A new and accurate fault location algorithm for combined transmission lines using Adaptive Network-Based Fuzzy Inference System

This paper presents a new and accurate algorithm for locating faults in a combined overhead transmission line with underground power cable using Adaptive Network-Based Fuzzy Inference System (ANFIS). The proposed method uses 10 ANFIS networks and consists of 3 stages, including fault type classification, faulty section detection and exact fault location. In the first part, an ANFIS is used to determine the fault type, applying four inputs, i.e., fundamental component of three phase currents and zero sequence current. Another ANFIS network is used to detect the faulty section, whether the fault is on the overhead line or on the underground cable. Other eight ANFIS networks are utilized to pinpoint the faults (two for each fault type). Four inputs, i.e., the dc component of the current, fundamental frequency of the voltage and current and the angle between them, are used to train the neuro-fuzzy inference systems in order to accurately locate the faults on each part of the combined line. The proposed method is evaluated under different fault conditions such as different fault locations, different fault inception angles and different fault resistances. Simulation results confirm that the proposed method can be used as an efficient means for accurate fault location on the combined transmission lines.     

Activation detection in fMRI using a maximum energy ratio statistic obtained by adaptive spatial filtering

An adaptive spatial filtering method is proposed that takes into account contextual information in fMRI activation detection. This filter replaces the time series of each voxel with a weighted average of time series of a small neighborhood around it. The filter coefficients at each voxel are derived so as to maximize a test statistic designed to indicate the presence of activation. This statistic is the ratio of the energy of the filtered time series in a signal subspace to the energy of the residuals. It is shown that the filter coefficients and the maximum energy ratio can be found through a generalized eigenproblem. This approach equates the filter coefficients to the elements of an eigenvector corresponding to the largest eigenvalue of a specific matrix, while the largest eigenvalue itself becomes the maximum energy ratio that can be used as a statistic for detecting activation. The distribution of this statistic under the null hypothesis is derived by a nonparametric permutation technique in the wavelet domain. Also, in this paper we introduce a new set of basis vectors that define the signal subspace. The space spanned by these basis vectors covers a wide range of possible hemodynamic response functions (HRF) and is applicable to both event related and block design fMRI signal analysis. This approach circumvents the need for a priori assumptions about the exact shape of the HRF. Resting-state experimental fMRI data were used to assess the specificity of the method, showing that the actual false-alarm rate of the proposed method is equal or less than its expected value. Analysis of simulated data and motor task fMRI datasets from six volunteers using the method proposed here showed an improved sensitivity as compared to a conventional test with a similar statistic applied to spatially smoothed data.     

Quality-aware images.

We propose the concept of quality-aware image, in which certain extracted features of the original (high-quality) image are embedded into the image data as invisible hidden messages. When a distorted version of such an image is received, users can decode the hidden messages and use them to provide an objective measure of the quality of the distorted image. To demonstrate the idea, we build a practical quality-aware image encoding, decoding and quality analysis system, which employs: 1) a novel reduced-reference image quality assessment algorithm based on a statistical model of natural images and 2) a previously developed quantization watermarking-based data hiding technique in the wavelet transform domain.     

A Full Connectable and High Scalable Key Pre-distribution Scheme Based on Combinatorial Designs for Resource-Constrained Devices in IoT Network

Considering the internet of things (IoT), end nodes such as wireless sensor network, RFID and embedded systems are used in many applications. These end nodes are known as resource-constrained devices in the IoT network. These devices have limitations such as computing and communication power, memory capacity and power. Key pre-distribution schemes (KPSs) have been introduced as a lightweight solution to key distribution in these devices. Key pre-distribution is a special type of key agreement that aims to select keys called session keys in order to establish secure communication between devices. One of these design types is the using of combinatorial designs in key pre-distribution, which is a deterministic scheme in key pre-distribution and has been considered in recent years. In this paper, by introducing a key pre-distribution scheme of this type, we stated that the model introduced in the two benchmarks of KPSs comparability had full connectivity and scalability among the designs introduced in recent years. Also, in recent years, among the combinatorial design-based key pre-distribution schemes, in order to increase resiliency as another criterion for comparing KPSs, attempts were made to include changes in combinatorial designs or they combine them with random key pre-distribution schemes and hybrid schemes were introduced that would significantly reduce the design connectivity. In this paper, using theoretical analysis and maintaining full connectivity, we showed that the strength of the proposed design was better than the similar designs while maintaining higher scalability.

