铅在氧化铝微粒上吸附的扫描电镜观察

通过使用含醋酸-磷酸配位体溶液与否进行了两种溶液的实验对微量金属Pb在A l2O3微粒上的结合进行了研究.根据溶液中的化学反应平衡常数的平衡计算,可以显示每种溶液中相应的pH值时会生成Pb的各种可溶性复合物和Pb的沉淀物.借助扫描电子显微镜(SEM)及其必要的辅助手段X线光谱微量分析技术在微观水平上很好地观察并区分重金属Pb在A l2O3微粒表面上是以复合物形式吸附还是以氢氧化物沉淀形式存在这一有趣现象.在电镜下,Pb的复合物[Pb(CH3COO)2]、[Pb(CH3COO)+]、[PbHPO4]和[PbH2PO4+]在A l2O3微粒表面上的吸附显示为许多界限不清的弥漫明亮区.而Pb在A l2O3微粒表面上所形成的PbO沉淀则显示为许多近似环形的界限清楚的明亮区.     

Audio-visual speech asynchrony detection using co-inertia analysis and coupled hidden markov models

This paper addresses the subject of liveness detection, which is a test that ensures that biometric cues are acquired from a live person who is actually present at the time of capture. The liveness check is performed by measuring the degree of synchrony between the lips and the voice extracted from a video sequence. Three new methods for asynchrony detection based on co-inertia analysis (CoIA) and a fourth based on coupled hidden Markov models (CHMMs) are derived. Experimental comparisons are made with several methods previously used in the literature for asynchrony detection and speaker location. The reported results demonstrate the effectiveness and superiority of the proposed new methods based on both CoIA and CHMMs as asynchrony detection methods.     

Effect of inoculation of Carnobacterium divergens V41, a bio-preservative strain against Listeria monocytogenes risk, on the microbiological, chemical and sensory quality of cold-smoked salmon

The aim of this study was to develop a bio-preservation strategy for cold-smoked salmon (CSS) by the use of lactic acid bacteria previously selected for their capability to inhibit the growth of Listeria monocytogenes in the product. The spoiling potential of three Carnobacterium strains (Carnobacterium divergens V41, Carnobacterium piscicola V1 and SF668) was tested in sterile CSS blocks inoculated by 10(4-5) CFU g(-)(1) and stored under vacuum for 9 days at 4 degrees C followed by 19 days at 8 degrees C. C. divergens V41 grew a little faster than the other strains and none of the three carnobacteria showed any adverse effect on quality of the product, i.e. no off-odour detected by a trained panel, no total volatile basic nitrogen (TVBN) production, no acidification and no biogenic amine except a slight production of tyramine. An application on commercial CSS was tested by spraying C. divergens V41 (10(4-5) CFU g(-1)) on slices of four batches freshly processed in different smoke-houses. Microbial, chemical and sensory characteristics were weekly compared to a control during 4 weeks of vacuum storage. When the natural microflora was initially weak (two batches<20 CFU g(-1)), C. divergens V41 quickly reached 10(7-8) CFU g(-1) and a slight inhibition of endogenous Enterobacteriaceae, lactobacilli and yeasts was observed. The presence of C. divergens V41 was slightly detected (odour and flavour) but none of the sample was considered as spoiled by the sensory panel. When the natural microflora was initially high (2 batches>10(4-5) CFU g(-1)), no effect on the microflora, TVBN and biogenic amine production, nor on the sensory characteristics was observed in presence of C. divergens V41. In conclusion, bio-preservation of CSS using lactic acid bacteria such as C. divergens V41 is a promising way to inhibit the growth of pathogenic bacteria such as L. monocytogenes with low effect on the quality of the product.     

A Complete Separation of Hexane Isomers by a Functionalized Flexible Metal Organic Framework

The separation ability of branched alkane isomers (nHEX, 3MP, 22DMB) of the flexible and functionalized microporous iron(III) dicarboxylate MIL‐53(Fe)‐(CF₃)₂ solid is evaluated through a combination of breakthrough experiments (binary or ternary mixtures), adsorption isotherms, X‐ray diffraction temperature analysis, quasi‐elastic neutron scattering measurements and molecular dynamics simulations. A kinetically controlled molecular sieve separation between the di‐branched isomer of hexane 22DMB from a mixture of paraffins is achieved. The reported total separation between mono‐ and di‐branched alkanes which was neither predicted nor observed so far in any class of porous solids is spectacular and paves the way towards a potential unprecedented upgrading of the RON of gasoline.     

