Electroless copper-phosphorus coatings with the addition of silicon carbide （SiC） particles

Cu-P-silicon carbide(SiC)composite coatings were deposited by means of electroless plating.The effects ofpH values,temperature,and different concentrations of sodium hypophosphite(NaH2PO2·H2O),nickel sulfate(NiSO4·6H2O),sodium citrate(C6H5Na3O7·2H2O)and SiC on the deposition rate and coating compositions were evaluated,and the bath formulation for Cu-P-SiC composite coatings was optimised.The coating compositions were determined using energy-dispersive X-ray analysis(EDX).The corresponding optimal operating parameters for depositing Cu-P-SiC are as follows:pH 9; temperature,90℃; NaH2PO2·H2O concentration,125 g/L; NiSO4·6H2O concentration,3.125 g/L; SiC concentration,5 g/L; and C6H5Na3O7·2H2O concentration,50 g/L.The surface morphology of the coatings analysed by scanning electron microscopy(SEM)shows that Cu particles are uniformly distributed.The hardness and wear resistance of Cu-P composite coatings are improved with the addition of SiC particles and increase with the increase of SiC content.     

On the role of Ca in suppressing the corrosion of Pb anode in H2SO4

Abstract-The anodic behaviour of some Pb-Ca (0·2–0·8 per cent) alloys in H₂SO₄ solutions has been studied both under potentiostatic and galvanostatic conditions. It has been shown that the protective nature of the PbSO₄ film is markedly improved by alloying Ca with Pb. The role of Ca in increasing the corrosion resistance of Pb in H₂SO₄ is discussed.     

GTD-111高温合金瞬时液相连接过程中显微组织的变化

研究连接温度和时间对瞬时液相连接GTD-111高温合金显微组织的影响.连接过程采用BNi-3填料,在1080、1120和1160℃下,分别进行195、135和90 min的等温凝固,再进行均匀化热处理.结果表明,在冷却过程中,接头区域连续形成富Ni硼化物、Ni?B?Si三元化合物和共晶γ的金属间化合物和共晶化合物.随着...     

Visualization and concentration measurement of a direct-injection hydrogen jet in a constant-volume vessel using spark-induced breakdown spectroscopy

In this work, spark-induced breakdown spectroscopy (SIBS) was employed to investigate the mixing process of a hydrogen jet in a constant-volume vessel. The local fuel concentration of the hydrogen jet was measured at several locations, using a SIBS sensor. A high-speed camera was used to visualize spark discharge fluctuations, and hydrogen jet concentration measurements were conducted simultaneously. Spectrally resolved atomic emissions from the plasma generated by the spark plug were examined to determine the local equivalence ratio. Direct visualization of the spark discharge provided useful information about the influence of spark discharge characteristics related to the spark timing. Using the developed SIBS sensor, atomic emission spectra were obtained from hydrogen H_α at 656 nm and nitrogen N (I) at 501 nm. Comparison of the intensity peaks of atomic emissions from hydrogen and nitrogen allows the local hydrogen concentration in a measured volume to be determined, and hence also the local equivalence ratio. The measurement results demonstrate the local variation in the equivalence ratio throughout the jet and along its axis. From the results, the spatial structure of the hydrogen jet affects the hydrogen/nitrogen mixing and could be clarified with SIBS technique when the spark is discharged.     

First and second law investigations of a new solar‐assisted thermodynamic cycle for triple effect refrigeration

This investigation is persuaded for the first and second law analyses of a new solar‐driven triple‐effect refrigeration cycle using Duratherm 600 oil (Duratherm Extended Life Fluid, NY, USA) as the heat transfer fluid is performed. The proposed cycle is an integration of ejector, absorption, and cascaded refrigeration cycles that could produce refrigeration output of different magnitude at different temperature simultaneously. Both exergy destruction and losses in each component and hence in the overall system are determined to identify the causes and locations of the thermodynamic imperfection. The effects of some influenced parameters such as hot oil outlet temperature, refrigerant turbine inlet pressure, and the evaporator temperature of ejector and cascaded refrigeration cycle have been observed on the first and second law performances. It is found that maximum irreversibility occurs in central receiver as 52.5% and the second largest irreversibility of 25% occurs in heliostat field. The second law efficiency of the solar driven triple effect refrigeration cycle is 2%, which is much lower than its first law efficiency of 11.5%. Analysis clearly shows that performance evaluation based on the first law analysis is inadequate and hence, more meaningful evaluation must be included in the second law analysis. Copyright © 2013 John Wiley & Sons, Ltd.     

Discrete-time chaotic-map truly random number generators: design, implementation, and variability analysis of the zigzag map

In this paper, we introduce a novel discrete chaotic map named zigzag map that demonstrates excellent chaotic behaviors and can be utilized in truly random number generators (TRNGs). We comprehensively investigate the map and explore its critical chaotic characteristics and parameters. We further present two circuit implementations for the zigzag map based on the switched current technique as well as the current-mode affine interpolation of the breakpoints. In practice, implementation variations can deteriorate the quality of the output sequence as a result of variation of the chaotic map parameters. In order to quantify the impact of variations on the map performance, we model the variations using a combination of theoretical analysis and Monte-Carlo simulations on the circuits. We demonstrate that even in the presence of the map variations, a TRNG based on the zigzag map passes all of the NIST 800-22 statistical randomness tests using simple post processing of the output data.     

On the design of suboptimal sliding manifold for a class of nonlinear uncertain time-delay systems

This paper proposes a new method to design suboptimal sliding manifolds for a class of nonlinear uncertain systems with state and input delays. A switching control law is obtained based on the designed suboptimal sliding manifold. It is proved that the proposed method is able to guarantee the stability of the closed-loop system in the presence of uncertainty. Three numerical simulations are given to illustrate the effectiveness of the proposed method.     

Hybrid model of content extraction

We present a hybrid model for content extraction from HTML documents. The model operates on Document Object Model (DOM) tree of the corresponding HTML document. It evaluates each tree node and associated statistical features like link density and text distribution across the node to predict significance of the node towards overall content provided by the document. Once significance of the nodes is determined, the formatting characteristics like fonts, styles and the position of the nodes are evaluated to identify the nodes with similar formatting as compared to the significant nodes. The proposed hybrid model is derived from two different models, i.e., one is based on statistical features and other on formatting characteristics and achieved the best accuracy. We describe the validity of model with the help of experiments conducted on the standard data sets. The results revealed that the proposed model outperformed other existing content extraction models. We present a browser based implementation of the proposed model as proof of concept and compare the implementation strategy with various state of art implementations. We also discuss various applications of the proposed model with special emphasis on open source intelligence.