Dissolving grade eco-clean cellulose pulps by integrated fractionation of cardoon (Cynara cardunculus L.) stalk biomass

A biorefinery scheme with separate processing of the two main carbohydrate streams (cellulose and hemicellulose-derived) was employed to the energy crop cardoon (Cynara cardunculus L.) to fractionate the whole stalk material. A high quality xylose-enriched substrate was obtained after selective one-step dilute sulfuric acid hydrolysis of hemicelluloses, yielding 18.1 g of xylose per 100 g of dry biomass. The xylan-free solid residue was delignified by sulfur-free organosolv pulping to produce dissolving grade pulps having 93.8% of α-cellulose (33.1 g per 100 g dry initial biomass) and 79.5% degree of crystallinity. About 76% of crop lignin (13.8 g per 100 g dry initial biomass) was recovered from the spent pulping liquor as a high purity reactive precipitated organosolv lignin. Response surface methodology was used for statistical modeling and optimization of the applied separation processes. The central composite rotatable design was applied to assess the effects of the principal technological parameters on the main reaction outputs.     

Determining adulteration of canned products using SNIF-NMR and IRMS: detection of undeclared addition of synthetic acetic acid

Possible adulteration of canned products containing spirit vinegar pickle by adding synthetic acetic acid is a significant problem of the food industry. Isotope analyses, which determine botanical origin of acetic acid and also can detect synthetic acid, were applied to detect undeclared addition of synthetic acetic acid to canned products. The aim of the study was to improve the extraction technique for the SNIF-NMR (²H/¹H; site-specific natural isotopic fractionation-nuclear magnetic resonance) and IRMS (¹³C/¹²C; isotope ratio mass spectrometry) isotope methods and for an atypical matrix and to determine isotope ratios in canned vegetables pickle to prove their adulteration or authenticity. The following set of canned products was analysed: pickled cucumbers (n = 16) and one vinegar pickle purchased in the Czech market and six model (cucumber) pickles. The determined ratios of ²H/¹H and ¹³C/¹²C for the pickled cucumbers proved to be authentic ranged from 89.4 to 107.0 ppm and from ?28.7 to ?15.6 ‰, respectively; for the synthetic acetic acids diluted with water they ranged from 114.2 to 129.0 ppm and from ?44.9 to ?33.4 ‰, respectively. Isotope analyses were confirmed as a reliable tool for assessing authenticity of canned products. The method enables detection of synthetic acetic acid addition into vinegars and canned vegetables containing vinegar pickle up from 20 % (of total acidity).     

Variation in Preen Oil Composition Pertaining to Season,Sex, and Genotype in the Polymorphic White-Throated Sparrow

Evidence for the the ability of birds to detect olfactory signals is now well documented, yet it remains unclear whether birds secrete chemicals that can be used as social cues. A potential source of chemical cues in birds is the secretion from the uropygial gland, or preen gland, which is thought to waterproof, maintain, and protect feathers from ectoparasites. However, it is possible that preen oil also may be used for individual recognition, mate choice, and signalling social/sexual status. If preen oil secretions can be used as socio-olfactory signals, we should be able to identify the volatile components that could make the secretions more detectable, determine the seasonality of these secretions, and determine whether olfactory signals differ among relevant social groups. We examined the seasonal differences in volatile compounds of the preen oil of captive white-throated sparrows, Zonotrichia albicollis. This species is polymorphic and has genetically determined morphs that occur in both sexes. Mating is almost exclusively disassortative with respect to morph, suggesting strong mate choice. By sampling the preen oil from captive birds in breeding and non-breeding conditions, we identified candidate chemical signals that varied according to season, sex, morph, and species. Linear alcohols with a 10–18 carbon chains, as well as methyl ketones and carboxylic acids, were the most abundant volatile compounds. Both the variety and abundances of some of these compounds were different between the sexes and morphs, with one morph secreting more volatile compounds in the non-breeding season than the other. In addition, 12 compounds were seasonally elevated in amount, and were secreted in high amounts in males. Finally, we found that preen oil signatures tended to be species-specific, with white-throated sparrows differing from the closely related Junco in the abundances and/or prevalence of at least three compounds. Our data suggest roles for preen oil secretions and avian olfaction in both non-social as well as social interactions.     

Temperature-dependent kinetics of grape seed phenolic compounds extraction: Experiment and model

The kinetics of a batch solid–liquid extraction of total phenolic compounds (PC) from milled grape seed (Vitis vinifera L. cv. “Frankovka”) using 50% ethanol at different extraction temperatures (25–80 °C) was studied. The maximum yield of PC was 0.13 kg_GAE/kg_db after 200 min of extraction in agitated vessel at 80 °C. A new model based on the assumptions of a first order kinetics mechanism for the solid–liquid extraction and a linear equilibrium at the solid–liquid interface was developed. The model involves the concept of broken and intact cells in order to describe two successive extraction periods: a very fast surface washing process followed by slow diffusion of phenolic compounds from grape seeds to the solvent.The proposed model is suited to fit experimental data and to simulate the extraction of phenolic compounds, which was confirmed by the correlation coefficient (r ? 0.965), the root mean square error (RMSE ? 0.003 kg_GAE/kg_db) and the mean relative deviation modulus (E ? 2.149%). The temperature influenced both equilibrium partition coefficients of phenolic compounds and transport properties, which is manifested by a relatively high value of activation energy (23–24) kJ/mol and by values of effective diffusivity in seed particles.     

