关于空调水系统节能的探讨

以空调冷冻水系统的节能为例 ,探讨空调系统节能的途径、存在的问题及解决办法     

地域通信网的干扰技术研究

本文在分析地域通信网结构及组成的基础上,研究了对地域通信网实施的节点破坏、末端信息封锁、局部阻塞瘫痪等对抗方法,并使用干扰地域通信网的程度、节点干扰率、末端节点封锁率和传递信息误差率等指标对干扰效果进行评估。     

ANALYSIS AND PROCESSING OF LMF－COSTAS STEPPED FREQUENCY RADAR SIGNAL

Linear Modulated Frequency (LMF) Costas Stepped Frequency Radar (SFR) signal is introduced. Its ambiguity function is derived and analyzed in detail and its feasibility is validated in theory. The scheme of the proposed signal processing is also presented. The results of theoretic analysis and simulation show that, by using the proposed signal and increasing the bandwidth of the total stepped frequency, the ambiguity sidelobe is well suppressed and the range-velocity coupling in the stepped frequency radar is also greatly weakened.     

Fuzzy estimation of feed-cutting force from current measurement-a case study on intelligent tool wear condition monitoring

It is very important to use a reliable and inexpensive sensor to obtain useful information about manufacturing processing, such as cutting force for monitoring automated machining. In this paper, the feed-cutting force is estimated using inexpensive current sensors installed on the ac servomotor of a computerized numerical control (CNC) turning center, with the results applied to the intelligent tool wear monitoring system. The mathematical model is used to disclose the implicit dependency of feed-cutting force on feed-motor current and feed speed. Afterwards, a neuro-fuzzy network is used to identify the cutting force with current measurement only. This hybrid math-fuzzy approach will reduce the modeling uncertainty and measurement cost. Finally, the estimated cutting force is applied in the tool-wear monitoring process. Successful experiments demonstrate robustness and effectiveness of the suggested method in the wide range of tool-wear monitoring applications.     

榆林气田气井废弃条件的确定

榆林气田是典型的低渗透气田，要准确计算其采收率和可采储量，必需确定气井的废弃条件。传统方法对气井的废弃地层压力进行计算时，由于忽视了开发过程中产能方程的变化，造成计算结果存在一定的误差。根据气井废弃地层压力的相关理论和计算方法，考虑了对气井产能方程影响较大的参数的变化，结合榆林气田气井矿场实际，推导出了适合榆林气田计算气井任意时刻二项式方程系数的公式，进而得到气井废弃时的稳定二项式方程。根据垂直管流法计算得到废弃井底流压，从而得到可靠的气井废弃地层压力，再结合经济评价即可确定气井的废弃产量。实例计算表明，新方法实用、有效，更切合气田实际。     

高酸Purex流程镎走向控制及其回收纯化工艺研究

文章介绍用逆流萃取串级实验方法研究高酸Purex萃取流程lA萃取器镎走向控制(与铀、钚共萃取)及自lAP中定量反萃镎、分离铀、钚工艺条件的实验结果。     

A Two-Level Spreading-despreading CDMA System and Its Performance Evaluation

1　IntroductionHowtosuppresstheinterferenceintheCDMAsystems,includingtheSelfInterference(SI) ,Mul tipleAccessInterference(MAI)andtheAdjacentCellInterference(ACI) ,isthekeypointinimprov ingthesystemperformanceandcapacity .Insteadofthecomplicatedspecializedsignalprocessingtech niquesusedbefore[1～ 4] ,spreadingsequenceswithgoodcorrelationpropertiescanimprovethesystemperformanceradically[5] .InRef.[6～ 9],theconceptofZeroCorrelationZone (ZCZ) ,whichisequivalenttothegeneralizedothogonal…     

工程制图精品课程建设的探索与实践

论述了为培养高素质人才,全面提升高等教育教学质量,必须积极推进和实施工程制图精品课程建设及其建设目标。从加强师资队伍建设、教学内容与课程体系、教学方法与手段、教材与教学资源、实践教学、教学效果等方面探索了工程制图的教学改革和课程建设实践。总结了制图精品课程建设的特色和所取得的成果,并提出了进一步应探讨和研究的一些问题。     

锰锌铁氧体纳米粉体的液相制备及磁性能

以δ-FeOOH为前驱体,用氨水调节溶液的pH值,分别采用(1)90℃水浴加热动态转化、(2)沸腾回流动态转化,(3)90℃静态转化及(4)200℃水热法四种方法合成了锰锌铁氧体纳米粉体.采用X射线衍射仪(XRD),透射电子显微镜(TEM)、振动样品磁强计(VSM)和X射线荧光光谱仪(XRF)等方法对粉体进行了表征,对四种液相法制备的锰锌铁氧体纳米粉体的结构和性能等进行了对比和分析.结果表明,四种方法中沸腾回流相转化法得到的产物具有磁性能较好、形状较规则、粒径可控等优点.