基于组件的空间信息管理系统及典型应用案例

基于组件式地理信息系统(GIS)技术设计了空间信息管理系统的架构,作为典型应用案例,开发了基于组件的农业空间信息管理系统,验证了提出的通用架构的可用性和合理性,并详细分析了系统开发过程中的关键技术问题及其解决方法,主要包括多源空间数据集成、空间数据安全管理、Web GIS实现方法等.     

Liquid-Gas Two-Phase Flow Simulation in Mold Filling Process with Level Set Method

Air entrapped in liquid metal during the mold filling process seriously affects the casting quality, thus it is important to track its behavior in the mold cavity. A liquid-gas two-phase flow model is developed to describe the mold filling process and predict the air entrapment defect. The model is based on the combination of SOLA and Level Set Method. The pressure and velocity fields are calculated by SOLA,and the interface movement is simulated by Level Set method as the most common interface tracking met...     

安全防范监控系统的设计

文中分析了组建地震局研究所的安全监控系统的可行性主要有网络资源、硬件资源和软件资源三个方面,然后分析了监控系统的网络拓扑结构,最后分析了监控系统的软硬件设计,在硬件设计方面重点在于串口通信的过程,而软件设计方面重点在于系统后台功能的设计.     

一种基于混合模式的密码协议入侵检测方法

本文结合特征入侵检测和异常入侵检测技术,提出了一种在密码协议运行中,能动态监视安全协议运行,实时检测其上攻击的方法,详细介绍了该方法的工作原理,并通过实例验证了此方法的可行性.     

扭曲的涡旋光束在海洋湍流中的传输因子

基于扩展惠更斯-菲涅尔原理和维格纳分布函数(Wigner distribution function,WDF)二阶矩,推导了部分相干扭曲涡旋光束(partially coherent twisted vortex beam,PCTVB)在海洋湍流中传输时的M2因子和角扩展θ(z)。通过数值模拟方法详细研究了海洋湍流对光束M2因子和角扩展θ(z)的影响,结果表明温度方差耗散率ΧT和温度盐度贡献比w越大、动能耗散率ε和各向异性因子ξ越小时对PCTVB的M2因子和角扩展θ(z)的影响越大。此外研究发现,相较于非扭曲涡旋光束(PCVB),PCTVB有更好的抗海洋湍流的能力,且增大拓扑荷数m以及扭曲因子绝对值｜μ｜后,PCTVB的M2因子和角扩展θ(z)显著减小,光束的抗海洋湍流能力增强。并且增大束腰宽度w0和波长λ,以及减小初始相干长度δηη(η=x,y)同样可以增加光束抗海洋湍流的能力。本文的数值研究结果对海洋光通信具有重要意义。     

基于Attention-CGRU网络的中文语音情感识别

正确识别语音中包含的情感信息可以大幅提高人机交互的效率.目前,语音情感识别系统主要由语音特征抽取和语音特征分类两步组成.为了提高语音情感识别准确率,选用语谱图而非传统声学特征作为模型输入,采用基于attention机制的CGRU网络提取语谱图中包含的频域信息和时域信息.实验结果表明:在模型中引入注意力机制有利于减少冗余信息的干扰,并且相较于基于LSTM网络的模型,采用GRU网络的模型预测精确度更高,且在训练时收敛更快,与基于LSTM的基线模型相比,基于GRU网络的模型训练时长只有前者的60%.     

ADS-B延迟转发电文检测及干扰台定位方法

广播式自动相关监视(ADS-B)技术因明码广播特点,面临较严重的电子欺骗风险.针对延迟转发电文的检测与相应干扰台定位问题,根据ADS-B地面站接收电文的位置间隔的分布特点,该文提出利用顺序电文间瞬时速度与关注期内平均速度间的差异性检测延迟转发电文的方法.根据延迟转发电文的原始电文位置与干扰台间的空间关系,利用ADS-B地面站获取的延迟转发电文位置及时间戳,采用多点定位技术实现对干扰台定位.仿真结果表明,利用瞬时速度与平均速度间的差异性可以有效地实现对延迟转发电文存在与否的检测,干扰台的定位精度与ADS-B地面站的定时精度、采用定位的电文数目、干扰台与航线间距离和干扰台方位等因素有关,且采用正视区域的位置电文可以获得对干扰台较好的定位性能.该文方法可以使ADS-B地面站独立地检测延迟转发干扰和定位相应干扰台.     

Long-term ultra-precision phase synchronization technique for locking the repetition rate of OFCs based on FLOM-PD

Long-term ultra-precision synchronization between optical frequency combs (OFCs) and microwave oscillators is important for various fields, including scientific observation, smart grid, positioning and navigation, etc. Here, a phase-locked loop system based on fiber loop optical-microwave phase detector (FLOM-PD) is proposed to realize the synchronization of the repetition rate of OFCs and rubidium atomic clocks. Firstly, the scheme and locking process of the system are elaborated, then the mathematical model of the system is established, and the feasibility of the scheme is proved by theoretical analysis and experimental verification. After synchronization, the instability of the system reaches 8.69×10-12 at 1 s and 2.94×10-13 at 1 000 s, indicating that the phase synchronization system can achieve ultra-precision and stability of OFCs repetition rate.     

Crack width estimate in reinforced concrete with FBG sensor:experimental and numerical analysis

A detecting method of investigating the function of crack width versus fiber Bragg grating (FBG) spectrum deformation was proposed. In this paper, the bond-slip model of deformed steel bar in concrete slab was used to calculate the crack width. The stress distributions along optic-fiber grating were extracted by the three-dimensional (3D) finite element method (FEM) and the spectrum deformation of FBG induced by the uneven distribution of the stress was calculated. Experiments were carried out with an FBG fixed on the bottom of concrete slab. The crack width and FBG spectrum deformation of experimental results were given, and the function of crack width versus wavelength shift of FBG sensor was given also. The proposed technology in this paper could improve the safety of large-scale concrete building by early identification of structural crack.     

一种增强型PTP光纤级联精细时频同步方法

该文提出了一种增强型PTP光纤级联精细时频同步方法,该方法以PTP同步技术为基础,结合同步以太网时钟传递技术和基于数字双混频时差法的多级级联精细时钟同步技术,对PTP技术进行改进和增强,然后基于该方法,通过多级时频设备光纤级联的形式实现多节点、大跨度、网络化的时频信号传递与同步输出,并解决多级级联情况下同步精度会逐级恶化的问题,实现ns量级的系统时间同步精度,保证系统各环节在高度统一的时间尺度下进行高效同步与联动工作。通过设计、试验,验证了该方法的可行性和有效性。