 120 mins, 409 +/- 51 secs-1). Macromolecular leakage, expressed as perivenular/intravenular fluorescence intensity after injection of fluorescence-labeled albumin, increased from 0.29 +/- 0.03 to 0.58 +/- 0.03 (p < .01) during the infusion of endotoxin in group B. In contrast, pretreatment with N-acetylcysteine diminished the extravasation of albumin (baseline, 0.27 +/- 0.01; at 120 mins, 0.37 +/- 0.02; p < .01 vs. baseline; p < .01 vs. group B). CONCLUSION: These results demonstrate that N-acetylcysteine attenuates endotoxin-induced alterations in leukocyte-endothelial cell adhesion and macromolecular leakage, suggesting N-acetylcysteine might be therapeutic in the prevention of endothelial damage in sepsis.     

Oral acetylsalicylic acid induces biliary cholesterol secretion in the rat

Several agents can alter biliary cholesterol secretion, critical for cholesterol excretion and gallstone formation. Although salicylate effects on bile formation and gallstones have been studied, biliary lipid secretion has not been measured during oral aspirin treatment. We examined whether oral acetylsalicylic acid affects bile lipid secretion. Three groups of young rats were fed chow for 3 wk. Two of the groups then received aspirin at either 1.67 or 3.33 g/kg diet for 4 d. Serum, hepatic, and bile lipids were measured, as were enzymes of cholesterol synthesis and esterification. With oral aspirin, bile cholesterol secretion increased by 42% and hepatic cholesteryl ester content decreased by 40%. Serum cholesterol and hepatic free cholesterol did not change. To evaluate mechanisms of the cholesterol hypersecretion, hypothyroid animals fed low-fat or fish oil diets and repleted with triiodothyronine were also studied. Aspirin stimulated cholesterol secretion to a degree similar to triiodothyronine. An additive response was seen in fish oilfed rats. Aspirin did not appear to have a primary action on 3-hydroxy-3-methylglutaryl-CoA reductase or acyl CoA:cholesterol acyltransferase activities, and had no direct effect on esterification of cholesterol by isolated hepatocytes. Aspirin may directly increase cholesterol transport into bile or have cell membrane effects which alter cholesterol transport. It remains to be determined whether the observed alterations in bile cholesterol secretion are specific to the rat or also apply to humans.     

Einfluss des Anlassens auf die Warmhärte von P92 Blechmaterial

Influence of tempering on the hot hardness of P92 sheet metal The measurement of hardness at elevated temperatures allows a first estimation of the material concerning its high temperature strength. The advantage of this testing method is to determine the hardness as function of the temperature in a wide temperature range in a short time on a small specimen. Especially the hot hardness testing is suited to compare the influence of different heat treatments. In this work the influence of tempering time and temperature on the hot hardness of P92 were investigated. The results show a mathematical relation between the hardness at different temperatures and the Hollomon‐Jaffe‐Parameter, which allows in a certain range a replace of tempering time and tempering temperature.     

[18F]Flurpiridaz: Facile and Improved Precursor Synthesis for this Next-Generation Cardiac Positron Emission Tomography Imaging Agent

[¹⁸F]Flurpiridaz is a recently developed positron emission tomography tracer that is currently being investigated in phase III clinical trials to measure myocardial blood flow. The relatively long physical half-life of fluorine-18 alongside the high spatial resolution and outstanding myocardium-to-background ratio fuels its potential to be the next gold standard for the early detection of coronary artery disease. Notwithstanding the expected widespread use of [¹⁸F]flurpiridaz, the reported multistep synthesis of its precursor for radiofluorination involves a hazardous alkylation step using carcinogenic ethylene oxide, and a low overall chemical yield of 7 %. In this work, we have improved the overall yield more than fivefold and concurrently replaced the hazardous step. Specificity of binding of [¹⁸F]flurpiridaz to mitochondrial complex 1 was demonstrated by in vitro autoradiography on mouse heart tissue sections. These results thus pave the way for assessing myocardial blood flow and coronary flow reserve in mouse models of cardiovascular disease.     

In vivo neutralization of naturally existing antibodies against linear alpha(1,3)-galactosidic carbohydrate epitopes by multivalent antigen presentation: a solution for the first hurdle of pig-to-human xenotransplantation

Pig-to-human xenotransplantation of islet cells or of vascularized organs would offer a welcome treatment alternative for the ever-increasing number of patients with end-stage organ failure who are waiting for a suitable allograph. The main hurdle are preexisting antibodies, most of which are specific for 'Linear-B', carbohydrate epitopes terminated by the unbranched Gal-alpha(1,3)Gal disaccharide. These antibodies are responsible for the 'hyper-acute rejection' of the xenograft by complement mediated hemorrhage. For depletion of such antibodies we have developed an artificial injectable antigen, a glycopolymer (GAS914) with a charge neutral poly-lysine backbone (degree of polymerization n = 1000) and 25% of its side chains coupled to Linear-B-trisaccharide. With an average molecular weight of 400 to 500 kD, presenting 250 trisaccharide epitopes per molecule, this multivalent array binds anti-alphaGal antibodies with at least three orders of magnitude higher avidity on a per-saccharide basis than the monomeric epitope. In vivo experiments with non-human primates documented that rather low doses--1 to 5 mg/kg of GAS914 injected i.v.--efficiently reduce the load of anti-Linear-B antibodies quickly by at least 80%. This treatment can be repeated without any sensitization to GAS914. Interestingly, although the antibody levels start raising 12 h after injection, they do not reach pretreatment levels. The polymer is degraded and excreted within hours, with a minute fraction remaining in lymphoid tissue of anti-alphaGal producing animals only, probably binding to and inhibiting antibody-producing B-cells. The results of pig-to-non-human primate xenotransplantations established GAS914 as a relevant therapeutic option for pig-to-human transplantations as well. The synthesis of GAS914 was successfully scaled up to kg amounts needed for first clinical studies. Key was the use of galactosyl transferases and UDP-galactose for the synthesis of the trisaccharide.