On the adjoint-consistent formulation of interface conditions in goal-oriented error estimation and adaptivity for fluid–structure interaction

The numerical solution of fluid–structure-interaction problems poses a paradox in that most of the computational resources are consumed by the subsystem of least practical interest, viz., the fluid. Goal-oriented adaptive discretization methods provide a paradigm to bypass this paradox. Based on the solution of a dual problem, the contribution of local residuals to the error in a specific goal functional is estimated, and only the regions that yield a dominant contribution are refined. In the present work, we address a fundamental complication in the application of goal-oriented adaptivity to fluid–structure-interaction problems, namely, that the treatment of the interface conditions has nontrivial consequences for the properties of the dual problem. In the context of a linearized model problem, we consider two equivalent discretizations differing only on the formulation of the interface coupling terms. By means of an adjoint consistency analysis, we show that only one of these discretizations is adjoint consistent. Numerical experiments convey that the two discretizations behave very differently for the dual problem, and that the adjoint-consistent discretization yields more reliable error estimates. Based on the adjoint-consistent discretization, we finally present some h- and hp-adaptive results, confirming that tremendous savings in computational cost can be realized through the use of goal-oriented refinement strategies. The numerical experiments illustrate that the goal-oriented approach effectively equilibrates the error contributions of the fluid and structure subsystems, which is imperative for efficiently resolving the coupled fluid–structure-interaction problem, and which cannot be accomplished by uniform or residual-based refinement strategies.     

Temporal kernel CCA and its application in multimodal neuronal data analysis

Data recorded from multiple sources sometimes exhibit non-instantaneous couplings. For simple data sets, cross-correlograms may reveal the coupling dynamics. But when dealing with high-dimensional multivariate data there is no such measure as the cross-correlogram. We propose a simple algorithm based on Kernel Canonical Correlation Analysis (kCCA) that computes a multivariate temporal filter which links one data modality to another one. The filters can be used to compute a multivariate extension of the cross-correlogram, the canonical correlogram, between data sources that have different dimensionalities and temporal resolutions. The canonical correlogram reflects the coupling dynamics between the two sources. The temporal filter reveals which features in the data give rise to these couplings and when they do so. We present results from simulations and neuroscientific experiments showing that tkCCA yields easily interpretable temporal filters and correlograms. In the experiments, we simultaneously performed electrode recordings and functional magnetic resonance imaging (fMRI) in primary visual cortex of the non-human primate. While electrode recordings reflect brain activity directly, fMRI provides only an indirect view of neural activity via the Blood Oxygen Level Dependent (BOLD) response. Thus it is crucial for our understanding and the interpretation of fMRI signals in general to relate them to direct measures of neural activity acquired with electrodes. The results computed by tkCCA confirm recent models of the hemodynamic response to neural activity and allow for a more detailed analysis of neurovascular coupling dynamics.     

Method development for epoxy resin analysis

Epoxy resin based negative photo resists are showing interesting properties which are useful for a series of applications in electronic industries (Mark et al. in Encyclopedia of polymer science and engineering, Wiley, New York, 1986; Potter in Epoxide resins, Springer, New York, 1970; May and Tanka in Epoxy resin chemistry and technology, Marcel Dekker, New York, 1973; Bauer in Epoxy resin chemistry, vol 114, American Chemical Society, Washington, 1979; Hood in RAPRA Rev Rep 38:4, 1990). Especially in micro system technologies they promise a high potential. To adjust the properties for the particular application modification of the chemical composition and crosslinker system must be performed. An actual problem is the constancy in behaviour during the LIGA-process of the resist mixture. In this work analytical techniques are used to get a detailed insight into the chemical composition of a commercial available epoxy novolac resin. Methods like size exclusion chromatography (SEC), matrix assisted laser desorption-time of flight (MALDI-ToF) and fourier transform infrared spectroscopy (FTIR) offer information about the molecular weight and functionality. The results reveal a distribution in molecular weight and functionality. Due this the resin was chemically modified. After processing a dependency of molecular weight and therefore the amount of epoxy groups existent was obtained.     