Burial grounds’ impact on groundwater and public health: an overview

The most common practice for disposal of dead bodies is inhumation in soil, which favours interactions with the surrounding environment and returns nutrients to the life cycle. However, when the burial ground is located where hydrogeological, geological and climatic conditions are not favourable to the process, contamination of soils and groundwater may occur, and decomposition may be inhibited, leading to social, economic and political problems. The most critical parameters when assessing the pollution potential of a burial ground are inhumation depth, geological formation, depth of the water table, density of inhumations, soil type and climate. Considering that, this paper presents an overview of the potential threat that cemeteries can pose, analysing and discussing the influence of the main variables causing environmental impacts and public health risks.     

Defects in offsite construction: timber module prefabrication

The construction industry is based on craftsmanship. Quality control and assurance procedures applied in manufacturing cannot usually be readily applied in construction, where there are higher degrees of uniqueness in each project. One category of companies, industrialized housebuilders, is attempting to bridge some of the gaps between construction and manufacturing. These companies prefabricate building modules for later assembly at the building site. Since they are wholly responsible for large parts of the building process, these companies have greater opportunities to control and improve quality in a more consistent way than ordinary construction companies. Thus, it could be hypothesized that the frequency and severity of defects should be lower in industrialized housing than in ordinary construction. The aim of the study presented here is to examine this hypothesis by measuring and characterizing defects in industrialized housing. The design and manufacturing processes at two Swedish timber module prefabrication firms has been analysed through interviews, site visits and document reviews. Quality audits from three phases of the building process were compiled, analysed and categorized to provide statistical measures of defects in industrialized housing. The results show that the case study companies are better in terms of product quality than conventional housing.     

A study of a plan-do-check-act method used in less industrialized activities: two cases from industrialized housebuilding

In construction projects, a large number of deviations are usually found during inspections and adjusted in a reactive manner. For projects to become proactive, root causes need to be identified and eliminated as a part of a process of continuous improvement (CI). Plan-do-check-act (PDCA) methods are part of CI and have been used with success within the manufacturing industry for decades. Research studies of PDCA in construction are less common, which could be explained by the past dominance of the project-based nature of construction compared to the process-based nature of manufacture. Industrialized construction, however, has changed this picture somewhat, and it is of interest to find out how well it works for less industrialized activities in construction. A PDCA method was tested in two cases selected from one medium-sized Swedish industrialized housebuilder, which uses a building system based on offsite manufactured modules. Empirical results are based on systematic data gathered through interviews and participant observations. Results from the two cases show that the PDCA method worked even when processes were divided into industrialized parts within a factory and non-industrial parts at the construction site although this might lead to temporary corrective actions rather than permanent process actions.     

Trading properties after the earthquake: the rebuilding of eighteenth‐century Lisbon

This paper introduces the innovative system used in the reconstruction of Lisbon after the 1755 earthquake. Its findings are based on original documents that offer a detailed picture of the principles and methods established to convert the land and properties of the old city into the new and standardized gridded Plan. Implemented in the mid‐eighteenth century, the methodical system outlined was, undoubtedly, an important point of reference for the large‐scale urban improvement and redevelopment operations that would follow in nineteenth‐century Europe.     

Montmorillonite as support for peroxide in the melt grafting of maleic anhydride onto polypropylene

Grafting of maleic anhydride onto polypropylene was performed in a Haake torque rheometer, in the presence of organically modified montmorillonite, MMT (used as support for the peroxide), according to a 2³ factorial design, where the maleic anhydride concentration (C_MA), peroxide concentration (C_per) and reaction time (t_r) were varied. For comparison, the reaction in the absence of MMT was also conducted. Polypropylene degradation was assessed by parallel plate rheometry and size exclusion chromatography (SEC) and percentage of reacted maleic anhydride (%MA_g) was obtained by titration and FTIR spectroscopy. The results showed differences in both systems, conventional and in the presence of MMT. The structure of polypropylene grafted with maleic anhydride, PP‐g‐MA, indicates longer branches are formed in the presence of MMT compared to in its absence, demonstrated by FTIR analysis. As in conventional reaction systems, an increase in C_per caused an increase in %MA_g and a reduction in molar mass. The variable C_MA showed to be not significant in the grafting reaction in the presence of MMT, even at high DCP levels, at a 5% significance level. On the other hand, increase in C_MA resulted in significant increase in viscosity. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44134.