Evaluation of indoor gamma radiation dose in dwellings

The use of materials containing naturally occurring radionuclides for house construction may enhance the natural radiation background to which some population groups are exposed. External exposure results from gamma emitter radionuclides existing in the walls, floor and ceiling. Mathematical models can be used to predict external dose rates inside a room, provided the compartment geometry and the radionuclide concentration activities are known. This paper presents a methodology and a computer code for theoretical evaluation of indoor external gamma doses in the air. The room was modelled as three pairs of rectangular slabs of finite thickness. Doses were evaluated by applying a photon transport model, taking into account self-absorption and radiation build-up. Calculations were performed for 40K, 226Ra and 232Th, considering concrete walls. The results obtained show good agreement with those reported in the literature. Dose conversion factors are presented in a practical manner, ready to use for radiological impact screening.     

Soybean and milk proteins modified by transglutaminase improves chicken sausage texture even at reduced levels of phosphate

Consumer demands for poultry processed meats have increased due to low fat content. In this experiment, chicken sausages were manufactured with various biopolymers prepared from soybean protein, casein, whey protein isolate (WPI), mixtures of soybean protein and casein, and soybean protein and WPI. The extent of various biopolymer formations was determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and high performance liquid chromatography. Cross-linking soybean protein and casein or WPI by transglutaminase provided biopolymers with improved heat stability and emulsifying property. Shear force of chicken sausages were measured to evaluate the addition of biopolymer on the hardness in the presence of 0.05 or 0.2% sodium tripolyphosphate (STPP). The texture of chicken sausages was improved by the addition of such biopolymers even in the presence of 0.05% STPP. These results suggested that chicken sausage texture was improved by the formation of network structures that contribute to hardness of sausage gels with the addition of biopolymers. Thus, addition of biopolymers in the manufacture of chicken sausages may permit reduction in phosphate content without loss in texture.     

Effects of hydrophilicity of crosslinker on membrane properties of poly(N-hydroxyethyl-L-glutamine) hydrogels

Summary Poly(N-hydroxyethyl-L-glutamine) (PHEG) hydrogels were prepared by aminolysis of poly( -benzyl L-glutamate) with 2-aminoethanol and hydrophobic or hydrophilic crosslinkers, and the effect of the hydrophobicity of the crosslinkers was evaluated. The swelling properties, tensile properties and enzymatic degradation behavior were studied in phosphate buffered saline (PBS). The swelling ratio and degradation rate of these hydrogels were highly dependent on the hydrophobicity of the crosslinkers, while tensile properties were dependent on the swelling ratio, but not on the hydrophobicity of the crosskinkers.     

Preparation of plastic spherical microlenses by use of a fluoropolymer stencil and oil-bath heating

A new method for fabricating plastic spherical microlenses was developed, which allowed self-alignment of lenses and self-organized formation of a spherical shape. First a low-surface-energy fluoropolymer thin film was deposited and patterned as a stencil. Then photosensitive phenol resin was patterned on it as the lens material. Finally the resin was annealed in an oil bath to form a sphere. The molten phenol resin spontaneously formed a sphere and positioned itself in the center of the fluoropolymer ring pattern as a result of the difference of surface free energy and the equivalently zero-gravity condition in the oil bath. When a light-emitting-diode printer head was loaded with spherical microlenses, its optical output increased by 1 order of magnitude.     

Measurement of air turbulence for on-machine interferometry

There is increasing demand for in situ shape measurements performed on ultraprecision processing machines. One major source of error during interferometric measurements performed on machines is fringe displacement due to external disturbances. We have developed an interferometer equipped with an electro-optic phase modulator that measures the phase of interference fringes before they are displaced by air turbulence. The frequency characteristics of air turbulence induced by a heat source are derived from successive measurements of a test surface. Experimental results show that the phase of the interference fringes can be accurately measured in the presence of air turbulence when the intensity of the fringes is sampled at a speed of several hundred hertz.     

On-demand droplet spotter for preparing pico- to femtoliter droplets on surfaces

A droplet spotter for on-demand generation of pico- to femtoliter droplets was developed to meet the requirement for high-density spotting of chemicals on a surface. Our droplet spotter involves applying a approximately 1000-V and approximately 10-ms pulse voltage to the tip of a capillary tube (o.d. approximately 18 microns; i.d. approximately 11 microns) supplied with water or a dye solution. The capability of the spotter was demonstrated by preparing a microarray of dye molecules. The microarray was prepared by spotting approximately 30-fL droplets of a dye solution on a surface at the density of one spot per 20 x 20 micron 2.     

Analysis of Polarization Splitters Composed of Multilayer Thin-Film Waveguides Using the Beam-Propagation Method Based on Yee's Mesh

Multilayer thin-film waveguides (MTFWs) are analyzed using the beam-propagation method based on Yee's mesh. The birefringence properties of the MTFW are demonstrated by the eigenmode analysis based on the imaginary-distance procedure. Taking advantage of the birefringence, a polarization splitter composed of two parallel MTFWs is proposed. Calculation shows that a short device length of 270 mum is obtainable with crosstalks of -33.5 dB for the quasi-transverse-electric mode and -20.7 dB for the quasi-transverse-magnetic mode. A crossing-type polarization splitter is also developed, and the device length is further reduced to 120 mum.     

Positioning device for outdoor mobile robots using optical sensors and lasers

We propose a novel method for positioning a mobile robot in an outdoor environment using lasers and optical sensors. Position estimation via a noncontact optical method is useful because the information from the wheel odometer and the global positioning system in a mobile robot is unreliable in some situations. Contact optical sensors such as computer mouse are designed to be in contact with a surface and do not function well in strong ambient light conditions. To mitigate the challenges of an outdoor environment, we developed an optical device with a bandpass filter and a pipe to restrict solar light and to detect translation. The use of two devices enables sensing of the mobile robot’s position, including posture. Furthermore, employing a collimated laser beam allows measurements against a surface to be invariable with the distance to the surface. In this paper, we describe motion estimation, device configurations, and several tests for performance evaluation. We also present the experimental positioning results from a vehicle equipped with our optical device on an outdoor path. Finally, we discuss an improvement in postural accuracy by combining an optical device with precise gyroscopes.     

Numerical Evaluation of Toughening by Crack-Face Grain Interlocking in Self-Reinforced Ceramics

Crack bridging associated with the pull-out process of interlocking grains in self-reinforced ceramic materials is studied through a micromechanical simulation. The pullout of a single inclined grain is modeled via the numerical solution of a general contact problem. The bridging-force versus crack-opening-distance curve indicates a nonlinear, springlike response for the pullout of interlocking grains. The sliding friction along the debonded interface, induced by highly localized contact stresses, dominates the total bridging force. The bridging force increases with grain inclination until eventual bridge failure. The pullout of misaligned grains mainly affects short-crack toughening, with a rising R -curve, whereas aligned grains contribute to long-crack toughening. The residual stresses of the thermal expansion anisotropy play a minor role in the pull-out process of grain interlocking and the resultant toughening. The proposed mechanism is operative in both single-phase and composite ceramics in which pullout of elongated grains/reinforcements occurs.