Defining syntax-directed translations by tree bimorphisms

We introduce a class of tree bimorphisms that define exactly the translations performed by syntax-directed translation schemata. We also show that these “quasi-alphabetic” tree bimorphisms preserve recognizability, and that their class is closed under composition and inverses.     

Estimating the altitude of aerosol plumes over the ocean from reflectance ratio measurements in the O2 A-band

A methodology is proposed to infer the altitude of aerosol plumes over the ocean from reflectance ratio measurements in the O₂ absorption A-band (759 to 770 nm). The reflectance ratio is defined as the ratio of the reflectance in a first spectral band, strongly attenuated by O₂ absorption, and the reflectance in a second spectral band, minimally attenuated. For a given surface reflectance, simple relations are established between the reflectance ratio and the altitude of an aerosol layer, as a function of atmospheric conditions and the geometry of observation. The expected accuracy for various aerosol loadings and models is first quantified using an accurate, high spectral resolution, radiative transfer model that fully accounts for interactions between scattering and absorption. The method is developed for POLDER and MERIS, satellite sensors with adequate spectral characteristics. The simulations show that the method is only accurate over dark surfaces when aerosol optical thickness at 765 nm is relatively large (> 0.3). In this case, the expected accuracy is on the order of ± 0.5 km or ± 0.2 km for POLDER or MERIS respectively. More accurate estimates are obtained with MERIS, since in this case the spectral reflectance ratio is more sensitive to aerosol altitude. However, a precise spectral calibration is needed for MERIS. The methodology is applied to MERIS and POLDER imagery acquired over marine surfaces. The estimated aerosol altitude is compared with in situ lidar profiles of backscattering coefficient measured during the AOPEX-2004 experiment for MERIS, or obtained with the space-borne lidar CALIOP for POLDER. The retrieved altitudes agree with lidar measurements in a manner consistent with theory. These comparisons demonstrate the potential of the differential absorption methodology for obtaining information on aerosol altitude over dark surfaces.     

Development of a pit filling algorithm for LiDAR canopy height models

LiDAR canopy height models (CHMs) can exhibit unnatural looking holes or pits, i.e., pixels with a much lower digital number than their immediate neighbors. These artifacts may be caused by a combination of factors, from data acquisition to post-processing, that not only result in a noisy appearance to the CHM but may also limit semi-automated tree-crown delineation and lead to errors in biomass estimates. We present a highly effective semi-automated pit filling algorithm that interactively detects data pits based on a simple user-defined threshold, and then fills them with a value derived from their neighborhood. We briefly describe this algorithm and its graphical user interface, and show its result in a LiDAR CHM populated with data pits. This method can be rapidly applied to any CHM with minimal user interaction. Visualization confirms that our method effectively and quickly removes data pits.     

Betriebsinformatik und Wirtschaftsinformatik als notwendige anwendungsbezogene Ergänzung einer allgemeinen Informatik – Vorschläge zur Verbesserung der akademischen Ausbildung auf dem Gebiet der automatisierten Datenverarbeitung in der Bundesrepublik Deutschland

Zusammenfassung  Nachdruck eines Aufsatzes aus elektronische datenverarbeitung 11(11)1969:544–548. This article is also available in English via and : Grochla E (2008) Corporate Information Systems Engineering and Business and Information Systems Engineering as a Necessary Application-Oriented Extension of General Computer Science – Proposals for Enhancing Academic Education in the Field of Automated Data Processing in the Federal Republic of Germany. Bus Inf Syst Eng. doi .

---

     

Continuous separation,with microfluidics,of the components of a ternary mixture: from vacuum to purge gas pervaporation

The general objective of this paper is to investigate the separation, with microfluidics, of the components of a ternary mixture, when using vacuum or purge gas pervaporation. The ternary mixture considered is a mixture of methanol (MeOH), water (H₂O) and hydrogen peroxide (H₂O₂). In a previous work (Ziemecka in Lab Chip 15:504–511, 2015), we presented the proof of concept of a microfluidic device, which was able to partially separate MeOH from the other components of such a mixture, by using vacuum pervaporation. Here, our goal is to optimize the operation of this device, by considering vacuum pervaporation, but also purge gas pervaporation. First, we provide a mathematical model of the device. This model is used to discuss the influence of the operating parameters on the device operation. To apply this model to the considered mixture, we determined the MeOH and H₂O permeability coefficients of PDMS membranes prepared from different concentrations of the curing agent. The model is then successfully compared to experimental data. The model and the experiments show that high efficiencies can be reached for both vacuum and purge gas pervaporation, provided a fine-tuning of the operating parameters. For instance, a good efficiency of the vacuum pervaporation is reached at high temperature and low pressure. For purge gas pervaporation, it is reached for low temperature and high pressure.     

