Effect of temperature on activity and selectivity of carbon supported Mo sulfide in simultaneous hydrodenitrogenation of pyridine and hydrodesulfurization of thiophene

Activity and selectivity of carbon supported Mo catalyst was tested in parallel hydrodenitrogenation (HDN) of pyridine and hydrodesulfurization (HDS) of thiophene in the temperature range 260–350 °C at 2 MPa of hydrogen pressure and compared with that of commercial NiMo-alumina catalyst Shell 324. The main advantages of carbon supported Mo sulfide over commercial NiMo catalyst can be summarized as follows: the markedly higher HDN and better HDS activities normalized to moles of active metals, the lower content of piperidine in the reaction products and the distinctly better selectivity towards HDN reaction.     

Oxidative dimerisation of propene to 1,5-hexadiene on Bi-Zn-O catalysts

The oxidative dimerisation of propene to 1,5-hexadiene has been investigated on Bi-Zn-O catalysts. The Bi₄₈ZnO₇₃ phase, observed in the catalysts calcined at 700 ° C is an active and selective catalyst for the formation of 1,5-hexadiene. The best catalytic performance (1,5-hexadiene selectivity 64%) has been obtained at 525 ° C, with a propene to oxygen ratio of 26, on a catalyst formed by Bi₄₈ZnO₇₃ with a small excess of ZnO.     

Zur Bleichung pflanzlicher Öle II: Kinetik des Bleichprozesses

Bleaching of Vegetable Oils II.: Kinetics of the Bleaching Process The study deals with the kinetics of bleaching. The test-system used rapeseed oil with a low content of erucic acid and added bleaching earth Tonsil Optimum FF. By means of the results obtained an empiric equation was then developed describing the process taking part under the conditions studied.     

A 3D EFFECT IN THE WEDGE ADHESION TEST: APPLICATION OF SPECKLE INTERFEROMETRY

The wedge test is of considerable use for evaluating adhesion between two bonded rigid substrates. In its (usual) static form, release of elastic strain energy is equated to effective adhesion energy during crack growth. However, the test is usually treated as two-dimensional. In fact, it is really three-dimensional due to anticlastic bending effects of the bent beam(s) during crack propagation.

We studied a composite material/epoxy/aluminium alloy system and observed a curved crack front during propagation. This leads to doubt as to the value of crack length to be inserted in the adhesion energy formula. In addition, by using the highly sensitive technique of speckle interferometry, it was possible to study anticlastic bending effects in a quantitative manner. Far from the crack front, agreement between theory and experimental is good, yet work remains to be done to understand the zone near the fracture zone.     

Antibacterial poly{(4‐vinyl phenylboronic acid)‐co‐[2‐(dimethylamino)ethyl methacrylate]} copolymers and their application in water‐based paints

Herein, we report the synthesis of poly(4‐vinylphenylboronic acid) (PVPBA) and poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) homopolymers, copolymers, and their methyl, pentyl, and octyl quaternized forms as dopant in water‐based permanent antibacterial paints. Both quaternized and nonquaternized forms of P(VPBA‐co‐DMAEMA) copolymers have reflected higher MIC values relative to PDMAEMA homopolymers. High molecular weight copolymers were more active against Escherichia coli ATCC 25922, contrarily, lower molecular weight copolymers showed higher antibacterial activity against Staphylococcus aureus ATCC 25923. The paint films prepared with quaternized PDMAEMA homopolymers with a weight of 10% showed better antibacterial activity in water and airborne tests than the copolymers. However, it has been shown that the inadequate anti‐biofilm properties of homopolymer‐containing paint films are overcome with the VPBA content of the copolymer structure and the most effective antibacterial and anti‐biofilm properties have been obtained with paint films containing P(VPBA‐co‐5QDMAEMA) copolymers. These paint films, which can maintain antibacterial and anti‐biofilm properties for at least 1 year, have the potential to be an alternative to Ag/Cl based solid surfaces which require the active substance to be regenerated. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46245.     