Investigation of LSPR Coupling Effects toward the Rational Design of CsxWO3–δ Based Solar NIR Filtering Coatings

The optical range of localized surface plasmon resonance (LSPR) is extended into the infrared region, thanks to the development of highly doped semiconductor nanocrystals. Particularly, the near-infrared (NIR) range holds a significant interest in managing solar radiation. However, practical applications necessitate the arrangement of particles, which is known to possibly impact their optical properties through LSPR coupling effects. How such coupling modifies the LSPR response in semiconductor hosts remains largely unexplored. In this study, a protocol for producing composite coatings composed of cesium-doped tungsten bronze nanocrystals embedded in a silica matrix is presented. Achieving individual dispersion of nanocrystals is made possible through careful selection of a surface polyglycerol ligand exchange. This allows to tune the interparticle distance by adjusting the nanocrystal volume fraction in the composite. The findings demonstrate that LSPR coupling effects significantly influence the LSPR intensity of nanocrystals in the composite when the nanocrystal-to-nanocrystal distance matches their size. Beyond elucidating the LSPR coupling effect, this study provides insights into the potential use of Cs-HTB nanocrystals for solar control applications. Through the optimization of morphology and film structure, remarkable selectivity is obtained in terms of maintaining good transparency in the visible range while achieving high absorption in the NIR.     

Modifications to bicarbonate conductivity: A way to increase phosphate removal during hemodialysis? Proof of concept

Introduction Hyperphosphatemia and cardiovascular mortality are associated particularly with end‐stage renal disease. Available therapeutic strategies (i.e., diet restriction, calcium [or not]‐based phosphate binders, calcimimetics) are associated with extrarenal blood purification. Compartmentalization of phosphate limits its depuration during hemodialysis. Several studies suggest that plasmatic pH is involved in the mobilization of phosphate from intracellular to extracellular compartments. Consequently, the efficiency of modified bicarbonate conductivity to purify blood phosphate was tested. Methods Ten hemodialysis patients with chronic hyperphosphatemia (>2.1 mmol/L) were included in the two three–sessions‐per week periods. Bicarbonate concentration was fixed at 40 mmol/L and 30 mmol/L in the first and second periods, respectively. Phosphate depuration was evaluated by phosphate mobilization clearance (K_M). Findings Although bicarbonatemia was lower during the second period (21.0 ± 2.7 vs. 24.4 ± 3.1 mmol/L, P < 0.01), no difference was observed in phosphatemia (2.4 ± 0.5 vs. 2.3 ± 0.4 mmol/L, P = NS). The in‐session variation of phosphate was lower (?1.45 ± 0.42 vs. ?1.58 ± 0.44 mmol/L, P < 0.05) and K_M was higher during the second period (82.94 ± 38.00 vs. 69.74 ± 24.48 mL/min, P < 0.05). Discussion The decrease of in‐session phosphate and the increase in K_M reflect phosphate refilling during hemodialysis. Thus, modulation of serum bicarbonate may play a role in controlling the phosphate pool. Even though correcting metabolic acidosis during hemodialysis remains important, alkaline excess can impair phosphate mobilization clearance. Clinical trials are needed to test the efficiency and relevance of a strategy where bicarbonatemia is corrected less at the beginning of sessions.     

Equivalent network representation of boundary conditions involving generalized trial quantities

Virtual adjustable sources are introduced in equivalent network representation of boundary conditions. For this purpose, integral equations are to be solved simple application of analog Kirchoff’s and Ohm’s laws. These adjustable sources represent generalized trial quantities. In order to illustrate this proposed approach, equivalent network representation of lossy planar transmission lines with arbitrary metallization thickness is presented.     

Microwave active resonator band-pass filters in various mmic technologies

In this article, two topologies of L-C parallel active resonators are presented. These circuits are realized in MMIC technology, using three transistors which could be MESFET, hemt or HBT. The survey of these resonators shows the possibility, by controling the values of a resistor and/or a capacitor, on the one hand, to tune the resonance frequency of these circuits, and on the other hand, to cancel out their losses so as to obtain negative conductance. Compact, lossless and narrow-band filters are then implemented using previous active resonators. To date, the use of mesfet technology has reduced the synthesis of such active filters in S-band and at X-band low frequencies. Now, however, hemt and HBT technologies allow the extension of their implementation to the whole X-band. This survey is illustrated by the simulated response of a 10 GHz filter with a 500 MHz 3 dB bandwidth. The mmic technology is a 0.2 μm hemt one. The simulated performances of this filter achieve a mean transmission gain of 0. 5 dB, with a reflection loss higher than 10 dB at 10 GHz,     

Comparing Linear Viscoelastic Properties of Asphalt Concrete Measured by Laboratory Seismic and Tension–Compression Tests

Seismic measurements and conventional cyclic loading have been applied to a cylindrical asphalt concrete specimen to compare the complex modulus and complex Poisson’s ratio between the two testing methods. The seismic moduli and Poisson’s ratio have been characterized by optimizing finite element calculated frequency response functions to measurements performed at different temperatures. An impact hammer and an accelerometer were used to measure the frequency response functions of the specimen which was placed on soft foam for free boundary conditions. The cyclic loading was performed by applying both tension and compression to the specimen while measuring the displacements in the axial and radial direction. The Havriliak–Negami and the 2S2P1D model have been used to estimate master curves of the complex modulus and complex Poisson’s ratio from the seismic and the tension–compression tests. The seismic measurements performed at a lower strain level than the tension–compression test give a higher absolute value of the complex moduli (e.g. \({\sim }12\,\%\) at 100 Hz) and a lower phase angle compared to the tension–compression results.