An experimentally validated analytical model for gate line-edgeroughness (LER) effects on technology scaling

This letter introduces an analytical model to represent line-edge roughness (LER) effects on both off-state leakage and drive current for sub-100-nm devices. The model partitions a given device into small unit cells along its width, each unit cell assumes a constant gate length (i.e., cell's width is small compared to LER spatial frequency). An analytical model is used to represent saturated threshold voltage dependency on the unit cell's gate length. Using this technique, an efficient and accurate model for LER effects (through V_ts variations) on off-state leakage and drive current is proposed and experimentally validated using 193 and 248 nm lithography for devices with 80-nm nominal gate lengths. Assuming that the deviation from the ideal 0-LER case remains constant from generation to generation, the model predicts that 3 nm or less LER is required for 50-60-nm state-of-the-art devices in the 0.1-μm technology node. Based on data presented, we suggest that the LER requirement for this technology node is attainable with an alternated phase-shift type of patterning process     

A Single-Stage High-Power-Factor Electronic Ballast Based on Integrated Buck Flyback Converter to Supply Metal Halide Lamps

In this paper, a novel single-stage electronic ballast with a high power factor is presented. The ballast circuit is based on the integration of a buck converter to provide the power factor correction, and a flyback converter to control the lamp power and to supply the lamp with a low-frequency square-waveform current. Both converters work in discontinuous conduction mode, which simplifies the control. In spite of being an integrated topology, the circuit does not present additional stress of voltage or current in the main switch, which handles only the flyback or buck current, depending on the operation mode. To supply the lamp with a low-frequency square-wave current to avoid acoustic resonances, the flyback has two secondary windings that operate complementarily at a low frequency. The design procedure of the converters is also detailed. Experimental results from a 35-W metal halide lamp are presented, where the proposed ballast reached a power factor of 0.95, a total harmonic distortion of 30% (complying with IEC 61000-3-2), and an efficiency of 90%.     

Continuous-wave laser oscillation of Yb/sup 3+/ in monoclinic KLu(WO/sub 4/)/sub 2/

The strongly anisotropic monoclinic double tungstate crystal KLu(WO/sub 4/)/sub 2/ was doped with Yb/sup 3+/ ions and shown to be a highly efficient active laser medium in the 1-/spl mu/m spectral range for continuous-wave room-temperature operation, very suitable for pumping with InGaAs laser diodes.     

Lowpass minimum phase filter design using IFIR filters

A design procedure for minimum-phase FIR filters using an interpolated FIR (IFIR) filter is proposed. The IFIR technique allows two linear-phase filters of much lower order to be designed thereby making it easier to apply mipizing than is possible in high order FIR prototype filters. In this way, the problem of finding the roots of high order polynomials is overcome     

Arsenic/phosphorus LDD optimization by taking advantage ofphosphorus transient enhanced diffusion for high voltage input/outputCMOS devices

Optimization of a LDD doping profile to enhance hot carrier resistance in 3.3 V input/output CMOS devices has been performed by utilizing phosphorus transient enhanced diffusion (TED). Hot carrier effects in hybrid arsenic/phosphorus LDD nMOSFET's with and without TED are characterized comprehensively. Our result shows that the substrate current in a nMOSFET with phosphorus TED can be substantially reduced, as compared to the one without TED. The reason is that the TED effect can yield a more graded n^- LDD doping profile and thus a smaller lateral electric field. Further improvement of hot carrier reliability can be achieved by optimizing arsenic implant energy. Secondary ion mass spectrometry analysis for TED effect and two-dimensional (2-D) device simulation for electric field and current flow distributions have been conducted. The phosphorus TED effects on transistor driving current and off-state leakage current are also investigated     

Dimming of High-Brightness LEDs by Means of Luminous Flux Thermal Estimation

Usually, pulsewidth modulation (PWM) operation is selected as the best dimming strategy to drive high-brightness LEDs. Nevertheless, to obtain an enhanced full linear dimming control of the device, the luminous flux should be measured. This paper proposes a control method based on an estimator of the luminous flux emitted by the LED. Based on the characterization of the LEDs, this estimator is defined. The estimator provides the flux value from only two temperature values (the case temperature and the ambient temperature). Once the estimator is validated, the electronic driver to supply the LEDs, as well as the digital control scheme, are presented. Such a control scheme is suitable for both AM and PWM dimming strategies. A prototype of the electronic driver has been built and tested, and experimental measurements of AM and PWM dimming are presented. It can be concluded that with the proposed estimator, the flux emitted by the LEDs can be accurately estimated. Thus, the output light control of the LEDs can be accomplished by sensing temperature rather than luminous flux. The final output characteristic of the system shows linearity between the output flux and the reference value, with AM as well as with PWM dimming of the LEDs.     