Starting to Gel: How Arabidopsis Seed Coat Epidermal Cells Produce Specialized Secondary Cell Walls

For more than a decade, the Arabidopsis seed coat epidermis (SCE) has been used as a model system to study the synthesis, secretion and modification of cell wall polysaccharides, particularly pectin. Our detailed re-evaluation of available biochemical data highlights that Arabidopsis seed mucilage is more than just pectin. Typical secondary wall polymers such as xylans and heteromannans are also present in mucilage. Despite their low abundance, these components appear to play essential roles in controlling mucilage properties, and should be further investigated. We also provide a comprehensive community resource by re-assessing the mucilage phenotypes of almost 20 mutants using the same conditions. We conduct an in-depth functional evaluation of all the SCE genes described in the literature and propose a revised model for mucilage production. Further investigation of SCE cells will improve our understanding of plant cell walls.     

An antibacterial composite system based on multi-responsive microgels hosting monodisperse gold nanoparticles

A multi-responsive microgel having response to pH, temperature, and salt concentration was successfully prepared using a water-soluble monomer. Microgels were readily prepared from 2-(N-morpholino)ethyl methacrylate (MEMA) via emulsion polymerization using glycidyl methacrylate as a comonomer cross-linker. The morpholino groups of MEMA residues of microgels were able to give complexation with metal containing anions such as AuCl₄ ^? in acidic conditions. The reduction of aurate ions with sodium borohydride led to immobilized-gold nanoparticles (AuNP) in the microgel system. Average particle diameters of AuNPs were determined to be 10 ± 2 nm. The resulting AuNP-microgel system was examined as a nanoreactor for catalyst system and determined to be very effective in the reduction of 4-nitrophenol model reaction in aqueous media. AuNPs-microgel composite system had antibacterial properties against several Gram-positive and Gram-negative bacteria similar to amoxicillin. This P(MEMA-co-GMA) microgel is also very useful for different applications such as a host for metal nanoparticle production, a drug carrier or drug delivery system.     

Water‐soluble/dispersible carbazole‐containing random and block copolymers by nitroxide‐mediated radical polymerisation

A series of carbazole‐containing water‐dispersible poly(acrylic acid)‐b‐(9‐(4‐vinylbenzyl)‐9H‐carbazole) block copolymers (poly(AA)‐b‐poly(VBK)) and water‐soluble poly(methacrylic acid‐ran‐(9‐(4‐vinylbenzyl)‐9H‐carbazole)) (poly(MAA‐ran‐VBK)) random copolymers were synthesised in a controlled manner (i.e. low polydispersities $(\overline {M_{{\rm w}} } /\overline {M_{n} } < 1.3)$ by nitroxide‐mediated polymerisation (NMP) using an SG1‐based alkoxyamine initiator, BlocBuilder. Poly(AA)‐b‐poly(VBK) block copolymers were most easily accessed by using poly(AA) in its protected form as the macroinitiator for the 9‐(4‐vinylbenzyl)‐9H‐carbazole (VBK) block. Controlled polymerisation of MAA was accomplished using an excess of 10 mol.% SG1 relative to BlocBuilder with VBK as controlling co‐monomer (initial molar feed content f_VBK,0 = 0.03–0.20) in dimethylformamide at 80°C. Poly(MAA‐ran‐VBK) copolymers with a final VBK molar composition of F_VBK < 0.30 resulted in water‐soluble copolymers. In addition, as macroinitiators, poly(MAA‐ran‐VBK)s were sufficiently pseudo‐living to reinitiate a second batch of monomer (90 mol.% methyl methacrylate with styrene) in organic solvent and by ab initio, surfactant‐free emulsion polymerisation. In both cases, low polydispersity, amphiphilic block copolymers resulted $(\overline {M_{{\rm w}} } /\overline {M_{{\rm n}} } < 1.3)$ . © 2012 Canadian Society for Chemical Engineering     

A 3D EFFECT IN THE WEDGE ADHESION TEST: APPLICATION OF SPECKLE INTERFEROMETRY

The wedge test is of considerable use for evaluating adhesion between two bonded rigid substrates. In its (usual) static form, release of elastic strain energy is equated to effective adhesion energy during crack growth. However, the test is usually treated as two-dimensional. In fact, it is really three-dimensional due to anticlastic bending effects of the bent beam(s) during crack propagation.

We studied a composite material/epoxy/aluminium alloy system and observed a curved crack front during propagation. This leads to doubt as to the value of crack length to be inserted in the adhesion energy formula. In addition, by using the highly sensitive technique of speckle interferometry, it was possible to study anticlastic bending effects in a quantitative manner. Far from the crack front, agreement between theory and experimental is good, yet work remains to be done to understand the zone near the fracture zone.