Estimation of Detection Thresholds for Redirected Walking Techniques

In immersive virtual environments (IVEs), users can control their virtual viewpoint by moving their tracked head and walking through the real world. Usually, movements in the real world are mapped one-to-one to virtual camera motions. With redirection techniques, the virtual camera is manipulated by applying gains to user motion so that the virtual world moves differently than the real world. Thus, users can walk through large-scale IVEs while physically remaining in a reasonably small workspace. In psychophysical experiments with a two-alternative forced-choice task, we have quantified how much humans can unknowingly be redirected on physical paths that are different from the visually perceived paths. We tested 12 subjects in three different experiments: (E1) discrimination between virtual and physical rotations, (E2) discrimination between virtual and physical straightforward movements, and (E3) discrimination of path curvature. In experiment E1, subjects performed rotations with different gains, and then had to choose whether the visually perceived rotation was smaller or greater than the physical rotation. In experiment E2, subjects chose whether the physical walk was shorter or longer than the visually perceived scaled travel distance. In experiment E3, subjects estimate the path curvature when walking a curved path in the real world while the visual display shows a straight path in the virtual world. Our results show that users can be turned physically about 49 percent more or 20 percent less than the perceived virtual rotation, distances can be downscaled by 14 percent and upscaled by 26 percent, and users can be redirected on a circular arc with a radius greater than 22 m while they believe that they are walking straight.     

Tablet use in schools: a critical review of the evidence for learning outcomes

The increased popularity of tablets in general has led to uptake in education. We critically review the literature reporting use of tablets by primary and secondary school children across the curriculum, with a particular emphasis on learning outcomes. The systematic review methodology was used, and our literature search resulted in 33 relevant studies meeting the inclusion criteria. A total of 23 met the minimum quality criteria and were examined in detail (16 reporting positive learning outcomes, 5 no difference and 2 negative learning outcomes). Explanations underlying these observations were analysed, and factors contributing to successful uses of tablets are discussed. While we hypothesize how tablets can viably support children in completing a variety of learning tasks (across a range of contexts and academic subjects), the fragmented nature of the current knowledge base, and the scarcity of rigorous studies, makes it difficult to draw firm conclusions. The generalizability of evidence is limited, and detailed explanations as to how, or why, using tablets within certain activities can improve learning remain elusive. We recommend that future research moves beyond exploration towards systematic and in‐depth investigations building on the existing findings documented here.     

Study on TSV isolation liners for a Via Last approach with the use in 3D-WLP for MEMS

This paper discusses approaches for the isolation of deep high aspect ratio through silicon vias (TSV) with respect to a Via Last approach for micro-electro-mechanical systems (MEMS). Selected TSV samples have depths in the range of 170…270 µm and a diameter of 50 µm. The investigations comprise the deposition of different layer stacks by means of subatmospheric and plasma enhanced chemical vapour deposition (PECVD) of tetraethyl orthosilicate; Si(OC₂H₅)₄ (TEOS). Moreover, an etch-back approach and the selective deposition on SiN were also included in the investigations. With respect to the Via Last approach, the contact opening at the TSV bottom by means of a specific spacer-etching method have been addressed within this paper. Step coverage values of up to 74 % were achieved for the best of those approaches. As an alternative to the SiO₂-isolation liners a polymer coating based on the CVD of Parylene F was investigated, which yields even higher step coverage in the range of 80 % at the lower TSV sidewall for a surface film thickness of about 1000 nm. Leakage current measurements were performed and values below 0.1 nA/cm² at 10 kV/cm were determined for the Parylene F films which represents a promising result for the aspired application to Via Last MEMS-TSV.     

Low retaining force optical viewport seal

We report on the experimental realization of an ultrahigh vacuum (UHV) indium sealing between a conflat knife edge and an optical window. The sealing requires a very low clamping force and thus allows for the use of very thin and fragile windows.     

From concepts to consistent object specifications: Translation of a domain-oriented feature framework into practice

A steady increase in consumer demands,and severe constraints from both a somewhat damaged environment and newly installed government policies,require today‘s product design and development to be faster and more efficient than ever before,yet utilizing even fewer resources.New holistic approaches,such at total product life cycle modeling which embraces all aspercts of a product‘s life cycle,are current attempts to solve these problems,Within the field of product design and modeling,feature technology has proved to be one very promising solution component.Owing to the tremendous increase in information technology,to transfer from low level data processing towards knowledge modeling and information processing is about to bring a change in almost every computerized application.From this viewpoint,current problems of both feature frameworks and feature systems are analyzed in respect to static and dynamic consistency breakdowns.The analysis ranges from early stager of designing(feature)concepts to final system implementation and application.For the first tie,an integrated view is given on approaches,solutions and practical experience,with feature concepts and structures,providing both a feature framework and its implementation with sufficient system architecture and computational power to master a fair number of known consistency breakdowns,while providing for robust contexts for feature semantics and integrated models.Within today;s heavy use of information technology these are pre-requisites if the full potential of feature technology is to be successfully translated into practice.