Measurement and modeling of the sidewall threshold voltage ofmesa-isolated SOI MOSFETs

Five-terminal silicon-on-insulator (SOI) MOSFETs have been characterized to determine the threshold voltage at the front, back, and sidewall as a function of the body bias. The threshold voltage shift with the body bias at the front and back interfaces can be explained by the standard bulk body effect equation. However, the threshold voltage shift at the sidewall is smaller than predicted by this equation and saturates at large body biases. This anomalous behavior is explained by two-dimensional charge sharing between the sidewall and the front and back interfaces. An analytical model that accounts for this charge sharing by a simple trapezoidal approximation of the depletion regions and correctly predicts the sidewall threshold voltage shift and its saturation is discussed. The model makes it possible to measure the sidewall threshold even when it is larger than the front threshold voltage     

情浸丹青写名园——小谈郝永明的古建园林绘画艺术

郝永明古建园林绘画作品另辟蹊径，难能可贵。郝永明的画，不仅给我国美术宝库增加了一份积累，也给古建园林艺术增添了珍贵的资料。     

FE Simulation for Internal Inversion of Aluminium Alloy Tube

1 Introduction A double-walled invertube is difficult to fabricate other than applying inversion process. Such kind of invertube can be used as impact energy absorbing element in transport vehicles, like aircrafts and automobiles. Reddy T Y[1] did the analysis of Internal inversion and calculated the inversion load. Reid[2] et al. examined nosing and internal inversion of cold drawn steel tube by the finite element package ABAQUS. Recently, Rosa P A[3] et al. investigated Internal invers…     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

60m高度处单片露天超高混凝土悬臂墙的设计与施工

通过采用竖向预应力技术 ,解决了 60m高度处单片 8m高悬臂钢筋混凝土墙根部裂缝宽度超过规范限值的问题 ;采用将预应力钢绞线顶端锚固于墙高中段等结构和施工措施 ,控制墙体长细比不超过 3 0 ,减少了由于长细比过大对墙体承载力的不利影响     

下消化道出血DSA诊断及栓塞结合小剂量垂体后叶素灌注治疗

目的探讨不明原因下消化道出血的DSA诊断及介入栓塞治疗的临床应用价值.方法对32例不明原因下消化道出血患者行DSA检查,通过显示造影剂外溢、病理血管和肿瘤染色来确定出血原因及部位,对出血处行超选择性动脉栓塞治疗和留置导管灌注小剂量垂体后叶素维持12 h止血治疗.结果DSA诊断阳性率75%(24/32),其中肠伤寒2例,肠结核1例,血管性病变14例,肿瘤7例.阳性者介入手术成功20例,手术成功率83.3%,无一例严重并发症.结论DSA检查和介入治疗对诊断不明确或保守治疗无效的下消化道出血有着重要的诊断及治疗     

洪水预报调度决策系统在抗击台风中的作用

洪水预报调度决策系统近年来在全国各地得到广泛的应用。简单介绍了洪水预报系统的系统组成及功能,分析了系统在抗击台风过程中的作用与效益,总结了系统多年的运行和维护经验。根据多年的运行经验,系统能及时提供雨、水情数据和高效的调度会商决策,提高防御台风、突发性暴雨等自然灾害的能力。     

阳离子化多元醇防塌剂的研制

室内研究和现场应用表明,聚乙烯醇类防塌剂表现出较明显的增粘负效应,可引起钻井液粘度的急剧增加,严重影响其推广应用.通过金属盐催化降解和阳离子化反应,研制出了抑制性好且增粘负效应低的阳离子化改性多元醇防塌剂.考察了阳离子化试剂、反应温度、反应时间对取代度、反应效率和产品主要性能的影响,得出了阳离子化多元醇防塌剂最佳制备条件,即：PVA与阳离子化试剂物质的量比为1：1,反应温度为50℃,反应时间为4 h,阳离子度可达0.435.     

新浦江城规划设计优劣分析

文章通过对上海“新浦江城”首期项目的介绍，分析了意大利设计在该项目应用中的独特之处，同时指出了存在的一些问题。指出国外设计应结合中国国情，符合社会发展的需要。     

花艺教室：荆丛亦风流

运动的环热烈的爱//圆点示爱//纯洁爱情//心心相印//透过玻璃的美