Quasicrystal–crystal structural transformation in Al–5 wt.% Mn alloy

The atomic structure of Al–5 wt.%Mn (Al–5Mn) alloy, prepared by rapid solidification, and pre-annealed at 623 and 773 K for 5 and 1 h, respectively, were characterized by X-ray powder diffraction (XRD) and extended X-ray absorption fine structure (XAFS) techniques. The sample in as-quenched stage was found crystalline, consisting of metastable α-Al (Al–Mn solid solution) and icosahedral quasicrystalline I-Al₆Mn phases. Five hours annealing at 623 K proved thermal stability of both the phases. Pre-annealing at 773 K/1 h on the other hand leads to α-Al phase decomposition and structural transformation of metastable I-Al₆Mn to stable orthorhombic Al₆Mn phase. The EXAFS results indicate that Mn atoms are located preferably on the outer shell of icosahedrons. During the I-Al₆Mn→o-Al₆Mn transformation the total Al atoms coordinating one Mn were found to be constant (∼10). Based on the results, only distance/symmetry changes in atomic arrangement around Mn atoms were suggested.     

Simultaneous determination of daidzein, equol, genistein and bisphenol A in human urine by a fast and simple method using SPE and GC-MS

Human diet contains weakly estrogenic compounds such as daidzein (DAI) and genistein (GEN), phytoestrogens present in soy and many vegetables as well as bisphenol A (BPA), a contaminant from packing materials and plastic containers for foods and beverages. In light of concerns about hormonally active agents, biomonitoring methods are needed to assess human exposure to such compounds. A method for simultaneous determination of DAI, its metabolite equol (EQ), GEN, and BPA by GC-MS analysis was established, validated and applied to measure concentrations in human urine. Sample preparation involves enzymatic conjugate cleavage, SPE and derivatization by silylation. For GC/MS analysis, deuterated DAI and GEN and( 13)C-BPA are used as internal standards. LOD are 4, 4, 5 and 3 ng/mL urine for DAI, EQ, GEN and BPA, respectively. Interassay variations were 9% for DAI, 15% for EQ, 18% for GEN and 10% for BPA. Simple workup and accuracy of the method are suited for biomonitoring. An analysis of urine samples from 15 adults consuming typical German food revealed dietary exposure to phytoestrogens in all samples: GEN concentrations ranged between 13 and 238 ng/mL, those for DAI ranged from 12 to 356 ng/mL. More than half of the individuals excreted also the more estrogenic metabolite EQ, at levels of 8-128 ng/mL. Higher concentrations (GEN: 820, DAI: 960 and EQ: 1740 ng/mL) were measured in a 24 h urine sample upon ingestion of soy protein (50 g with 12.9 mg DAI and 25.2 mg GEN). Only urine collected after some days on strict phytoestrogen-free diet had undetectable isoflavone levels. BPA was detected in 9 of 15 urine samples ranging from 3 to 11 ng/mL, and at 55 ng/mL in one sample. In conclusion, a reliable method to determine BPA and isoflavones in urine was established and applied in a pilot study: Biomonitoring results show much higher dietary exposure to phytoestrogens than to BPA in German adults.     

High-tensile bolts without heat treatment

According to DIN-ISO 898-1 high tensile bolts of class 8.8 must have a quenched and tempered structure. Therefore either quenched and tempered wire rod is used for cold heading or the bolts are quenched and tempered after the bolt forming process. This paper presents a new wire rod, which offers the chance to get comparable or even better final properties and lower production costs: a low-carbon MnSi wire rod is used as basic material. The final tensile strength is produced by drawing and cold forming. The conventional final quenching and tempering is omitted and for many cases also baking can be avoided. An increased fatigue resistance and the elimination of final straightening of the bolts are additional advantages of the new process.     

Einlaufverhalten nasslaufender Lamellenkupplungen im Schlupfbetrieb

Forschung im Ingenieurwesen - Nasslaufende Lamellenkupplungen weisen zu Betriebsbeginn eine Phase des Einlaufens auf, in der sich das Reibungsverhalten durch Anpassung der Reibflächen...     

