Fourier Analysis of Serial Dependence Measures

Classical spectral analysis is based on the discrete Fourier transform of the autocovariances. In this article we investigate the asymptotic properties of new frequency‐domain methods where the autocovariances in the spectral density are replaced by alternative dependence measures that can be estimated by U‐statistics. An interesting example is given by Kendall's τ, for which the limiting variance exhibits a surprising behavior.     

Defect chemistry of langasite III: Predictions of electrical and gravimetric properties and application to operation of high temperature crystal microbalance

The electrical and gravimetric properties of langasite, La₃Ga₅SiO₁₄, are related to its underlying defect and transport processes via previously developed predictive defect and transport models. These models are used here to calculate the dependence of the partial ionic and electronic conductivities and the mass change for langasite as functions of temperature, dopant type and level and pO₂. Doping strategies devised for minimizing conductivity in langasite based on use conditions are described. For example, the required dopant level to achieve minimum conductivity and thus minimum electrical losses in acceptor-doped langasite is shown to depend on the operating pO₂. Likewise intrinsic mass changes in langasite, dependent on dopant level, pO₂ and temperatures, if high enough, can mask mass changes induced in active layers applied to langasite when used as a microbalance. For example, the model predicts that the dopant level in donor-doped langasite has less of an impact on intrinsic mass change due to external environmental changes when compared to acceptor-doped langasite. The models are also applied in defining acceptable operating limits needed to achieve and/or the design of properties for desired levels of microbalance resolution and sensitivity.     

Kommentar I

Ohne Zusammenfassung     

Characterization of metal (Fe,Co, Ni,Cu) and fluorine codoped barium strontium titanate thick-films for microwave applications

The influence of codoping of Fe, Co, Ni, Cu as acceptors and F as donor on the dielectric properties of screen-printed Ba_0.6Sr_0.4TiO₃ ceramic thick-films has been investigated. The undoped and codoped Ba_0.6Sr_0.4TiO₃ powders were synthesized through a sol-gel route. The thermal gravimetric analysis revealed the difference of the thermal decomposition behaviour between the undoped and codoped precursors. The ceramic powders were characterized with x-ray diffraction, scanning electron microscopy and BET measurements. Larger crystallite sizes of the codoped powders were observed. The densification behaviour of the powders was recorded by dilatometry and indicated that codoping influences the sintering mechanism. The permittivity, dielectric loss and tunability of the undoped and codoped thick-films were characterized with coplanar waveguide structures up to 30 GHz.     

A method for determining the flow front velocity of a plastic melt in an injection molding process

During the filling phase of an injection molding process, the flow front velocity of the plastics melt has a decisive influence on the form part quality. It has been believed that a constant flow front velocity of the melt leads to distortion‐free and residual stress‐free form parts. A process control strategy based on a constant flow front velocity of the melt, however, requires the full understanding of the flow front position as a function of the screw position of the injection molding machine. With current methods, this can only be achieved by direct measurements using a number of sensors inside the mold, which leads to complicated structure, great efforts, and high cost for the tooling equipment. This article proposes, designs, and develops an innovative method for determining the flow front velocity of a plastic melt in an injection molding using only one pressure sensor at the front of the screw and based on the idea of mapping a simulated filling process to a real injection molding process. The mapping ensues that the characteristic event points are identified and matched for both the simulated and real filling process. The results of the simulation analysis and experimental evaluation show that the proposed method can be used to determine the flow front position and the resulting flow front velocity of the melt within the cavity of the mold and provide evidence that the new method offers great potential to process control strategies based on machine independent parameters. POLYM. ENG. SCI., 59:1132–1145 2019. © 2019 Society of Plastics Engineers     

Synthesis and Biopharmaceutical Evaluation of Imatinib Analogues Featuring Unusual Structural Motifs

A convenient synthesis of imatinib, a potent inhibitor of ABL1 kinase and widely prescribed drug for the treatment of a variety of leukemias, was devised and applied to the construction of a series of novel imatinib analogues featuring a number of non‐aromatic structural motifs in place of the parent molecule's phenyl moiety. These analogues were subsequently evaluated for their biopharmaceutical properties (e.g., ABL1 kinase inhibitory activity, cytotoxicity). The bicyclo[1.1.1]pentane‐ and cubane‐containing analogues were found to possess higher themodynamic solubility, whereas cubane‐ and cyclohexyl‐containing analogues exhibited the highest inhibitory activity against ABL1 kinase and the most potent cytotoxicity values against cancer cell lines K562 and SUP‐B15. Molecular modeling was employed to rationalize the weak activity of the compounds against ABL1 kinase, and it is likely that the observed cytotoxicity of these agents arises through off‐target effects.     

Processing of wood plastic composites: The influence of feeding method and polymer melt flow rate on particle degradation

Spruce wood particle (WP)/polypropylene (PP) compounds were prepared in an internal mixer using different rotor speeds. To analyze the effect of feeding method on particle degradation, WP and PP were either fed as dry‐blend or WP was fed into the PP melt. To prevent melt freezing, pre‐heated WP were used as comparison to cold WP. In addition, WPs were compounded with different grades of PP or high‐density polyethylene (HDPE) to analyze the effect of polymer matrix melt flow rate (MFR) on particle degradation. Mixing behavior of compounds containing 30% and 70% (w/w) WP depended on feeding method, represented by a changing relation of final torque values. Feeding as dry‐blend and using pre‐heated particles led to stronger WP degradation. Degradation decreased with increasing polymer MFR. For PP compounds, particle degradation was stronger when containing 70% WP, for HDPE the difference due to WP content was only marginal. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43231.     

Exposure to virtual nature: the impact of different immersion levels on skin conductance level,heart rate,and perceived relaxation

Virtual Reality - It is generally accepted that natural environments reduce stress and improve mood. Since access to natural environments is sometimes limited, virtual natural environments,...     

Range mode and range median queries in constant time and sub-quadratic space

Given a list of n items and a function defined over sub-lists, we study the space required for computing the function for arbitrary sub-lists in constant time.For the function mode we improve the previously known space bound O(n²/logn) to O(n²loglogn/log²n) words.For median the space bound is improved to O(n²loglog²n/log²n) words from O(n²⋅log(k)n/logn), where k is an arbitrary constant and log(k) is the iterated logarithm.