Comparison of Performance of Packet Scheduling Algorithms in LTE-A HetNets

The concept of usage of heterogeneous networks (HetNets) is about improving the LTE system performance by increasing the capacity and coverage of the Macro cell. In this paper, a performance comparison of various packet scheduling algorithms such as Proportional Fair, Maximum Largest Weighted Delay First and Exponential/Proportional Fair is studied in detail in the HetNets environment. The key performance indicators such as throughput, packet loss ratio, delay and fairness are considered to judge the performance of the scheduling algorithms. Various strategies such as increasing the number of Pico cells in the cell edge were used in the simulation for the performance evaluation study. The results achieved through various simulations show that adding Pico cells to the existing Macros enhances the overall system performance in addition to the various scheduling algorithms implemented in Macros. For reader’s convenience, various types of graphs have been used to represent the simulation results to better understand the performance metrics of various scheduling algorithms. Simulation results shows that overall system gain has increased because of adding Picos and thereby providing better coverage in the cell edge areas and thereby increasing the capacity of the network to provide better quality of service.     

Spectroscopic studies of sol–gel grown CdS nanocrystalline thin films for optoelectronic devices

CdS is one of the highly photosensitive candidate of II–VI group semiconductor material. Therefore CdS has variety of applications in optoelectronic devices. In this paper, we have fabricated CdS nanocrystalline thin film on ultrasonically cleaned glass substrates using the sol–gel spin coating method. The structural and surface morphologies of the CdS thin film were investigated by X-ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) respectively. The surface morphology of thin films showed that the well covered substrate is without cracks, voids and hole. The round shape particle has been observed in SEM micrographs. The particles sizes of CdS nanocrystals from SEM were estimated to be～10–12 nm. Spectroscopic properties of thin films were investigated using the UV–vis spectroscopy, Photoluminescence and Raman spectroscopy. The optical band gap of the CdS thin film was estimated by UV–vis spectroscopy. The average transmittance of CdS thin film in the visible region of solar spectrum found to be～85%. Optical band gap of CdS thin film was calculated from transmittance spectrum ～2.71 eV which is higher than bulk CdS (2.40 eV) material. This confirms the blue shifting in band edge of CdS nanocrystalline thin films. PL spectrum of thin films showed that the fundamental band edge emission peak centred at 459 nm also recall as green band emission.     

An AWG based colorless WDM-PON with RZ-DPSK modulated downstream and re-modulation of DL signal for OOK upstream

We proposed an arrayed waveguide granting (AWG) based 10 Gbps full duplex wavelength division multiplexing passive optical network (WDM-PON) utilizing a retum-to-zero differential phase shift keying (R...     

Silicene Nanoribbons on an Insulating Thin Film

Silicene, a new 2D material has attracted intense research because of the ubiquitous use of silicon in modern technology. However, producing free-standing silicene has proved to be a huge challenge. Until now, silicene could be synthesized only on metal surfaces where it naturally forms strong interactions with the metal substrate that modify its electronic properties. Here, the authors report the first experimental evidence of silicene nanoribbons on an insulating NaCl thin film. This work represents a major breakthrough, for the study of the intrinsic properties of silicene, and by extension to other 2D materials that have so far only been grown on metal surfaces.     

The effect of heat treatments on the properties of Ti/Pt heating elements for gas sensor applications

Ti/Pt as heating element for gas sensor applications was fabricated on silicon (Si) wafer substrate. The fabricated device was subjected to heat treatment at different prescribed time periods for thermal stability. The energy dispersion spectroscopy (EDS) results of the device indicated that there were no Ti traces on the Pt surface after heat treatment at 450 °C for 3 and 4 h in an argon (Ar) atmosphere. A maximum temperature coefficient of resistance (TCR) with a value of 2.88×10^?3 K^?1 was obtained for the device with 3 h heat treatment.     

Effective Traffic Grooming Algorithms in SONET/WDM Ring Networks

Much work has focused on traffic grooming in SONET/WDM ring networks. Previous work has considered many aspects of traffic grooming, including minimizing the number of ADMs, minimizing the number of wavelengths, considering different traffic models, using different network architectures, incorporating switching capability and so on. In this work, we study traffic grooming in unidirectional ring networks with no switching capability under both uniform traffic and non-uniform traffic models to reduce electronic multiplexing costs. Based on the clustering notion, we derive a general and tighter lower bound for the number of ADMs required in traffic grooming under the uniform all-to-all traffic model. This bound reduces to special cases obtained in previous work. We also derive general, tighter, and closed form lower bounds for the number of ADMs required under two non-uniform traffic models: the distance-dependent traffic model and the non-uniform symmetric traffic model. Cost-effective multi-phase algorithms that exploit traffic characteristics are then designed and studied to efficiently groom traffic streams under different traffic models. Our numerical and simulation results show that the proposed multi-phase algorithms outperform existing traffic grooming algorithms by using a fewer number of ADMs. Our algorithms in several cases also achieve the lower bounds derived.     

Synthesis and Microwave Dielectric Properties of SrLa4−x Pr x Ti5O17 (0 ≤ x ≤ 4) Ceramics

Single-phase ceramics in the SrLa_4?x Pr _x La₄Ti₅O₁₇ (0 ≤ x ≤ 4) series were processed via a solid-state sintering route. X-ray diffraction analysis revealed single-phase ceramics for all the compositions. The molar volume (V _m) decreased while the theoretical density (ρ _th) increased with increase in the Pr content. Substitution of Pr³⁺ decreased the relative permittivity (ε _r) and temperature coefficient of resonant frequency (τ _f) due to its smaller ionic polarizability (α _d) and ionic radius than La³⁺. In the present study, ε _r ≈ 54.2, Q _u f ₀  ≈ 7935 GHz, and τ _f  ≈ ?20.3 ppm/°C were achieved for the composition with x = 2 (i.e., SrLa₂Pr₂Ti₅O₁₇).     

Novel structure of GaAs-based interdigital-gated HEMT plasma devices for solid-state THz wave amplifier

Theoretical analysis of potential distribution in the interdigital-gated high electron mobility transistor (HEMT) plasma wave device was carried out. The dc I–V characteristics of capacitively coupled interdigital structure showed that uniformity of electric field under the interdigital gates was improved compared to the dc-connected interdigital gate structure. Admittance measurements of capacitively coupled interdigital gate structure in the microwave region of 10–40 GHz showed the conductance modulation by drain–source voltage. These results indicate the existence of plasma wave interactions.     

Enhancing inter-PMIPv6-domain for superior handover performance across IP-based wireless domain networks

As a network-based localized mobility management protocol, Proxy Mobile IPv6 (PMIPv6) enables a Mobile Host (MH) to roam within a localized domain without MH intervention in the mobility-related signalling. However, the PMIPv6 maintains MH mobility support in a restriction domain. Therefore, whenever the MH roams away from the PMIPv6 domain, its reachability status will be broken-down causing high handover latency and inevitable traffic loss for its communication session. This article proposes a proactive mechanism to mange the MH handover and maintain its data session continually across inter-PMIPv6-domains. The proposed mechanism introduces an intermediate global mobility anchor entity, called, which is responsible to coordinate MH handover as well as redirect its traffic across inter-PMIPv6-domains. Through various simulation evaluations, via ns-2, several experiments were conducted, revealing numerous results that verify the proposed mechanism superior performance over the conventional inter-PMIPv6-domain handover schemes in terms of handover latency, achieved throughput, protocol signalling cost and end-to-end traffic delivery latency.