Reversible crosslinking in cellulose. I. Determination of mercaptan and disulfide in modified cotton

Mercaptan and disulfide contents of modified cotton fabrics could be determined by application of Leach's polarographic method for wool, with minor modification. It was found that mercaptocellulose prepared by the reaction of tosyl cellulose and potassium thiolacetate followed by alkaline hydrolysis contained considerable amounts of disulfided in addition to mercaptain. Iodometric titration of mercaptocellulose gave a higher value of mercaptan than that obtained by the polarographic method. The mercaptan and disulfide contents and methylene blue uptake of the iodine-treated samples indicate that some of the mercaptan groups further undergo oxidation to acidic groups as a result of the iodine treatment. The spatial effect in the oxidation of mercapto groups in modified cotton is briefly discussed.     

Noncompetitive inhibition by L-cysteine and activation by L-glutamate of the iron-oxidizing activity of a mixotrophic iron-oxidizing bacterium strain OKM-9

A mesophilic, mixotrophic iron-oxidizing bacterium strain OKM-9 uses ferrous iron as a sole source of energy and L-glutamate as a sole source of cellular carbon. Uptake of L-glutamate into OKM-9 cells is absolutely dependent on ferrous iron oxidation. Thus, the Fe(2+)-dependent L-glutamate uptake system of strain OKM-9 is crucial for the bacterium to grow mixotrophically in iron medium with L-glutamate. The relationship between iron oxidation and L-glutamate transport activities was studied. Iron oxidase containing cytochrome a was purified 9-fold from the plasma membrane of OKM-9. A purified iron oxidase showed one rust-colored band following disc gel electrophoresis after incubation with Fe(2+). The Fe(2+)-dependent L-glutamate transport system was also purified 14.5-fold from the plasma membrane using the same purification steps as for iron oxidase. Fe(2+)-dependent L-glutamate and L-cysteine uptake activities of OKM-9 were 0.36 and 0.24 nmol/mg/min, respectively, when a concentration of 18 mM of these amino acids was used as a substrate. Both uptake activities were completely inhibited by potassium cyanide (KCN), suggesting that cytochrome a in the iron oxidase is involved in the transport process. The iron-oxidizing activity of strain OKM-9 was activated 1.7-fold by 80 mM L-glutamate. In contrast, the activity was noncompetitively inhibited by L-cysteine. The Michaelis constant of iron oxidase for Fe(2+) was 12.6 mM and the inhibition constant for L-cysteine was 41.6 mM. A marked inhibition of iron oxidase by 50 mM L-cysteine was completely reversed by the addition of 60 mM L-glutamate. The results suggest the possibility that iron oxidase has a binding site for L-cysteine and the cysteine first bound to the iron oxidase was replaced by the added L-glutamate.     

Phase relations and thermodynamic properties of the uranium-nitrogen system

The present state of knowledge of the phase relations and thermodynamic properties of the uranium-nitrogen system is given. Emphasis is placed on the nonstoichiometric and thermodynamic properties of uranium sesquinitride. The present paper consists of two parts. The first part is on the phase relations; an equilibrium phase diagram is proposed, and the relationship between structure and lattice parameter for the α-U₂N₃-UN₂ system is shown. The second part deals with thermodynamic properties of UN and α-U₂N₃; the data on decomposition pressures, specific heats, and heats and free energies of formation are summarized and evaluated.     

Activated carbon adsorption of trichloroethylene (TCE) vapor stripped from TCE-contaminated water

Ground water contaminated with trichloroethylene (TCE) used in electronic, electric, dry cleaning and the like industries is often treated by air-stripping. In this treatment process, TCE in its vapor form is stripped from ground water by air stream and sometimes emitted into the atmosphere without any additional treatments. Activated carbon adsorption is one of the practical and useful processes for recovering the TCE vapor from the exhaust air stream. However, adsorption of the TCE vapor from the stripping air stream onto activated carbons is not so simple as that from dry air, since in the exhaust air stream the TCE vapor coexists with water vapor with relatively high concentrations. The understanding of the adsorption characteristics of the TCE vapor to be adsorbed on activated carbon in the water vapor-coexisting system is essential for successfully designing and operating the TCE recovery process. In this work, the adsorption equilibrium relations of the TCE vapor adsorption on activated carbons were elucidated as a function of various relative humidity. Activated carbon fibers (ACFs) were used as model activated carbon. The adsorption equilibrium relations were studied by the column adsorption method. The adsorption isotherms of TCE vapor adsorbed on sample ACFs were successfully correlated by the Dubinin-Radushkevich equation for both cases with and without coexistent water vapor. No effects of coexistent water vapor were found on the limiting adsorption volume. However, the adsorption characteristic energy was significantly reduced by the coexistence of water vapor and its reduction was successfully correlated with the equilibrium amount of water vapor adsorbed under the dynamic condition.     

