A multi-institutional study confirms the presence and expression of simian virus 40 in human malignant mesotheliomas

Exposure to the carcinogen asbestos is a major factor in the development of malignant mesothelioma. However, not all mesotheliomas are associated with asbestos exposure, and only a small minority of people exposed to asbestos develop mesothelioma. Therefore, the identification of the cofactors that render certain individuals more susceptible to asbestos or that cause mesothelioma in people not exposed to asbestos has been a major priority of the International Mesothelioma Interest Group. The possible association of SV40 with mesothelioma was recently discussed in a special session at the Fourth International Mesothelioma Interest Group Conference, and it was decided to conduct a multi-institutional study to independently verify the presence of this tumor virus in mesotheliomas. We report the results of this investigation: (a) DNA and protein analyses revealed SV40 sequences and SV40 large T antigen expression in 10 of 12 mesotheliomas tested (83%); and (b) electron microscopy demonstrated variable amounts of asbestos fibers in 5 (71%) of 7 corresponding lung tissues available for analysis. Our results demonstrate that SV40 DNA is frequently present and expressed in mesotheliomas in the United States. Because our data demonstrate that some patients test positive for both SV40 and asbestos, the possibility that these two carcinogens interact should be investigated in future studies.     

Synthesis and characterization of catalysts produced from paper mill sludge. I. Determination Of NOx removal capability

Characteristics and catalytic properties of a series of carbon-based catalysts (CBCs) produced from paper mill sludge were evaluated. The major processes involved in the production of the catalysts were chemical activation, impregnation, pyrolysis, and post pyrolysis rinsing. The porous structure, catalytic activity and thermostability of the catalysts were tailored during the production stage by introducing hetero-atoms (zinc chloride, and ferric nitrate) in the carbon structure. Characterization of the produced CBCs included determination of the surface area, pore size, and pore size distribution (PSD) from standard N₂-adsorption isotherm data. The extent of graphitization and the presence of metal crystals were identified from X-ray diffraction (XRD). The limit of the catalyst gasification was estimated from thermogravimetric analysis (TGA) conducted in an oxidized environment. The NO_x reduction capability of the produced catalysts was evaluated in the presence of carbon monoxide using a fixed bed reactor. The reaction temperature ranged from 300 to 500°C. It was shown that paper mill sludge is an excellent precursor for the production of CBCs with NO_x removal capability of 66–94%. The catalytic capability of the produced CBCs varied according to the method of production, catalyst surface properties (surface area, pore structure, PSD), metal composition and reaction temperature. The highest NO_x removal capacity was observed for the catalytic reactions carried out at 400°C. The mesoporous catalyst produced with a Zn:Fe molar ratio of 1:0.5 exhibited the maximum NO_x removal catalytic activity of 94%.     

The influence of baking fuel on residues of polycyclic aromatic hydrocarbons and heavy metals in bread

The influence of fuel type used to bake bread on the spectrum and concentrations of some polycyclic aromatic hydrocarbons and heavy metals in baked bread was assessed. Bread samples were collected from different bakeries operated by either electricity, solar, mazot or solid waste and their residue content of PAHs and heavy metals was assessed. The total concentration of PAHs detected in mazot, solar, solid waste and electricity operated bakeries had an average of 320.6, 158.4, 317.3 and 25.5 μg kg⁻¹, respectively. Samples collected from mazot, solar and solid waste operated bakeries have had a wide spectrum of PAHs, in comparison to that detected in bread samples collected from electricity operated bakeries. Lead had the highest concentrations in the four group of bread samples, followed by nickel, while the concentrations of zinc and cadmium were the least. The concentration of lead detected in bread samples produced from mazot, solar, solid waste and electricity fueled bakeries were 1375.5, 1114, 1234, and 257.3 μg kg⁻¹, respectively. Estimated daily intake of PAHs based on bread consumption were 48.2, 28.5, 80.1, and 4.8 μg per person per day for bread produced in bakeries using mazot, solar, solid waste and electricity, respectively. Meanwhile, the estimated daily intake of benzo (a) pyrene were 3.69, 2.65, 8.1, and 0.81 μg per person per day for bread sample baked with mazot, solar, solid waste and electricity, respectively. The daily intake of lead, based on bread consumption was 291, 200.5, 222, and 46.31 μg per person per day for bread sample baked with mazot, solar, solid waste and electricity, respectively. The present work has indicated the comparatively high level of daily intake of benzo (a) pyrene and lead in comparison to levels reported from many other countries and those recommended by international regulatory bodies. It is probable that residues detected in bread samples are partially cereal-borne but there is strong evidence that the process of baking and the gases emitted are responsible for most of the contamination load.     