Psychosocial predictors of cigarette smoking among adolescents living in public housing developments

BACKGROUND: Adolescents residing in low-income public housing developments in inner-city regions may be particularly vulnerable to a variety of risk factors associated with cigarette smoking. OBJECTIVE: To elucidate the aetiology of cigarette smoking among adolescents living in public housing developments. DESIGN, SETTING, AND SUBJECTS: We examined predictors of smoking from four domains: background characteristics, social influences, behavioural control, and psychosocial characteristics using a sample of seventh graders (mean age 12.9 years) who reside in public housing developments in New York City (n = 624). The addresses of participants in a larger investigation of the aetiology and prevention of smoking were checked to determine if they lived in one of 335 public housing developments in New York City. All participants living in public housing developments were included in the current study. MAIN OUTCOME MEASURES: African-American and Hispanic students completed questionnaires about their cigarette use, social pressures to smoke, smoking attitudes, smoking knowledge, and smoking resistance skills. Students also provided information on demographic and behavioural control (such as church and school attendance). RESULTS: Logistic regression analyses indicated that social influences from friends and family members predicted smoking. Psychosocial characteristics such as advertising resistance skills, anti-smoking attitudes, and refusal skills lowered the odds of smoking. CONCLUSIONS: These findings suggest that smoking prevention approaches targeted at these young people should increase their awareness of social pressures to smoke, correct misperceptions about the prevalence of smoking among friends, and teach relevant psychosocial skills.     

Semiconductor-to-metallic phase transition of VO<Subscript>2</Subscript> by laser excitation

VO₂ thin films deposited on MgO and fused silica glass substrates were prepared by the pulsed laser deposition (PLD) technique, which shows phase transition (PT) from the monoclinic semiconductor phase to a metallic tetragonal rutile structure at temperatures over 68°C. The observed PT is reversible, showing a typical hysteresis. The PT can also be induced through optical pumping by laser excitation. In this case, it was found that the optically induced PT is ultrafast and passive, but not thermally initiated. In order to understand the PT mechanism, a study of transient holography using degenerate-four-wavemixing (DFWM) measurement was conducted. A Nd:YAG pulsed laser with pulse duration of 30 psec operating at 532 nm was employed as the coherent light source. This showed that the observed transient holography in VO₂ thin film is associated with the excited state dynamical process, which essentially causes the structural change, or so-called optically induced PT. The observed extremely large polarizability is believed to relate to the large offset in the potential well minimum between the ground state and excited state. Through an unidentified intermediate state, the transient lattice distortion triggered the structural change.     

Impact of growth rate on the quality of ZNS-MQW InGaAsP/InP laser structures grown by LP-MOVPE

We investigated the influence of the growth rate on the quality of zero-net-strained InGaAsP/InGaAsP/InP multiquantum well structures for 1.55 μm emission grown by low pressure metalorganic vapor phase epitaxy. The samples consisted of fixed compressive strained wells (ɛ=+1%) and tensile strained barriers (ɛ=−0.5%) grown with different quaternary bandgap wavelengths (λ_B=1.1–1.4 μm). Using higher growth rates, we obtained for the first time high quality zero net strained multi quantum well structures, regardless having constant group V composition in the well and barriers. The samples were analyzed by x-ray diffraction, photoluminescence and atomic force microscopy techniques. The amplitude of surface modulation roughness along [011] direction decreased from 20 nm to 0.53 nm with increasing growth rate and/or quaternary compositions grown outside the miscibility gap. A new deep PL broad emission band strongly correlated with the onset of wavy layer growth is also reported. Broad area and ridge waveguide lasers with 10 wells exhibited low losses (34 cm⁻¹) and low threshold current densities at infinite cavity length (1020 A·cm⁻² and 1190 A·cm⁻², respectively).     

Teaching communication skills to hearing-impaired children

The Mehida multimedia system offers hearing-impaired children an easy and appealing way to learn how to communicate with their hearing and deaf peers. Mehida helps them acquire various communication skills simultaneously: sign language, speech, fingerspelling, lip reading, reading, and writing. Didactic activities and games teach the different means of communication. A character shaped like a pear assists and guides the children, explaining each activity and encouraging the children to identify with it throughout the process