Efficient preparation of DHMF and HMFA from biomass-derived HMF via a Cannizzaro reaction in ionic liquids

2,5-Dihydroxymethylfuran (DHMF) and 5-hydroxymethylfuranoic acid (HMFA) are the versatile intermediate chemicals of high industrial potential. An efficient preparation of both DHMF and HMFA is reported from biomass-derived HMF via a Cannizzaro reaction using ionic liquids as a reusable reaction solvent under the water-free conditions. The operationally simple and environment-friendly process produces both DHMF and HMFA from HMF consistently in good to high yields up to five runs with the recycled ionic liquid.     

平坦色散高非线性光子晶体光纤的制备与实验

运用改进的全矢量有效折射率法(IFVEIM),课题组自行设计了一种在900 nm附近具有低平坦色散高非线性特性的光子晶体光纤.并且在改进工艺的基础上,采用中心抽真空挤压法对其进行了制备.虽然所制得光纤的结构参数与理论设计值存在一定的偏差,但其在所研究波段内色散值仅为0.5 ps/km/nm,非线性系数值则达到了35(W*km)-1,这在当前规则结构的纯硅光子晶体光纤中已经很高.最后,我们对其进行了非线性实验测试,其在400～1 400 nm的波段范围内展现出了宽平坦的超连续谱.     

Photopolymerization of hyperbranched aliphatic acrylated poly(amide ester). I. Synthesis and properties

The hyperbranched aliphatic poly(amide ester) (HAPAE) was synthesized based on 4‐N,N‐di(2‐hydroxy ethyl)‐4‐ketobutyric acid prepared by the reaction of succinic anhydride with diethanol amine, as an AB₂ monomer (repeating unit), and with 2‐ethyl‐2‐(hydroxymethyl)‐1,3‐propanediol, as a core molecule, using acid catalysis. The second generation of the product was characterized by measuring dynamic viscosity, which decreased sharply with the increase in frequency. The product exhibits relative thermal stability as analyzed by thermogravimetry in a nitrogen atmosphere. The glass transition temperature, determined by differential scanning calorimetry, is ?27 °C. The molar mass was measured by vapor pressure osmometry. The polydispersity, measured by size exclusion chromatography, is 2.16. Dynamic mechanical thermal analyses were performed to characterize the thermal properties of the ultraviolet‐cured films of the acrylate‐modified HAPAE. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1630–1636, 2001     

Phase‐separation prevention and performance improvement of poly(vinyl acetate)/TEOS hybrid using modified sol‐gel process

The formation of covalent bonds between silanols in copolymer and those in silica prevents organic–inorganic phase separation. Two series of hybrid composite materials, poly(vinyl acetate‐co‐vinyl trimethoxysilane)/TEOS and poly[vinyl acetate‐co‐3‐(trimethoxysilyl)propyl methacrylate]/TEOS, were fabricated using a modified sol‐gel process. The hybrids were transparent. Two kinds of silane coupling agents, vinyl trimethoxysilane (VTS) and 3‐(trimethoxysilyl)propyl methacrylate (γ‐MPS), were used to prevent macrophase separation through formation of covalent bonds. Thermal analysis showed that γ‐MPS was more effective than VTS for the formation of covalent bonds. Enhancement of thermal stability of the hybrids was investigated by thermogravimetric analysis. Photomicrographs of scanning electron microscopy and images of atomic force microscopy indicated that inorganic silica particles were homogeneously dispersed in less than 50 nm in organic matrix. The morphological properties of hybrids were strongly dependent on the organic–inorganic composition. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2310–2318, 2001     

Effect of zone drawing on the structure and properties of melt‐spun poly(trimethylene terephthalate) fiber

Melt‐spun poly(trimethylene terephthalate) (PTT) fibers were zone‐drawn and the structures and properties of the fibers were investigated in consideration of the spinning and zone‐drawing conditions. The draw ratio increased up to 4 with increasing drawing temperature to 180°C, at a maximum drawing stress of 220 MPa. Higher take‐up velocity gave lower drawability of the fiber. The PTT fiber taken up at 4000 rpm was hardly drawn, in spite of using maximum drawing stress, because a high degree of orientation had been achieved in the spinning procedure. However, an additional enhancement of birefringence was observed, indicating a further orientation of PTT molecules by zone drawing. The exotherm peak at 60°C disappeared and was shifted to a lower temperature with an increase in the take‐up velocity, which means that the orientation and crystallinity of the fiber increased. The d‐spacing of (002) plane increased with increasing take‐up velocity and draw ratio, whereas those of (010) and (001) planes decreased. In all cases, the crystal size increased with take‐up velocity and draw ratio. The cold‐drawn PTT fiber revealed a kink band structure, which disappeared as the drawing temperature was raised. The physical properties of zone‐drawn PTT fibers were improved as the draw ratio and take‐up velocity increased. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 3471–3480, 2001     