Deposition and characterization of low-loss epitaxial non-linear dielectric thin films for microwave devices

Abstract

Oxide ferroelectric thin films for frequency-tunable microwave devices, in which the dielectric constant of the non-linear dielectric is varied by application of electric fields, have been deposited using PLD. We have fabricated single phase epitaxial Ba_0.6Sr_0.4TiO₃ and KTaO₃ thin film capacitors for applications at 300K and 77K, respectively. Single phase KTaO₃ films were obtained only with excess potassium source in the target along with KTaO₃ perovskite phase. The films have been characterized for structure and morphology by X-ray diffraction and AFM. The dielectric properties were measured in the low frequency range from 100 kHz to 10 MHz, using interdigitated capacitors. Low loss tangents (0.002 at 300K) were observed for highly oriented Ba_0.6Sr_0.4TiO₃ films. The importance of low losses for various devices is discussed and the dielectric constants, loss tangents and tunability of these films are reported in this paper.     

世界上第一条新型气体绝缘高压输电线路

介绍瑞士日内瓦机场的气体绝缘输电线路（GIL）工程,涉及工程的系统设计、技术指标和施工方法等。阐述GIL具有运营成本低、安全性和可靠性高、电磁场强度低和无老化等优越性。     

Anticipation of digital patterns

A memristive device is a novel passive device, which is essentially a resistor with memory. This device can be used for novel technical applications like neuromorphic computation. In this paper, we focus on anticipation—a capability of a system to decide how to react in an environment by predicting future states. Especially, we have designed an elementary memristive circuit for the anticipation of digital patterns, where this circuit is based on the capability of an amoeba to anticipate periodically occurring unipolar pulses. The resulting circuit has been verified by digital simulations and has been realized in hardware as well. For the practical realization, we have used an Ag‐doped TiO_2?x‐based memristive device, which has been fabricated in planar capacitor structures on a silicon wafer. The functionality of the circuit is shown by simulations and measurements. Finally, the anticipation of information is demonstrated by using images, where the robustness of this anticipatory circuit against noise and faulty intermediate information is visualized.     

Cervid Prion Protein Polymorphisms: Role in Chronic Wasting Disease Pathogenesis

Chronic wasting disease (CWD) is a prion disease found in both free-ranging and farmed cervids. Susceptibility of these animals to CWD is governed by various exogenous and endogenous factors. Past studies have demonstrated that polymorphisms within the prion protein (PrP) sequence itself affect an animal’s susceptibility to CWD. PrP polymorphisms can modulate CWD pathogenesis in two ways: the ability of the endogenous prion protein (PrP^C) to convert into infectious prions (PrP^Sc) or it can give rise to novel prion strains. In vivo studies in susceptible cervids, complemented by studies in transgenic mice expressing the corresponding cervid PrP sequence, show that each polymorphism has distinct effects on both PrP^C and PrP^Sc. It is not entirely clear how these polymorphisms are responsible for these effects, but in vitro studies suggest they play a role in modifying PrP epitopes crucial for PrP^C to PrP^Sc conversion and determining PrP^C stability. PrP polymorphisms are unique to one or two cervid species and most confer a certain degree of reduced susceptibility to CWD. However, to date, there are no reports of polymorphic cervid PrP alleles providing absolute resistance to CWD. Studies on polymorphisms have focused on those found in CWD-endemic areas, with the hope that understanding the role of an animal’s genetics in CWD can help to predict, contain, or prevent transmission of CWD.     

Preparative Protein Crystallization

Preparative protein crystallization can possibly replace one or more chromatographic steps in downstream processing. The development of such crystallization processes is demanding: first, promising principal crystallization conditions must be identified; second, details about the process must be defined; and third, the crystals have to be separated from the mother liquor without putting harm of their crystalline integrity. State‐of‐the‐art about these three steps is developing fast by (i) employing new screening methods which are based on fundamental understanding of the interaction of the protein molecules, (ii) application of existing concepts of technical bulk crystallization of small molecules to preparative protein crystallization, and (iii) making available specific gentle separation machinery.     

IR spectroscopy: Suitable method for determination of curing degree and crosslinking type in melamine–formaldehyde resins

Melamine–formaldehyde (MF) resins are widely used as adhesives and finishing materials in the wood industry. During resin cure, either methylene ether or methylene bridges are formed, leading to the formation of a three-dimensional resin network. Not only the curing degree, but also the chemical species present in the cured resin determine the quality of the final product. Analytical methods allowing a detailed investigation of network formation are of great benefit to manufacturers. In the present work, resin cure of an MF precondensate is studied at different temperatures (100–200 °C) without considering the initial pH as a factor. Isoconversional kinetic analysis based on exothermal curing enthalpies enables calculation of the crosslinking degree at a given time/temperature regime. A semiquantitative determination of the chemical groups present is performed based on solid-state nuclear magnetic resonance data. Fourier transform infrared spectroscopy has shown to be a fast and reliable analytical tool with high sensitivity toward functional groups and with great potential for at-line process control. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47691.