Significant Improvement in Activity and Stability of Pt/TiO2 Catalyst for Water Gas Shift Reaction Via Controlling the Amount of Na Addition

Na promoted Pt/TiO₂ catalysts have been studied under high severity, near equilibrium, conditions for use as a single stage WGS catalyst. Addition of 3 wt% Na to a 1 wt% Pt/TiO₂ catalyst has been found to improve water gas shift activity significantly compared to Pt/TiO₂, Pt/CeO₂, and Pt–Re/TiO₂ catalysts. This catalyst is stable when the reaction temperature is higher than 250 °C. Deactivation occurred when the reaction temperature was lower than 250 °C, however, returning the temperature to higher than 250 °C fully recovered activity. TEM observations revealed that addition of Na inhibited Pt particle sintering. These results suggest that Na promoted Pt/TiO₂ is a promising single stage water gas shift catalyst for small scale hydrogen production.     

The Chitinolytic Activities of Streptomyces sp. TH-11

Chitin is an abundant biopolymer composed of units of N-acetyl-D-glucosamine linked by β-1,4 glycosidic bonds. Chitin is the main component of the shells of mollusks, the cell wall of fungi and yeast and of the exoskeleton of crustaceans and insects. The degradation of chitin is catalyzed by chitinases that occur in a wide range of organisms. Among them, the chitinases from microorganisms are extremely important for the degradation and recycling of the carbon and nitrogen trapped in the large amount of insoluble chitin in nature. Streptomyces sp. TH-11 was isolated from the sediment of the Tou-Chien River, Taiwan. The chitinolytic enzyme activities were detected using a rapid in-gel detection method from the cell-free preparation of the culture medium of TH-11. The chitinolytic enzyme activity during prolonged liquid culturing was also analyzed by direct measurement of the chitin consumption. Decomposition of the exoskeleton of shrimps was demonstrated using electron microscopy and atomic force microscopy.     

Energy Efficiency of the Outotec<Superscript>®</Superscript> Ausmelt Process for Primary Copper Smelting

The global, non-ferrous smelting industry has witnessed the continual development and evolution of processing technologies in a bid to reduce operating costs and improve the safety and environmental performance of processing plants. This is particularly true in the copper industry, which has seen a number of bath smelting technologies developed and implemented during the past 30 years. The Outotec^® Ausmelt Top Submerged Lance Process is one such example, which has been widely adopted in the modernisation of copper processing facilities in China and Russia. Despite improvements in the energy efficiency of modern copper smelting and converting technologies, additional innovation and development is required to further reduce energy consumption, whilst still complying with stringent environmental regulations. In response to this challenge, the Ausmelt Process has undergone significant change and improvement over the course of its history, in an effort to improve its overall competitiveness, particularly with respect to energy efficiency and operating costs. This paper covers a number of recent advances to the technology and highlights the impacts of these developments in reducing energy consumptions for a range of different copper flowsheets. It also compares the energy efficiency of the Ausmelt Process against the Bottom Blown Smelting process, which has become widely adopted in China over the past 5–10 years.     

Corrosion protection of molybdate doped polypyrrole film prepared in succinic acid solution

ABSTRACT

Polypyrrole (PPy) was prepared on the mild steel substrate by electrochemical polymerisation in the solution containing pyrrole monomer and succinic acid. The mild steel surface could be passivated before and during electropolymerisation by molybdate. The morphology and structure of the PPy film were studied with SEM. The typical cauliflower structure of PPy was observed. Raman and IR spectroscopy showed that the obtained PPy was in an oxidised state. The thermal stability of PPy was investigated by the thermal gravimetric analysis, showing that PPy was stable at higher than 480°C. The electrochemical property of the PPy film was performed by open circuit potential, polarisation curves (I/E), and electrochemical impedance spectroscopy. The corrosion behaviour of mild steel (CT3) with PPy film in solution NaCl 3% was studied.

This paper is part of a supplementary issue from the 17th Asia-Pacific Corrosion Control Conference (APCCC-17).     

Simulated Microgravity Inhibits the Proliferation of Chang Liver Cells by Attenuation of the Major Cell Cycle Regulators and Cytoskeletal Proteins

Simulated microgravity (SMG) induced the changes in cell proliferation and cytoskeleton organization, which plays an important factor in various cellular processes. The inhibition in cell cycle progression has been considered to be one of the main causes of proliferation inhibition in cells under SMG, but their mechanisms are still not fully understood. This study aimed to evaluate the effects of SMG on the proliferative ability and cytoskeleton changes of Chang Liver Cells (CCL-13). CCL-13 cells were induced SMG by 3D clinostat for 72 h, while the control group were treated in normal gravity at the same time. The results showed that SMG reduced CCL-13 cell proliferation by an increase in the number of CCL-13 cells in G0/G1 phase. This cell cycle phase arrest of CCL-13 cells was due to a downregulation of cell cycle-related proteins, such as cyclin A1 and A2, cyclin D1, and cyclin-dependent kinase 6 (Cdk6). SMG-exposed CCL-13 cells also exhibited a downregulation of α-tubulin 3 and β-actin which induced the cytoskeleton reorganization. These results suggested that the inhibited proliferation of SMG-exposed CCL-13 cells could be associate with the attenuation of major cell cycle regulators and main cytoskeletal proteins.     

Controlling thickness to tune performance of high-mobility transparent conducting films deposited from Ga-doped ZnO ceramic target

Structure modification has been found to tune significantly the transparent-conducting performance, especially mobility and conductivity of hydrogenated Ga-doped ZnO (HGZO) films. The strong correlation between film thickness and mobility of the films is revealed. The mobility increases quickly with increasing the thickness from 350 to 900 nm, and then tends to be saturated at further thicknesses. A higher mobility than 50 cm²/Vs can be achieved, which is an extra-high value for polycrystalline ZnO films deposited by using the sputtering technique. The thickness-dependent mobility originates from scatterings on grain boundaries and dislocation-induced defects controlled by thin-film growth. Based on the Volmer-Weber model, an expansion model is built up to describe the thickness-dependent crystal growth of the HGZO films, especially at the thick films. As a result, the 800 nm-thick HGZO film obtains the highest performance with high mobility of 51.5 cm²/Vs, low resistivity of 5.3 × 10^?4 Ωcm, and good transmittance of 83.3 %.     

A Comprehensive Approach for Estimating Hydraulic Quantities in a Multi-branched Estuarine System

Despite many previous investigations, there is no theoretically justifiable equation to determine the freshwater discharge, tidal velocity, and salinity in a complex estuary that contains several branches. In this study, the longitudinal distributions of freshwater and salinity concentration in multi-branched estuaries are investigated using a mathematical model, considering the energy balance by frictional head loss and the salt balance by diffusion and advection in a one-dimensional steady-state condition. We attempt to obtain the time-mean freshwater discharge rate quantitatively at a junction where the main flow separates into two branches. The salinity distribution along each branch is calculated by following the dispersion coefficient equation previously proposed for a single estuary. The salinity field is divided into the near-coast region and the upstream region, because in each segment the inland velocity varies according to the tidal flux. For computing the tidal velocity, we propose the Burgers equation and the Hoph-Cole transformation. The theoretical results obtained by these equations were found to be in good agreement with a set of observed data in the Red River estuary system.