棒形喷淋器的设计及应用

随着化学清洗范围的不断扩大，喷淋清洗技术在各类贮罐的清洗中得到了大量应用。针对一次圆顶贮罐的清洗，设计出了一种棒形喷淋器并取得满意的效果     

延长油田低渗透油藏二氧化碳驱油影响因素室内实验研究

针对延长油田低渗透油藏,通过开展岩心注气物理模拟实验,探索提高低渗透油藏CO2驱油开发效果影响因素及其规律。实验表明,不同驱替压力下,注入压力越高,采收率越高,注入压力高于最小混相压力后,采收率不再增加,采收率最高可达66.68%;并且注入压力增加,气体突破时间延迟;注入速度越高,采收率和换油率越高,CO2驱油开发效果越好,生产汽油比也越高;岩心渗透率高于1.26×10-3μm2时,渗透率增大,采收率差别不大,但相比水驱,采收率提高程度较大;岩心渗透率低于1.26×10-3μm2时,渗透率增大,采收率增大,但相比水驱,采收率提高程度较小。     

Synthesis and biological activity of medium range molecular weight polymers containing exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid (ETCA), was prepared by reaction of maleimidocaproic acid and furan. The homopolymer of ETCA and its copolymers with acrylic acid (AA) or with vinyl acetate (VAc) were obtained by photopolymerizations using 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C. The synthesized ETCA and its polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The apparent average molecular weights and polydispersity indices determined by gel permeation chromatography (GPC) were as follows: M_n = 9600 g mol^?1, M_w = 9800 g mol^?1, M_w/M_n = 1.1 for poly(ETCA); M_n = 14 300 g mol^?1, M_w = 16 200 g mol^?1, M_w/M_n = 1.2 for poly(ETCA‐co‐AA); M_n = 17 900 g mol^?1, M_w = 18 300 g mol^?1, M_w/M_n = 1.1 for poly(ETCA‐co‐VAc). The in vitro cytotoxicity of the synthesized compounds against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines decreased in the following order: 5‐fluorouracil (5‐FU) ≥ ETCA > polymers. The in vivo antitumour activity of the polymers against Balb/C mice bearing sarcoma 180 tumour cells was greater than that of 5‐FU at all doses tested. © 2001 Society of Chemical Industry     

碳材料复合橡胶研究进展

综述了各种碳材料复合橡胶的发展及研究进程,主要介绍了石墨烯、氧化石墨烯、碳纳米管等碳系材料结构、功能化方式及橡胶复合材料加工方法,得出各种碳材料不仅能较大改善橡胶的各种基础性能,而且赋予了橡胶很多新的功能,比如热量传导、电荷传输,因而能够提高橡胶产品性价比和档次。     

Effects of surfactants on rheological properties of a dispersed viscoelastic microsphere

The swelling ratio is an important performance for the application of viscoelastic microsphere. The reduction of swelling ratio can affect the particle size. The compatibility between particle size and formation pore can affect the plugging performance and EOR capability. Adsorption characteristics of cationic surfactant cetyltriethylammnonium bromide (CTAB), anionic surfactant petroleum sulfonate applied in GangXi oilfield (GXPS), and nonionic surfactant nonylphenol ether (TX‐10) onto viscoelastic microspheres and the effect of the three types of surfactant on swelling ratio of viscoelastic microspheres were investigated. Effects of surfactants on rheological properties of viscoelastic microspheres were researched in two different modes referring to steady shear and dynamic shear, respectively, using Physica MCR301 Rheometer. The results showed that the interactions between viscoelastic microsphere and surfactants CTAB were electrostatic attraction and hydrophobic association, that the interaction between viscoelastic microsphere and surfactants TX‐10 was just hydrophobic association, and that the interactions between viscoelastic microsphere and GXPS were electrostatic repulsion and hydrophobic association. At the same initial surfactant concentration, all these three types of surfactant could be adsorbed onto the surface of viscoelastic microspheres and reduce its swelling ratio and storage modulus. Because of different amount of adsorption, the extent of reduction order on swelling ratio and storage modulus was CTAB>TX‐10>GXPS. In addition, the yield stress of viscoelastic microspheres which was obtained from modeling the data to Herschel‐Bulkley model decreases with the increase of surfactant adsorption. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42278.