基于DSP+CPLD的高精度信号发生器

介绍了基于直接数字式频率合成(DDS)原理的全数字信号发生器(DSP),利用DSP芯片快速、高精度的运算优势以及CPLD芯片灵活的编程逻辑、大容量存储功能的特点,采用通用可编程芯片以及数字波形合成技术,形成高稳定、高精度、高动态的数字合成信号.该信号发生器可产生0～25 kHz的正弦波、三角波和方波,输出电压峰峰值为0～5 V,频率步进1 Hz,幅度步进0.001 V.     

Study and design of step-index channel waveguide bends withlarge-angle and low-loss characteristics

By using micro-prisms, improved three-dimensional (3-D) bends of the embedded and buried waveguides of step-index profile are proposed. A simple phase compensation rule for the optimal design of the micro-prism is also presented. Through the simulation of 3-D semivectorial finite-difference beam propagation method, the transmission characteristics of the improved bends are shown to have been enhanced dramatically as compared with those of the conventional ones. Even for a bend angle of as large as 10°, the normalized transmitted power can still be greater than 95%. These results of 3-D bends are then compared with those of the two-dimensional (2-D) ones which are simplified from 3-D structures by the effective index method, and physical explanation of the discrepancy between the 3-D and 2-D results is introduced. The influences of waveguide structures and prism parameters on the transmission characteristics are discussed in detail. Some criteria for the design of large-angle low-loss 3-D improved bends are also accessed     

一种产生式系统的并行推理模型

1.引言 在人工智能领域中,产生式系统是一种比较有效的知识表示方法,并得到了广泛应用。目前许多较为成功的专家系统都是用产生式系统实现的~[1]。随着应用领域的不断扩士其知识座的抓橄称渐增     

Performance model of interactive video-on-demand systems

An interactive video-on-demand (VoD) system allows users to access video services, such as movies, electronic encyclopedia, interactive games, and educational videos from video servers on a broadband network. This paper develops a performance evaluation tool for the system design. In particular, a user activity model is developed to describe the usage of system resources, i.e., network bandwidth and video server usage, by a user as it interacts with the service. In addition, we allow batching of user requests, and the effect of such batching is captured in a batching model. Our proposed queueing model integrates both the user activity and the batching model. This model can be used to determine the requirements of network bandwidth and video server and, hence, the trade-off in communication and storage costs for different system resource configurations     

A BiCMOS dynamic carry lookahead adder circuit for VLSIimplementation of high-speed arithmetic unit

A BiCMOS dynamic carry lookahead circuit that is free from race problems is presented. A 16 b full-adder test circuit, which has been designed based on a 2 μm BiCMOS technology, shows a more than five times improvement in speed as compared to the CMOS Manchester carry lookahead (MCLA) circuit. The speed advantage of the BiCMOS dynamic carry lookahead circuit is even greater in a 32- or 64-b adder     

中国的三种非同步轨道卫星移动通信系统星座方案

本文介绍基于我国的三种非同步轨道卫星移动通信系统星座方案：低、中轨系统各有２４和１８颗星，轨道高度分别为１３２６和８０３５ｋｍ，两系统各以５°和３０°的仰角对我国的覆盖率为９９．７８％和９９．９６％；椭圆轨道系统１２颗星，近、远地点分别为４２７和２９０６ｋｍ，以７°和１５°仰角对我国北纬２０°以上地区覆盖率分别为９７．９０％和８９．６１％，若增加４颗中轨卫星，以１５°仰角对我国的覆盖率为９９．９９％。     

The relation between luminous properties and oxygen content inZnS:TbOF thin-film electroluminescent devices fabricated byradio-frequency magnetron sputtering method

The purpose of this paper is to study the relationship between the oxygen concentration and brightness degradation in ZnS:TbOF green thin-film electroluminescent (EL) devices. The characteristics including crystallinity, optical, and electrical properties were discussed. The brightness-voltage (B-V) measurement results shelved that with higher oxygen-content in ZnS:TbOF phosphor layer, lower brightness was measured. It was consistent with the poor crystallinity, worse photoluminescent intensity, and easier to get moisture in the oxygen-rich (O/Tb>1) phosphor film. Furthermore, deep level transient spectroscopy (DLTS) measurements identified that when the O/Tb ratio was greater than 1, the oxygen-related deep hole traps E_H1 and/or E_H2 could be detected in the ZnS:TbOF phosphor layer. These E _H1 and/or E_H2 traps were believed to be the main killers for the brightness of the device since they capture most of the holes from the generated electron-hole pairs. This evidence strongly supports that the modified energy transfer model is more dominant than direct impact excitation during the luminescent process     

二阶A型Cooper变换的增强型

对二阶Ａ型Ｃｏｏｐｅｒ变换进行增强，放宽可用性条件，并证明了其正确性，最后举例说明其应用。     

Mass transfer kinetics of neodymium(III) extraction by calix[4]arene carboxylic acid using a constant interfacial area cell with laminar flow

BACKGROUND: Thermodynamics and kinetics data are both important to explain the extraction property. In order to develop a novel separation technology superior to current extraction systems, many promising extractants have been developed including calixarene carboxylic acids. The extraction thermodynamics behavior of calix[4]arene carboxylic acids has been reported extensively. In this study, the mass transfer kinetics of neodymium(III) and the interfacial behavior of calix[4]arene carboxylic acid were investigated. RESULTS: The rate constant (K_ao) becomes constant when the stirring speed was controlled between 250 rpm and 400 rpm. The activation energy (E_a) was calculated to be 21·41 kJ mol^?1 or 88·17 kJ mol^?1 (dependent on temperature) from the slope of log K_ao against 1000/T. The linear relationship between the specific area and the extraction rate is the characteristic of an interfacial reaction control. The minimum bulk concentration of the extractant necessary to saturate the interface (C_min) is lower than 4·19 × 10^?4 mol L^?1. CONCLUSION: The effect of stirring speed, temperature, and species concentration on the extraction rate demonstrates that the extraction regime depends on the extraction conditions. The chemical reaction control governs the extraction regime at temperatures below 303 K and a mixed control regime occurs when the temperature is between 303 K and 318 K. The probable locale for the chemical reaction is at the liquid–liquid interface and the rate equation is deduced to be: ? d[Nd³⁺]_(a)/dt = k_f[Nd³⁺]_(a)[H₄A]_(o)^0·727[H⁺]_(a)^?0·978. The rate‐controlling step was suggested by the analysis of the experimental results. Copyright © 2008 Society of Chemical Industry