The relationship between electropermeabilization and cell cycle and cell size of Saccharomyces cerevisiae

Yeast cells (Sacchromyces cerevisiae) in 0.9% NaCl solution containing phloxine B (dye) were treated by an application of a rectangular electric pulse. We input microscopic images of the yeast suspensions after the application into a computer, and measured whether each cell dyes or not, the phase in the cell cycle, and each cell size, using the software we had developed. After those measurements, we discussed the relationship between the yield of electropermeabilization (the ratio of dyed cells to the total cell number) and the phase in the cell cycle, and cell size. From the results, it was found that the yeast cells from S-phase to M-phase (S-M phase) in the cell cycle tend to be more permeated than G1-phase yeast cells, and in both phases the yield decreases with the increase in cell size.     

Effect of Impurities on the Electronic Structure of Vortex Core Investigated by Microwave Surface Impedance Measurement

We investigated the microwave surface impedance in Zn doped YBa₂Cu₃O _y . For low Zn concentrations, crossover frequency _p and viscosity of vortex do not change significantly (at maximum, factor of 2). This is in sharp contrast to the dramatic change in the zero-field quasiparticle scattering time. The robust nature of viscosity on the impurity doping suggests that the quasiparticle scattering time in the vortex core is determined by a different mechanism from that outside the core.     

Preparation of plastic spherical microlenses by use of a fluoropolymer stencil and oil-bath heating

A new method for fabricating plastic spherical microlenses was developed, which allowed self-alignment of lenses and self-organized formation of a spherical shape. First a low-surface-energy fluoropolymer thin film was deposited and patterned as a stencil. Then photosensitive phenol resin was patterned on it as the lens material. Finally the resin was annealed in an oil bath to form a sphere. The molten phenol resin spontaneously formed a sphere and positioned itself in the center of the fluoropolymer ring pattern as a result of the difference of surface free energy and the equivalently zero-gravity condition in the oil bath. When a light-emitting-diode printer head was loaded with spherical microlenses, its optical output increased by 1 order of magnitude.     

Electrochemical protein chip with arrayed immunosensors with antibodies immobilized in a plasma-polymerized film

An electrochemical protein chip was microfabricated. A thin-film three-electrode system, including an array of 36 platinum working electrodes, a set of thin-film Ag/AgCl electrodes, and platinum auxiliary electrodes, was integrated on a glass substrate. Capture antibodies were immobilized in a 4.5-nm-thick double layer of a hexamethyldisiloxane plasma-polymerized film. Because of their highly cross-linked network structure, the capture antibodies could be firmly immobilized. No nonspecific adsorption was observed during a series of procedures to detect target proteins, and electrochemical cross talk between neighboring sites was negligible. The sandwich immunoassay was conducted on a single chip using model proteins, alpha-1-fetoprotein and beta2-microglobulin. A distinct current increase following the oxidation of hydrogen peroxide produced by the enzymatic reaction of glucose oxidase was observed, which indicates that the capture proteins could actually bind the target proteins. Two kinds of protein were detected independently on multiple sites with respective capture antibodies.     

Lipid analog with 2-nitrophenol trigger designed for liposome fusion at physiological pH

A novel lipid analog with two long alkyl (C₁₆) chains, an aspartate skeleton, a connecting alkyl (C₈) chain, and 2-nitrophenol trigger group is synthesized by an efficient synthetic route, which can induce liposome fusion at physiological pH.     

High‐efficiency light‐collection optics for lamp‐based projection TV

Abstract— A new light‐collection optics has been developed that enhances the luminance of projection TV which use lamps as the light source. The conventional optical system consists of an elliptical reflector and a flat‐surface front glass, but these systems cannot sufficiently collect the beams coming from the light source, and they cause loss in the coupling with the light pipe. To solve this problem, we devised a new optical system through a structure of an aspherical reflector and an aspherical front glass. This new optical system concentrates the beams coming from the light source to a smaller point which improves the coupling efficiency. Thus, we have successfully increased the luminance of the projection TV by approximately 10%. This paper reports the design principles of the new optical system and the results of a prototype experiment.