Performance enhancement of batch aerobic digesters via addition of digested sludge

The impact of the feed sludge (FS) concentration and addition of digested sludge (DS) to an aerobic digester was evaluated with respect to its capability for removal of the total suspended solids (TSS) and volatile suspended solids (VSS). The aerobic digesters, which operated in a batch mode at constant temperature and mixing rate, were initially filled with FS to 25%, 50%, 75%, and 100% of the reactor's volume. The remaining volume of the reactor was occupied by the DS, having DS/FS ratio of 3, 1, 1/3, and 0. Analysis of the experimental data showed that in the absence of DS, TSS, and VSS destruction rates are very small; however, increasing DS/FS ratio from 1/3 to 3 results in 74-77% increase in VSS and TSS destruction, respectively. The increase of the DS/FS ratio associated with increased ratio of the measured viable biomass (Cc) to VSS concentration (Xv) suggested that DS serves as the source of viable cell mass needed for degradation of organic solids. Assuming pseudo-first-order kinetics, it was shown that while organic solid destruction rate constants (k) are inversely related to initial concentrations of sludge, their values increase with increasing DS/FS ratios.     

Cyclic preference scheduling of nurses using a Lagrangian-based heuristic

This paper addresses the problem of developing cyclic schedules for nurses while taking into account the quality of individual rosters. In this context, quality is gauged by the absence of certain undesirable shift patterns. The problem is formulated as an integer program (IP) and then decomposed using Lagrangian relaxation. Two approaches were explored, the first based on the relaxation of the preference constraints and the second based on the relaxation of the demand constraints. A theoretical examination of the first approach indicated that it was not likely to yield good bounds. The second approach showed more promise and was subsequently used to develop a solution methodology that combined subgradient optimization, the bundle method, heuristics, and variable fixing. After the Lagrangian dual problem was solved, though, there was no obvious way to perform branch and bound when a duality gap existed between the lower bound and the best objective function value provided by an IP-based feasibility heuristic. This led to the introduction of a variable fixing scheme to speed convergence. The full algorithm was tested on data provided by a medium-size U.S. hospital. Computational results showed that in most cases, problem instances with up to 100 nurses and 20 rotational profiles could be solved to near-optimality in less than 20 min.     

A Finite Volumes-Based 3-D Low Dispersion FDTD Algorithm

An algorithm extension to three dimensions is developed and presented for the highly phase-coherent modified second-order in time, fourth-order in space (or M24) finite-difference time-domain (FDTD) algorithm. A finite-volumes approach in conjunction with Yee's standard FDTD lattice is used for algorithm development. The corresponding dispersion relation is also developed, analyzed and compared to both the standard second-order and fourth-order FDTD algorithms as well as to two closely related high-order phase-coherent algorithms. Wideband algorithm attributes are also presented as well as sets of ready to use optimized algorithm coefficients.     

Numerical analysis of plastic deformation of a circular sheet metal subjected to transverse impact loading

Based on the concept of Tensor Code a numerical method is presented for analysis of the plastic deformation process of circular sheet metals subjected to transverse impact loading. In the solution process, the equation of motion is solved explicitly with finite difference method in a series of small time steps over a Lagrangian mesh of zones. Using this method, a code has been developed and utilized for investigation of the deformation behavior of an explosively loaded circular sheet metal under various conditions. Deformation characteristics of a sheet under rectangular and triangular pressure distributions are discussed. It is shown that when these simple distributions are combined with each other, their individual effects on the deformation behavior are also combined in the deformation process. Effects of shape and duration of pressure pulse as well as boundary conditions have been explored. Moreover, results of the numerical simulation have been compared with those of theoretical solution and experiments reported by other researchers. Good agreements between them show the validity of the developed code.     

Evanescent-coupled GaInNAsSb in-line fibre photodetectors

The authors report on in-line fibre photodetectors that can measure power transfer in an optical fibre without interruption of the optical beam, showing 80% external quantum efficiency at 1316 nm wavelength. A new type of structure is used that employs GaNAsSb barriers and GalnNAsSb quantum wells grown by molecular beam epitaxy on GaAs substrates at the centre of anti-resonant reflective optical waveguides to detect long wavelength optical signals without fibre interruption.