     

A 2-V, 1-10 GHz BiCMOS transceiver chip for multimode wirelesscommunications networks

This paper concerns the design consideration, fabrication process, and performance results for an ultra-broadband, low-voltage, low-power, BiCMOS-based transceiver chip for cellular-satellite-LAN wireless communication networks. The transceiver chip incorporates an RF amplifier, a Gilbert down-mixer, and an IF amplifier in the receive path, and an IF amplifier, a Gilbert up-mixer, and an RF amplifier in the transmit path. For an RF frequency in the 1-10 GHz band and an IF frequency in the 100-1000 MHz band, the developed transceiver chip consumes less than 60 mW at 2 V, to yield a downconversion gain of 40 dB at 1 GHz and 10 dB at 10 GHz and an upconversion gain of 42 dB at 1 GHz and 11 dB at 10 GHz. To avoid possible start-up problems caused during “stand-by” to “enable” mode transition, a simple switching technique is employed for enabling either the receive or the transmit path, by changing the value of a reference voltage applied to both the down- and the up-mixers. While the developed transceiver chip exhibits the best performance for a dc supply voltage of 2 V, it shows a graceful degradation for a ±0.15 V voltage deviation. The transceiver's chip size is 1.04 mm×1.04 mm     

A novel algorithm to study the impact of the mismatch on analog building blocks: a case study in basic 35 nm CMOS amplifiers

In this paper, the context of modeling of the impact of mismatch and statistical variations on analogue circuit building blocks is emphasized. The aim is to develop a new algorithm which predicts the statistical behavior of important parameters of an amplifier including output resistance, voltage gain and trans-conductance. The relative error of standard deviation of statistical parameters will remain less than 5% compared with the most accurate Monte-Carlo (MC) simulations using atomistic library model-cards. In comparison with other models which are based on the normal distribution of parameters, the proposed model does not need this limiting presumption. On the other hand, the proposed algorithm is more efficient compared with time consuming MC atomistic simulations.     

Wireless Brain Computer Interface for Smart Home and Medical System

Wireless Personal Communications - The number of aged and disabled people has been increasing worldwide. To look after these people is a big challenge in this era. However, scientists overcome the...     

A Molecular Dynamics Study of Description Models for Shear Viscosity in Nanochannels: Mixtures and Effect of Temperature

Equilibrium molecular dynamics simulation was utilized to calculate the shear viscosity of monoatomic molecules liquid flow confined in a nanochannel in the pure state and their binary mixtures. The pure flow viscosity data of argon, krypton, and xenon were used to predict their binary mixture viscosities using prediction methods proposed in the literature. Each method was evaluated by comparison of its results with those obtained by validated molecular dynamics simulation at different temperatures. In addition, correlative methods for mixture viscosity estimation and temperature dependence models were evaluated and corresponding model parameters were obtained. Moreover, the relations representing mixture parameter values as a function of the pure ones were determined and evaluated according to their accuracy.     

Rotation-invariant multiresolution texture analysis using radon and wavelet transforms.

A new rotation-invariant texture-analysis technique using Radon and wavelet transforms is proposed. This technique utilizes the Radon transform to convert the rotation to translation and then applies a translation-invariant wavelet transform to the result to extract texture features. A kappa-nearest neighbors classifier is employed to classify texture patterns. A method to find the optimal number of projections for the Radon transform is proposed. It is shown that the extracted features generate an efficient orthogonal feature space. It is also shown that the proposed features extract both of the local and directional information of the texture patterns. The proposed method is robust to additive white noise as a result of summing pixel values to generate projections in the Radon transform step. To test and evaluate the method, we employed several sets of textures along with different wavelet bases. Experimental results show the superiority of the proposed method and its robustness to additive white noise in comparison with some recent texture-analysis methods.