New Structural Variants of Homoserine Lactones in Bacteria

N‐Acylhomoserine lactones (AHLs) are used by a wide variety of bacteria for cell–cell communication in “quorum‐sensing”. These compounds are derived from L ‐homoserine lactone and a fatty acid, which varies in chain‐length, degree of saturation, and the presence or absence of an oxygen atom at C‐3. In this study we describe for the first time the occurrence of acyl chains carrying a methyl branch, and present a GC‐MS‐based method that can be used to distinguish these compounds from unbranched isomers. The bacterium Aeromonas culicicola produces several methyl branched AHLs. In Jannaschia helgolandensis—a marine bacterium of the Roseobacter clade—a doubly unsaturated AHL, (2E,9Z)‐N‐(2,9‐hexadecadienoyl)‐L ‐homoserine lactone, occurs. The location and configuration of the double bonds was proven by spectrometric investigation and synthesis. Finally, a method was developed to establish the absolute configuration of 3‐hydroxyalkanoyl‐HSLs by mild cleavage and chiral gas chromatography. The AHLs synthesized during this study were tested in sensor systems specific for certain AHL types. The results show that these compounds display varying responses to the respective sensors; this underlines the importance of determining the whole bouquet of AHLs and its function to fully understand their importance for regulatory functions in bacteria.     

A lithographic approach to determine volume expansion factors during anodization: Using the example of initiation and growth of TiO2-nanotubes

The present work investigates the formation of nanotubes by anodizing titanium at 20 V in glycerol containing either 0.175 M or 0.35 M NH₄F. A photoresist-masking method of thin Ti films allows to use SEM cross-sections to directly obtain information on oxide morphology, layer thickness and metal substrate loss. Therefore not only features of the initial growth stages but also oxide expansion factors can accurately be determined. The expansion factors were found to be 2.4 for the initial formation of a barrier layer, 1.7–1.9 during pore initiation and 2.7–3.1 as the main nanotubes develop. These values (>2.6) suggest substantial contribution to steady state tube growth by a plastic oxide flow mechanism. Combined with RBS efficiency measurements the method presented here allows facile and direct investigation of the mechanism of pore/tube formation.     

NapWell: An EOG-based Sleep Assistant Exploring the Effects of Virtual Reality on Sleep Onset

Virtual Reality - We present NapWell, a Sleep Assistant using virtual reality (VR) to decrease sleep onset latency by providing a realistic imagery distraction prior to sleep onset. Our proposed...     

The efficiency of nanotube formation on titanium anodized under voltage and current control in fluoride/glycerol electrolyte

The formation of nanotubes on titanium is compared for anodizing under controlled voltage and controlled current in a fluoride/glycerol electrolyte. Rutherford backscattering spectroscopy and nuclear reaction analysis are employed to determine the film compositions. Film morphologies are examined by electron microscopy. The findings reveal films of approximate composition TiO(2).0.15TiF(4) that probably also contain derivatives of glycerol. Controlled voltage conditions resulted in more uniform final nanotube dimensions, for a particular charge density, and the highest efficiency of film growth, with the charge of the titanium in the film representing ～48% of the charge passed during anodizing. Under current control, the efficiency decreased from ～40% to ～23% with increase of the current density from 0.1 to 0.5?mA?cm(-2). Further, the thickness of the barrier layer was sometimes enhanced under current control, possibly due to a non-uniform current distribution and consequently elevated local temperature.     

Effects of Power Terms and Thermodynamics on the Contraction of Pinch Radius in Plasma Focus Devices Using the Lee Model

The influence of the power terms Joule heating and radiative losses on the pinch radius in plasma focus devices is studied. Numerical experiments were carried out using the Lee model on three plasma focus devices spanning a large range of storage energy (PF400, INTI PF, PF1000) with different filling gases (N, O, Ne, Ar, Kr, Xe). Six possible regimes each characterized by a combination of significant power terms affecting plasma focus dynamics are found and discussed. These six possible regimes are further moderated by thermodynamic effects related to the specific heat ratio SHR of the plasma. In PF1000, the thermodynamic compression effects are clearly apparent in the radius ratio versus pressure curve for nitrogen which with atomic number Z_n = 7 is less radiative than neon with Z_n = 10, the dominant line radiation being proportional to Z _n ⁴ . In neon radiative compression at optimum pressure is so dominant that it masks thermodynamic compression in the compression versus pressure graph. Results show that plasma radiation losses enhance the contraction of the plasma focus pinch radius within suitable pressure ranges characteristic of each machine for each gas discussed in this paper. The radiation enhancement of compression increases with the atomic number of the gas.     

Corrosion resistance studies on grain-boundary etched drug-eluting stents

In this paper we compare the influence of different microstructures on the corrosion resistance of new drug-eluting stainless steel stents, which have been produced by grain-boundary-selective electrochemical etching processes. The morphology of the stent surfaces was analysed by scanning electron microscopy (SEM), and the surface composition was investigated with Auger electron spectroscopy (AES) as well as with energy dispersive X-ray analysis (EDX). The passivity of the different microstructured stents was studied by cyclovoltammetry in Ringer solution. Release of nickel and chromium was assessed after potentiostatic experiments in Ringer solution by analysing the collected electrolyte with AAS. For stents produced by different two-step etching procedures bringing about ideal morphologies regarding the mechanical and biological properties of the surface, no significant differences in the passivation behaviour could be observed. A two-step process using first nitric acid and oxalic acid in a second step produces stent surfaces with very good corrosion properties: electrochemical analysis shows that the range of stable passivity is the same as for conventional stent surfaces, and low rates of nickel and chromium release are observed. The etching procedures do not seem to change the surface oxide layer composition.     

Friction and Wear Properties of Metal/Metal Hip Joints

Insufficient understanding of tribological behaviour of total joint components is considered as one of the major reasons for premature prosthesis failure. In the previous years, wear modes and mechanisms of artificial hips have been intensively studied using testing machines applying continuous motion and load profiles. Human locomotion, however, is of erratic shape containing motion interruptions among other irregularities. These occurring resting phases could influence adhesive friction at the artificial articulation with possible effects on wear and loosening. Initial frictional behaviour after resting periods and subsequent wear of metal‐on‐metal hip components have been investigated. While the initial frictional moment of artificial hip components was found to increase significantly with increasing resting duration, wear was hardly affected. These results therefore rather point to an interlocking phenomenon than adhesion. Still, the results are of concern because the increase in friction is likely to occur under physiological conditions too and may cause tangential stress peaks at the bone/ implant interface accelerating fatigue failure. In particular, big head sizes should be used with caution because the frictional moment is a function of coefficient of friction and ball diameter.