Shakedown analysis of circular plates using a yield criterion of the mean

Structural optimization based on the shakedown theory is a powerful and promising technique. However, due to the nonlinearities of physical materials and the number of variable loads in real structures, it is computationally complex and time-consuming. To simplify the occurring non-linear, non-convex optimization problems, the paper suggests reducing the number of yield conditions. The so-called a yield criterion of the mean (integral yield condition) is analysed and explained in detail, which allows taking into account one yield condition for the entire finite element instead of multiple point-wise conditions. This approach shows promising results in numerical application to the optimization of a circular plate, considering a possibility of employing the yield criteria of the mean or pointwise yield conditions in different areas of the plate in particular. The methods applied are based on the assumptions of perfect plasticity and small deformations.     

A new DFM approach to combine machining and additive manufacturing

Design for manufacturing (DFM) approaches aim to integrate manufacturability aspects during the design stage. Most of DFM approaches usually consider only one manufacturing process, but product competitiveness may be improved by designing hybrid modular products, in which products are seen as 3-D puzzles with modules realized individually by the best manufacturing process and further gathered. A new DFM system is created in order to give quantitative information during the product design stage of which modules will benefit in being machined and which ones will advantageously be realized by an additive process (such as Selective Laser Sintering or laser deposition). A methodology for a manufacturability evaluation in case of a subtractive or an additive manufacturing process is developed and implemented in a CAD software. Tests are carried out on industrial products from automotive industry.     

Polyominoes simulating arbitrary-neighborhood zippers and tilings

This paper provides a bridge between the classical tiling theory and the complex-neighborhood self-assembling situations that exist in practice.The neighborhood of a position in the plane is the set of coordinates which are considered adjacent to it. This includes classical neighborhoods of size four, as well as arbitrarily complex neighborhoods. A generalized tile system consists of a set of tiles, a neighborhood, and a relation which dictates which are the “admissible” neighboring tiles of a given tile. Thus, in correctly formed assemblies, tiles are assigned positions of the plane in accordance with this relation.We prove that any validly tiled path defined in a given but arbitrary neighborhood (a zipper) can be simulated by a simple “ribbon” of microtiles. A ribbon is a special kind of polyomino, consisting of a non-self-crossing sequence of tiles on the plane, in which successive tiles stick along their adjacent edge.Finally, we extend this construction to the case of traditional tilings, proving that we can simulate arbitrary-neighborhood tilings by simple-neighborhood tilings, while preserving some of their essential properties.     

Evaluating meeting support tools

Many attempts are underway for developing meeting support tools, but less attention is paid to the evaluation of meetingware. This article describes the development and testing of an instrument for evaluating meeting tools. First, we specified the object of evaluation—meetings—by means of a set of input, process, and outcome factors. Then, we designed the process of evaluation, consisting of, first, the generation of meeting behavior in the form of a controlled series of meetings within the context of a project and, second, the measurement of the identified meeting factors. To measure these factors, a rating scale, questionnaires, and information flow analysis were used. Next, the instrument was tested, and the factors for successful meetings were determined in 13 projects in which four participants had to meet four times. The evaluation instrument proved to be a reliable and useful aid for the development and improvement of meeting tools.     

Effects of humidity changes on damping and stress relaxation in wood

Mechanical damping (tan ) and stress relaxation on pine veneer samples under stepwise humidity changes were investigated. The loss factor shows a transient peak every time the relative humidity (RH) of the surrounding atmosphere is changed. The effect appears to be associated with the diffusion of water molecules into or out of the material, the peaks being observed both when the sample is humidified (5%–85% RH) or subjected to drying. The results are supplemented by stress relaxation data obtained on similar specimens. Also in this case a higher relaxation rate is observed when the RH level around the sample is changed, the total stress decrease after several cycles being significantly larger than the corresponding value observed after the same period at the higher RH level.